当前位置: X-MOL 学术Int. J. Electron. Commun. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Design of a SAW-less, noise-canceling receiver using an LPTV analysis of a general system with an arbitrary number of N-path filters
AEU - International Journal of Electronics and Communications ( IF 3.0 ) Pub Date : 2020-07-25 , DOI: 10.1016/j.aeue.2020.153373
Vahid Moradino , Esmaeil Najafi Aghdam

This paper, first, presents a Linear Periodically Time-Variant (LPTV) analysis of a general system with an arbitrary number of n-path filters, that the results of mathematical derivations are verified through simulation. Then, a noise-canceling receiver is presented with 3 stages of the 8-path filter. In the structure of this receiver, two filters are used for noise-canceling, and the third filter is used as a Miller bandpass filter to increases the selectivity. The proposed circuit is designed with 65 nm RF CMOS technology and the simulation results show > 44 dB gain, 3–4.5 dB NF, and 0 dBm out-of-band IIP3 at the 50 MHz offset, while in 0.3–3 GHz functional frequency, consuming just 15.52mW of power.



中文翻译:

使用具有任意数量的N路径滤波器的一般系统的LPTV分析设计无SAW,降噪接收机

本文首先介绍了具有任意数量的n路径滤波器的一般系统的线性周期性时变(LPTV)分析,并通过仿真验证了数学推导的结果。然后,给出了具有3级8路径滤波器的降噪接收机。在此接收器的结构中,两个滤波器用于消除噪声,第三个滤波器用作Miller带通滤波器以提高选择性。拟议的电路采用65 nm RF CMOS技术进行设计,仿真结果表明,在50 MHz偏移下,功能频率为0.3–3 GHz时,增益> 44 dB,3–4.5 dB NF和0 dBm带外IIP3 ,仅消耗15.52mW的功率。

更新日期:2020-07-25
down
wechat
bug