当前位置: X-MOL 学术Int. J. Chem. Eng. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Chemical Oxidation for Oil Separation from Oilfield Produced Water under UV Irradiation Using Titanium Dioxide as a Nano-Photocatalyst by Batch and Continuous Techniques
International Journal of Chemical Engineering ( IF 2.3 ) Pub Date : 2019-06-24 , DOI: 10.1155/2019/9810728
Ali A. Hassan 1 , Khalid M. Mousa Al-zobai 2
Affiliation  

This research describes the photocatalytic design for oil removal from produced water. It involves batch and continuous processes. The photocatalytic degradation of oil has been conducted in glass reactors. The effects of nano-TiO2 concentration, the number of lamps, and the time of radiation were studied in the batch system, while in the continuous treatment, the number of lamps, the direction of light radiation, and the time of processes were studied. The results showed that all the oil was removed in the batch system and the maximum percentage of oil removal was 71% in the continuous system.

中文翻译:

分批连续技术以二氧化钛为纳米光催化剂的紫外辐照分离油田采出水油的化学氧化

这项研究描述了从采出水中除油的光催化设计。它涉及批量和连续过程。油的光催化降解已在玻璃反应器中进行。在分批系统中研究了纳米TiO 2浓度,灯的数量和辐射时间的影响,而在连续处理中,研究了灯的数量,光辐射的方向和过程的时间。 。结果表明,在间歇系统中,所有油均被去除,在连续系统中,最大除油百分比为71%。
更新日期:2019-06-24
down
wechat
bug