当前位置: X-MOL 学术Electr. Power Compon. Syst. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Single Switch DC-DC Boost Converter using Diode-Capacitor Module and Capacitor-Inductor-Capacitor Lift
Electric Power Components and Systems ( IF 1.7 ) Pub Date : 2020-03-15 , DOI: 10.1080/15325008.2020.1793833
Yiyang Li 1 , Swamidoss Sathiakumar 1
Affiliation  

ABSTRACT– This article presents a single switch DC-DC boost converter using diode-capacitor (DC) modules and capacitor-inductor-capacitor (CLC) lifts. This topology can step-up the voltage of battery-input sources and power the DC-voltage bus of practical applications. The output voltage is the superposition of the voltage of capacitors in each module and inductors in each lift. Operational modes in on-off state can largely increase the step-up ratio of the proposed converter. The voltage gain of the circuit has a wide range with only one switch to control the operation of it. In addition, the extended circuit with multi-module and multi-lift is also derived and analyzed in this article to expand the potential application of the proposed topology. The steady-state characteristics of the proposed circuit are presented in detail in this article. Hardware-based circuit employing one module and one lift will be tested using a battery and experimental results can verify the potential value of this design.

中文翻译:

使用二极管-电容器模块和电容器-电感器-电容器提升器的单开关 DC-DC 升压转换器

摘要– 本文介绍了一种使用二极管-电容器 (DC) 模块和电容器-电感器-电容器 (CLC) 提升装置的单开关 DC-DC 升压转换器。这种拓扑结构可以提升电池输入电源的电压,并为实际应用的直流电压总线供电。输出电压是各模块电容和各电梯电感电压的叠加。开关状态下的操作模式可以大大增加所提出的转换器的升压比。该电路的电压增益范围很广,只有一个开关来控制它的工作。此外,本文还推导出和分析了具有多模块和多电梯的扩展电路,以扩展所提出拓扑的潜在应用。本文详细介绍了所提出电路的稳态特性。
更新日期:2020-03-15
down
wechat
bug