当前位置: X-MOL 学术Polym. Plast. Technol. Mater. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Graphite-Filled Polyethylene/Epoxy Blend for High-Conductivity Applications: The Immiscibility Edge
Polymer-Plastics Technology and Materials ( IF 2.7 ) Pub Date : 2020-07-14 , DOI: 10.1080/25740881.2020.1793195
Oluwaseun Ayotunde Alo 1, 2 , Iyiola Olatunji Otunniyi 3
Affiliation  

Polyethylene (PE)/epoxy blends filled with graphite were prepared and studied in this work. The in-plane and through-plane conductivities of the composites increased from 11.68 Scm−1 to 73.11 Scm−1 and 0.20 Scm−1 to 4.12 Scm−1, respectively, as graphite content increased from 30 to 80 wt%. Phase bonding effect of the compatibilizer and reinforcing effect of the filler enhanced the flexural modulus and strength of the composites up to 70 wt% filler content. The electrical conductivities attained by these composites being significantly higher than comparable composite formulations in literature show the edge of immiscible PE/epoxy blend for achieving high-conductivity polymer composites.



中文翻译:

用于高电导率应用的石墨填充聚乙烯/环氧共混物:不混溶性优势

制备并研究了填充有石墨的聚乙烯(PE)/环氧共混物。面内和贯通面电导率的复合材料从11.68增加SCM -1至73.11 SCM -1和0.20 SCM -1至4.12 SCM -1分别作为石墨含量从30增加至80重量%。相容剂的相结合作用和填料的增强作用提高了复合材料的挠曲模量和强度,最高可达70 wt%的填料含量。这些复合材料获得的电导率显着高于文献中的可比复合材料配方,显示出不混溶的PE /环氧共混物的优势,可实现高电导率的聚合物复合材料。

更新日期:2020-07-24
down
wechat
bug