当前位置: X-MOL 学术Appl. Radiat. Isot. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Design and assembly of an IoT-based device to determine the absorbed dose of gamma and UV radiation.
Applied Radiation and Isotopes ( IF 1.6 ) Pub Date : 2020-07-27 , DOI: 10.1016/j.apradiso.2020.109359
R Baena-Navarro 1 , F Torres-Hoyos 2 , C Uc-Rios 3 , R F Colmenares-Quintero 4
Affiliation  

Ionizing and non-ionizing radiations are part of our daily life, and when organisms are exposed to them for a long time, they may experience their lethal or sublethal effects. For this reason, technologies have been created to quantify them. In this study, Internet of Things (IoT) was used through connecting gamma meters and a low-cost UV radiation device. The validation of this structure was performed with meters calibrated in certified laboratories. The validation results matched those obtained by the other devices, with an error of 2%.



中文翻译:

基于物联网的设备的设计和组装,以确定伽玛和紫外线辐射的吸收剂量。

电离辐射和非电离辐射是我们日常生活的一部分,当有机体长时间暴露在辐射下时,它们可能会遭受致命或亚致死作用。因此,已经创建了量化技术。在这项研究中,通过连接伽马表和低成本的紫外线辐射设备来使用物联网(IoT)。使用在认证实验室中校准过的仪表对这种结构进行验证。验证结果与其他设备获得的结果相符,误差为2%。

更新日期:2020-07-27
down
wechat
bug