当前位置: X-MOL 学术Radiochim. Acta › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Enhancing the physico-mechanical properties of irradiated rubber/waste plastic blend via incorporation of different fillers for industrial applications
Radiochimica Acta ( IF 1.4 ) Pub Date : 2020-07-28 , DOI: 10.1515/ract-2019-3112
Maysa A. Mohamed 1 , Mai. M. EL-Zayat 1 , Nawal A. Shaltout 1 , Ahmed. A. EL-Miligy 1
Affiliation  

Abstract The effect of gamma radiation on the physico-mechanical properties of ethylene propylene diene monomer rubber/styrene butadiene rubber/waste high density polyethylene blend EPDM/SBR/wHDPE (50/50/30) blend reinforced with different types of fillers 10 phr (part per 100 part of rubber, by weight) of HAF-carbon black, Hisil, and prepared modified organo-montmorillonite (OMMT) clay was investigated. The results obtained showed that the organo-montmorillonite (OMMT) clay is the most effective filler for enhancing the physico-mechanical properties of EPDM/SBR/wHDPE vulcanized composites. Scanning electron microscopy and thermogravimetric analysis characteristics were also, studied.

中文翻译:

通过在工业应用中加入不同的填料来提高辐照橡胶/废塑料共混物的物理机械性能

摘要 γ辐射对不同类型填料增强的三元乙丙橡胶/丁苯橡胶/废弃高密度聚乙烯共混物EPDM/SBR/wHDPE (50/50/30)共混物物理机械性能的影响10 phr (研究了 HAF-炭黑、Hisil 和制备的改性有机蒙脱石 (OMMT) 粘土(按重量计每 100 份橡胶的份数)。所得结果表明,有机蒙脱土 (OMMT) 粘土是提高 EPDM/SBR/wHDPE 硫化复合材料物理机械性能的最有效填料。还研究了扫描电子显微镜和热重分析特性。
更新日期:2020-07-28
down
wechat
bug