当前位置: X-MOL 学术Glob. Biogeochem. Cycles › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
A Global Model for Iodine Speciation in the Upper Ocean
Global Biogeochemical Cycles ( IF 5.4 ) Pub Date : 2020-09-01 , DOI: 10.1029/2019gb006467
Martin R. Wadley 1 , David P. Stevens 1 , Tim D. Jickells 2 , Claire Hughes 3 , Rosie Chance 4 , Helmke Hepach 5 , Liselotte Tinel 4 , Lucy J. Carpenter 4
Affiliation  

An ocean iodine cycling model is presented, which predicts upper ocean iodine speciation. The model comprises a three-layer advective and diffusive ocean circulation model of the upper ocean, and an iodine cycling model embedded within this circulation. The two primary reservoirs of iodine are represented, iodide and iodate. Iodate is reduced to iodide in the mixed layer in association with primary production, linked by an iodine to carbon (I:C) ratio. A satisfactory model fit with observations cannot be obtained with a globally constant I:C ratio, and the best fit is obtained when the I:C ratio is dependent on sea surface temperature, increasing at low temperatures. Comparisons with observed iodide distributions show that the best model fit is obtained when oxidation of iodide back to iodate is associated with mixed layer nitrification. Sensitivity tests, where model parameters and processes are perturbed, reveal that primary productivity, mixed layer depth, oxidation, advection, surface fresh water flux and the I:C ratio all have a role in determining surface iodide concentrations, and the timescale of iodide in the mixed layer is sufficiently long for non-local processes to be important. Comparisons of the modelled iodide surface field with parameterisations by other authors shows good agreement in regions where observations exist, but significant differences in regions without observations. This raises the question of whether the existing parameterisations are capturing the full range of processes involved in determining surface iodide, and shows the urgent need for observations in regions where there are currently none.

中文翻译:

海洋上层碘形态的全球模型

提出了一个海洋碘循环模型,该模型可以预测上层海洋碘的形态。该模型包括上层海洋的三层平流和扩散海洋环流模型,以及嵌入该环流中的碘循环模型。代表了碘的两个主要储存库,碘化物和碘酸盐。碘酸盐在与初级生产相关的混合层中被还原为碘化物,通过碘与碳 (I:C) 的比率相关联。使用全局恒定的 I:C 比率无法获得与观测值的令人满意的模型拟合,并且当 I:C 比率取决于海面温度并在低温下增加时,可以获得最佳拟合。与观察到的碘化物分布的比较表明,当碘​​化物氧化回碘酸盐与混合层硝化有关时,获得了最佳模型拟合。模型参数和过程受到干扰的敏感性测试表明,初级生产力、混合层深度、氧化、平流、地表淡水通量和 I:C 比都在确定地表碘化物浓度和碘化物的时间尺度方面发挥作用。混合层足够长,非局部过程很重要。模拟碘化物表面场与其他作者的参数化的比较表明,在存在观测的区域中具有良好的一致性,但在没有观测的区域中存在显着差异。这就提出了一个问题,即现有的参数化是否涵盖了确定表面碘化物所涉及的全部过程,并表明迫切需要在目前没有的地区进行观测。在模型参数和过程受到扰动的情况下,揭示初级生产力、混合层深度、氧化、平流、地表淡水通量和 I:C 比率都在确定表面碘化物浓度和混合层中碘化物的时间尺度中起作用足够长的非本地进程是重要的。模拟碘化物表面场与其他作者的参数化的比较表明,在存在观测的区域中具有良好的一致性,但在没有观测的区域中存在显着差异。这就提出了一个问题,即现有的参数化是否涵盖了确定表面碘化物所涉及的全部过程,并表明迫切需要在目前没有的地区进行观测。在模型参数和过程受到扰动的情况下,揭示初级生产力、混合层深度、氧化、平流、地表淡水通量和 I:C 比率都在确定表面碘化物浓度和混合层中碘化物的时间尺度中起作用足够长的非本地进程是重要的。模拟碘化物表面场与其他作者的参数化的比较表明,在存在观测的区域中具有良好的一致性,但在没有观测的区域中存在显着差异。这就提出了一个问题,即现有的参数化是否涵盖了确定表面碘化物所涉及的全部过程,并表明迫切需要在目前没有的地区进行观测。对流、地表淡水通量和 I:C 比率都在确定地表碘化物浓度方面起作用,并且混合层中碘化物的时间尺度足够长,因此非局地过程很重要。模拟碘化物表面场与其他作者的参数化的比较表明,在存在观测的区域中具有良好的一致性,但在没有观测的区域中存在显着差异。这就提出了一个问题,即现有的参数化是否涵盖了确定表面碘化物所涉及的全部过程,并表明迫切需要在目前没有的地区进行观测。对流、地表淡水通量和 I:C 比率都在确定地表碘化物浓度方面起作用,并且混合层中碘化物的时间尺度足够长,因此非局地过程很重要。模拟碘化物表面场与其他作者的参数化的比较表明,在存在观测的区域中具有良好的一致性,但在没有观测的区域中存在显着差异。这就提出了一个问题,即现有的参数化是否涵盖了确定表面碘化物所涉及的全部过程,并表明迫切需要在目前没有的地区进行观测。混合层中碘化物的时间尺度足够长,因此非局部过程很重要。模拟碘化物表面场与其他作者的参数化的比较表明,在存在观测的区域中具有良好的一致性,但在没有观测的区域中存在显着差异。这就提出了一个问题,即现有的参数化是否涵盖了确定表面碘化物所涉及的全部过程,并表明迫切需要在目前没有的地区进行观测。混合层中碘化物的时间尺度足够长,因此非局部过程很重要。模拟的碘化物表面场与其他作者的参数化的比较在存在观察的区域显示出良好的一致性,但在没有观察的区域中存在显着差异。这就提出了一个问题,即现有的参数化是否涵盖了确定表面碘化物所涉及的全部过程,并表明迫切需要在目前没有的地区进行观测。
更新日期:2020-09-01
down
wechat
bug