当前位置: X-MOL 学术Luminescence › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Thermoluminescence study of CaNa2(SO4)2 phosphor doped with Eu3+ and synthesized by combustion method
Luminescence ( IF 3.2 ) Pub Date : 2020-08-25 , DOI: 10.1002/bio.3940
S R Bargat 1, 2 , Yatish R Parauha 1 , G C Mishra 2 , S J Dhoble 1
Affiliation  

In the present study, the thermoluminescence (TL) properties of an Eu3+-doped CaNa2(SO4)2 phosphor were studied. The Eu3+-doped CaNa2(SO4)2 phosphor was synthesized using the combustion method. The samples were well crystallized in the monoclinic phase. The TL glow curve of the Eu3+-doped CaNa2(SO4)2 phosphor showed a single prominent peak at around 210°C with showed linearity on increasing exposure. The response curve of the synthesized phosphor showed linearity in the range 500–7000 Gy. Trapping parameters of synthesized phosphors such as activation energy, frequency factor, and order of kinetics were calculated in the study. These trapping parameters were determined by different methods such as Chen’s peak method, the initial rise method, and Ilich’s method. Each characteristic of these outcomes demonstrated that the synthesized Eu3+-doped CaNa2(SO4)2 phosphor had outstanding TL properties and might be valuable for TL dosimetry application.

中文翻译:

Eu3+掺杂燃烧法合成CaNa2(SO4)2荧光粉的热致发光研究

在本研究中,研究了Eu 3+掺杂的CaNa 2 (SO 4 ) 2荧光粉的热致发光(TL)特性。使用燃烧法合成了Eu 3+掺杂的CaNa 2 (SO 4 ) 2荧光粉。样品在单斜晶相中结晶良好。Eu 3+掺杂的CaNa 2 (SO 4 ) 2的TL发光曲线荧光粉在 210°C 左右显示出一个突出的峰值,随着曝光的增加显示出线性。合成荧光粉的响应曲线在 500-7000 Gy 范围内呈线性。在研究中计算了合成荧光粉的捕获参数,例如活化能、频率因子和动力学顺序。这些捕获参数是通过不同的方法确定的,例如 Chen 的峰值法、初始上升法和 Ilich 法。这些结果的每个特征都表明,合成的 Eu 3+掺杂的 CaNa 2 (SO 4 ) 2荧光粉具有出色的 TL 特性,可能对 TL 剂量测定应用有价值。
更新日期:2020-08-25
down
wechat
bug