当前位置: X-MOL 学术Metall. Mater. Trans. B. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Mechanism of NOx Formation from Nitrogen in the Combustion of the Coals Used in Sintering Process
Metallurgical and Materials Transactions B ( IF 2.4 ) Pub Date : 2020-08-10 , DOI: 10.1007/s11663-020-01923-8
Leonardo Tomas da Rocha , Hyojung Kim , Changmin Lee , Sung-Mo Jung

The released NOx during fuel combustion is one of the major air pollutants, directly related to acid rain and photochemical smog. At present, there is not an economical and effective method of inhibiting NOx emission from sintering flue gas. Therefore, controlling the conditions of fuel combustion is extremely required for the reduction in NOx. The current research investigated the effects of different combustion parameters on the formation of NOx for three type of coals. The formation of NOx decreased with increasing temperature and heating rate while it increased when oxygen content in an atmosphere increased. Anthracite coal replacement with coke up to 100 pct promoted a decrease in the formed NOx amount and XNO by 21 and 53 pct, respectively. The addition of CaO and FeO enhanced the conversion of nitrogen to NOx, especially at temperatures below 1273 K (1000 °C). Taking both the oxidation reaction to form NOx and reduction reaction of NOx to form N2 into account, the activation energy (EA) values of anthracite and coke were evaluated to be 2.2 and 3.6 kJ/mol, respectively. The combustion of semi-anthracite coal emitted the largest amount of NOx, but the anthracite coal containing less fuel-N than other coals showed the highest value of XNO, which indicates that nitrogen content in coal is not the major factor affecting the formation of NOx. The change in nitrogen functionality after combustion process might be the reason for the unpredicted results in the XNO. The pyrrolic-N in anthracite coal might be considered to be the major functional form that directly affects the conversion of nitrogen to NO.

中文翻译:

烧结煤燃烧过程中氮生成NOx的机理

燃料燃烧过程中释放的氮氧化物是主要的空气污染物之一,与酸雨和光化学烟雾直接相关。目前,还没有一种经济有效的抑制烧结烟气NOx排放的方法。因此,控制燃料燃烧条件对于减少 NOx 是非常必要的。目前的研究调查了不同燃烧参数对三种煤的 NOx 形成的影响。NOx 的形成随着温度和加热速率的增加而减少,而随着气氛中氧含量的增加而增加。用高达 100% 的焦炭替代无烟煤,分别促使形成的 NOx 量和 XNO 减少了 21% 和 53%。CaO和FeO的加入促进了氮向NOx的转化,特别是在低于 1273 K (1000 °C) 的温度下。考虑到氧化反应形成 NOx 和 NOx 还原反应形成 N2,无烟煤和焦炭的活化能 (EA) 值分别为 2.2 和 3.6 kJ/mol。半无烟煤燃烧时NOx的排放量最大,但燃料-N含量低于其他煤的无烟煤的XNO值最高,说明煤中氮含量不是影响NOx生成的主要因素. 燃烧过程后氮官能度的变化可能是 XNO 中不可预测结果的原因。无烟煤中的吡咯-N可能被认为是直接影响氮向NO转化的主要功能形式。考虑到氧化反应形成 NOx 和 NOx 还原反应形成 N2,无烟煤和焦炭的活化能 (EA) 值分别为 2.2 和 3.6 kJ/mol。半无烟煤燃烧时NOx的排放量最大,但燃料-N含量低于其他煤的无烟煤的XNO值最高,说明煤中氮含量不是影响NOx生成的主要因素. 燃烧过程后氮官能度的变化可能是 XNO 中不可预测结果的原因。无烟煤中的吡咯氮可能被认为是直接影响氮向 NO 转化的主要功能形式。考虑到氧化反应形成 NOx 和 NOx 还原反应形成 N2,无烟煤和焦炭的活化能 (EA) 值分别为 2.2 和 3.6 kJ/mol。半无烟煤燃烧时NOx的排放量最大,但燃料-N含量低于其他煤的无烟煤的XNO值最高,说明煤中氮含量不是影响NOx生成的主要因素. 燃烧过程后氮官能度的变化可能是 XNO 中不可预测结果的原因。无烟煤中的吡咯-N可能被认为是直接影响氮向NO转化的主要功能形式。无烟煤和焦炭的活化能 (EA) 值分别为 2.2 和 3.6 kJ/mol。半无烟煤燃烧时NOx的排放量最大,但燃料-N含量低于其他煤的无烟煤的XNO值最高,说明煤中氮含量不是影响NOx生成的主要因素. 燃烧过程后氮官能度的变化可能是 XNO 中不可预测结果的原因。无烟煤中的吡咯-N可能被认为是直接影响氮向NO转化的主要功能形式。无烟煤和焦炭的活化能 (EA) 值分别为 2.2 和 3.6 kJ/mol。半无烟煤燃烧时NOx的排放量最大,但燃料-N含量低于其他煤的无烟煤的XNO值最高,说明煤中氮含量不是影响NOx生成的主要因素. 燃烧过程后氮官能度的变化可能是 XNO 中不可预测结果的原因。无烟煤中的吡咯-N可能被认为是直接影响氮向NO转化的主要功能形式。但与其他煤相比,燃料-N含量较少的无烟煤表现出最高的XNO值,这表明煤中的氮含量不是影响NOx形成的主要因素。燃烧过程后氮官能度的变化可能是 XNO 中不可预测结果的原因。无烟煤中的吡咯-N可能被认为是直接影响氮向NO转化的主要功能形式。但与其他煤相比,燃料-N含量较少的无烟煤表现出最高的XNO值,这表明煤中的氮含量不是影响NOx形成的主要因素。燃烧过程后氮官能度的变化可能是 XNO 中不可预测结果的原因。无烟煤中的吡咯-N可能被认为是直接影响氮向NO转化的主要功能形式。
更新日期:2020-08-10
down
wechat
bug