当前位置: X-MOL 学术Int. J. Clothing Sci. Technol. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Thermal comfort properties of weft knitted quilted fabrics
International Journal of Clothing Science and Technology ( IF 1.0 ) Pub Date : 2020-05-04 , DOI: 10.1108/ijcst-07-2019-0111
Sadaf Aftab Abbasi , Arzu Marmaralı , Gözde Ertekin

This paper investigates the thermal comfort properties of quilted (jersey cord) fabrics produced with different width of diamond pattern, different filling yarn linear density and different types of material.,A total of 12 fabrics were knitted by varying the width of diamond pattern (1 and 3 cm), the filling yarn linear density (300 and 900 denier) and the type of materials (cotton, polyester and their combination). In this regard, air permeability, thermal conductivity, thermal resistance, thermal absorptivity and relative water vapor permeability of these fabrics were measured and evaluated statistically.,The results showed that fabrics knitted using cotton yarn in both front and back surfaces exhibit higher thermal conductivity, thermal absorptivity and relative water vapor permeability characteristics; whereas samples knitted using polyester yarn in both surfaces have higher air permeability and thermal resistance. As the linear density of filling yarn increases, thickness and thermal resistance of the samples increase and air permeability, thermal conductivity, water vapor permeability characteristics decrease. When the effect of the width of diamond pattern compared, it is seen that an increase in the width of pattern lead to an increase in thickness and thermal resistance and a decrease in thermal conductivity, thermal absorptivity and water vapor permeability values.,Many researches were carried out on the thermal comfort properties of knitted fabrics, however there is a lack of research efforts regarding thermal comfort properties of quilted fabrics.

中文翻译:

纬编绗缝织物的热舒适性能

本文研究了不同菱形花纹宽度、不同纬纱线密度和不同类型材料生产的绗缝(针织物)织物的热舒适性能。通过改变菱形花纹的宽度编织了总共12种织物(1和 3 厘米)、纬纱线密度(300 和 900 旦尼尔)和材料类型(棉、涤纶及其组合)。对此,对这些织物的透气性、导热性、热阻、吸热性和相对水蒸气渗透率进行了测量和统计评估。 结果表明,前后表面均使用棉纱针织的织物具有更高的导热性,热吸收率和相对水蒸气渗透率特性;而双面使用涤纶纱针织的样品具有更高的透气性和耐热性。随着纬纱线密度的增加,样品的厚度和热阻增加,透气性、导热性、透湿性特性降低。对比菱形花纹宽度的影响,可以看出,花纹宽度的增加导致厚度和热阻的增加以及导热系数、热吸收率和水蒸气渗透率值的降低。,许多研究针织物的热舒适性进行了研究,但缺乏对绗缝织物热舒适性的研究。随着纬纱线密度的增加,样品的厚度和热阻增加,透气性、导热性、透湿性特性降低。对比菱形花纹宽度的影响,可以看出,花纹宽度的增加导致厚度和热阻的增加以及导热系数、热吸收率和水蒸气渗透率值的降低。,许多研究针织物的热舒适性进行了研究,但缺乏对绗缝织物热舒适性的研究。随着纬纱线密度的增加,样品的厚度和热阻增加,透气性、导热性、透湿性特性降低。对比菱形花纹宽度的影响,可以看出,花纹宽度的增加导致厚度和热阻的增加以及导热系数、热吸收率和水蒸气渗透率值的降低。,许多研究针织物的热舒适性进行了研究,但缺乏对绗缝织物热舒适性的研究。
更新日期:2020-05-04
down
wechat
bug