当前位置: X-MOL 学术Polym. Eng. Sci. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Effect of Ni2+ chelated to the surface of PBFA on the charring flame retardant and smoke suppression properties of epoxy resin
Polymer Engineering and Science ( IF 3.2 ) Pub Date : 2020-08-12 , DOI: 10.1002/pen.25492
Kailun Zhang 1 , Hongjuan Wu 2 , Ruifang Wu 3 , Guang Yang 1 , Tian Wang 1 , Jixing Xie 1 , Hongqiang Qu 1
Affiliation  

Here, a phosphazene‐based flame retardant (PBFA) containing active amine groups was synthesized by hexachlorocyclotriphosphazene and N‐aminoethylpiperazine and nickel ion (Ni2+) was chelated to the surface of PBFA (named as PBFA‐Ni2+). Incorporation into epoxy resin (EP) with a loading of 6 wt% (named as EP/PBFA‐Ni2+‐6.0), enabled the composite to pass the vertical burning test (UL‐94) V 0 rating. Peak heat release rate and the total smoke release of EP/PBFA‐Ni2+‐6.0 were decreased by 41.02% and 22.74% as measured by cone calorimeter tests. The production rate of CO was inhibited when PBFA‐Ni2+ was incorporated into EP.

中文翻译:

PBFA表面螯合Ni2 +对环氧树脂炭化阻燃和抑烟性能的影响

在此,通过六氯环三磷腈和N-氨基乙基哌嗪合成了含活性胺基的磷腈基阻燃剂(PBFA),并将镍离子(Ni 2+)螯合到PBFA的表面(命名为PBFA-Ni 2+)。掺入6 wt%的环氧树脂(EP)(命名为EP / PBFA-Ni 2+ -6.0),可使复合材料通过垂直燃烧测试(UL-94)V 0等级。通过锥形量热仪测试,EP / PBFA-Ni 2 + -6.0的峰值放热率和总烟雾释放量分别降低了41.02%和22.74%。当将PBFA-Ni 2+掺入EP中时,CO的生产率受到抑制。
更新日期:2020-10-17
down
wechat
bug