当前位置: X-MOL 学术Mech. Adv. Mater. Struct. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Elastic constitutive model and compression experiment based on microporous silica composites
Mechanics of Advanced Materials and Structures ( IF 3.6 ) Pub Date : 2020-07-07 , DOI: 10.1080/15376494.2020.1780353
Ning Li 1 , Hong Xu 1 , Liguang Hu 1 , Xiao Wang 1 , Lirong Lu 1
Affiliation  

Abstract

Based on the modified reinforced rubber and the hypothetical porosity of the material, the compression properties of elastic rubber with different densities were studied. The experimental results show that the elastic deformation ability within a certain range of the density of the modified rubber, and the rigidity increases with the density enhancement. At the same time, the relationship between the rubber external compression force and the deformation variable is obtained by the elastic deformation characteristic, which is beneficial to the effective control of the elastic deformation of the elastic abrasive tool when used.



中文翻译:

基于微孔二氧化硅复合材料的弹性本构模型及压缩实验

摘要

基于改性增强橡胶和材料的假设孔隙率,研究了不同密度弹性橡胶的压缩性能。实验结果表明,改性橡胶在一定密度范围内弹性变形能力强,刚度随着密度的增加而增加。同时,通过弹性变形特性得到橡胶外压缩力与变形变量的关系,有利于弹性磨具在使用时的弹性变形的有效控制。

更新日期:2020-07-07
down
wechat
bug