当前位置: X-MOL 学术Results Phys. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Design and parametric analysis of a wide-angle polarization-insensitive metamaterial absorber with a star shape resonator for optical wavelength applications
Results in Physics ( IF 5.3 ) Pub Date : 2020-07-29 , DOI: 10.1016/j.rinp.2020.103259
Sultan Mahmud , Sikder Sunbeam Islam , Kamarulzaman Mat , Muhammad E.H. Chowdhury , Hatem Rmili , Mohammad Tariqul Islam

Optical wavelengths considered as the key source of electromagnetic waves from the sun, and metamaterial absorber (MMA) enables various applications for this region like real invisible cloaks, color imaging, magnetic resonance imaging, light trapping, plasmonic sensor, light detector, and thermal imaging applications. Contemplated those applications, a new wide-angle, polarization-insensitive MMA is presented in this study. The absorber was formatted with three layers that consisted of a sandwiched metal-dielectric-metal structure. This formation of metamaterial absorber showed a good impedance match with plasmonic resonance characteristics. The structure was simulated using the FIT and validated with the FEM. A variety of parametric studies were performed with the design to gain best physical dimension. The mechanism of absorption also explained immensely by various significant analysis. The design had average 96.77% absorption from wavelengths of 389.34 nm to 697.19 nm and a near-perfect absorption of 99.99% at a wavelength of 545.73 nm for TEM mode. For an ultra-wide bandwidth of 102 nm, the design exhibited above 99% absorbance. The proposed is wide-angle independent up to 60° for both TE and TM mode, which is useful for solar energy harvesting, solar cell, and solar thermophotovoltaics (STPV). This MMA can be used for an optical sensor or as a light detector. Moreover, this proposed design can be employed in some applications mentioned above.



中文翻译:

具有光波应用的星形谐振器的广角偏振不敏感超材料吸收体的设计和参数分析

光学波长被认为是来自太阳的电磁波的主要来源,超材料吸收剂(MMA)使得该区域具有各种应用,例如真正的隐形披风,彩色成像,磁共振成像,光阱,等离子体传感器,光检测器和热成像应用程序。考虑到这些应用,本研究提出了一种新型的广角,偏振不敏感的MMA。吸收体的结构为三层,由夹层金属-电介质-金属结构组成。超材料吸收体的这种形成显示出与等离子体共振特性的良好阻抗匹配。使用FIT对结构进行仿真,并通过FEM进行验证。为了获得最佳的物理尺寸,对设计进行了各种参数研究。吸收机理也通过各种重要分析得到了极大的解释。对于TEM模式,该设计在389.34 nm至697.19 nm波长范围内具有平均96.77%的吸收,在545.73 nm波长处具有近99.99%的近乎完美的吸收。对于102 nm的超宽带宽,设计显示出超过99%的吸光度。对于TE和TM模式,建议的角度独立于60°,对于太阳能收集,太阳能电池和太阳热光电(STPV)很有用。该MMA可用于光学传感器或用作光检测器。此外,可以在上述某些应用中采用该提议的设计。TEM模式为73 nm。对于102 nm的超宽带宽,设计显示出超过99%的吸光度。对于TE和TM模式,建议的角度独立于60°,对于太阳能收集,太阳能电池和太阳热光电(STPV)很有用。该MMA可用于光学传感器或用作光检测器。此外,可以在上述某些应用中采用该提议的设计。TEM模式为73 nm。对于102 nm的超宽带宽,设计显示出超过99%的吸光度。对于TE和TM模式,建议的角度独立于60°,对于太阳能收集,太阳能电池和太阳热光电(STPV)很有用。该MMA可用于光学传感器或用作光检测器。此外,可以在上述某些应用中采用该提议的设计。

更新日期:2020-07-29
down
wechat
bug