Gaseous and Particulate Chlorine Emissions From Typical Iron and Steel Industry in China,Journal of Geophysical Research: Atmospheres

当前位置： X-MOL 学术 › J. Geophys. Res. Atmos. › 论文详情

Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)

Gaseous and Particulate Chlorine Emissions From Typical Iron and Steel Industry in China
Journal of Geophysical Research: Atmospheres ( IF 3.8 ) Pub Date : 2020-07-25 , DOI: 10.1029/2020jd032729
Xiang Ding ₁ , Qing Li _{1,

2} , Di Wu ₁ , Yaoqiang Huo ₁ , Yingguang Liang ₁ , Hongli Wang ₃ , Jie Zhang ₄ , Shuxiao Wang ₅ , Tao Wang ₆ , Xingnan Ye _{1,

2} , Jianmin Chen _{1,

2,

7}

Affiliation

The accurate estimation of chlorine emissions is urgently needed to evaluate regional and global atmospheric chlorination. This study first reports on the gaseous/particulate phases of chlorine emissions from typical integrated steel industries, including the major manufacturing processes (i.e., sintering, ironmaking, and steelmaking) and self‐owned coal‐fired power plant (CFPP). The concentration of chlorine species emitted from the ironmaking/steelmaking processes and the self‐owned CFPP is very low (<1 mg/Nm³). Owing to the combustion of chlorine‐rich sinter raw materials, the sintering processes emitted unexpectedly high concentrations of chlorinated substances, including chlorinated very short‐lived CH₃Cl, CH₂Cl₂, C₂H₅Cl, and C₂H₄Cl₂. Flue gas desulfurization (FGD) systems equipped on the sintering processes can slightly reduce chlorinated hydrocarbons emissions (Cl_VOCs). However, the chlorine species bonded in filterable/condensable particulate states (Cl_FPM/Cl_CPM) can be removed by high efficient systems (with efficiencies of 64.8–94.1% for Cl_FPM and 97.3–98.5% for Cl_CPM), relying on employed FGD technology. Owing to rapid rate at which FGD systems have been installed in China, Cl_{Inorganic gases}, Cl_CPM, and Cl_FPM emissions from the sintering and iron industry in 2016 were reduced by 75.3%, 82.7%, and 45.6%, respectively. Our results indicate that the current ultralow‐emission equipment facilitates the reduction in chlorine emissions from iron and steel industry, but subsequent retrofits should give greater consideration to the simultaneous removal of Cl_VOCs.

更新日期：2020-08-08

点击分享查看原文

点击收藏

阅读更多本刊最新论文