当前位置: X-MOL 学术Int. J. Commun. Syst. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
A compact skull‐shaped defected ground super wideband microstrip monopole antenna for short‐distance wireless communication
International Journal of Communication Systems ( IF 1.7 ) Pub Date : 2020-07-02 , DOI: 10.1002/dac.4527
MD Atiqur Rahman 1 , Mandeep Singh Jit Singh 1 , MD Samsuzzaman 2 , Mohammad Tariqul Islam 1
Affiliation  

In this paper, a human skull‐shaped miniaturized super wideband microstrip monopole antenna is presented. The shape of the microstrip radiator is optimized and designed by combining different sizes of semicircular‐ and rectangular‐shaped radiating elements along with a microstrip feed line. On the other hand, a defected ground structure as the ground is placed at the opposite side of the radiator, which is fabricated on Rogers 5880 substrate. The electrical length of the proposed antenna is 0.240 × 0.200 × 0.016 λ at 3 GHz. The CST microwave studio is used for all the required simulations regarding antenna prototype design and optimization. The complete outcomes demonstrate that the proposed miniaturized antenna has a bandwidth of 24.5 GHz (3 to 27.5 GHz) having a radiation pattern in the form of nearly omnidirectional. The measured fractional bandwidth of the antenna is 160.66%, and the bandwidth dimension ratio is 3346.99, which is the highest among the literature review. The maximum calculated gain and efficiency are 6.3 dBi and 93%, respectively. For the time domain analysis, the antenna shows a decent performance in terms of the system group delay and fidelity factor. The numerical and experimental data are investigated throughout the study, which represents that the proposed antenna is suitable for short‐distance wireless communication like wireless local area network/Wi‐Fi/Worldwide Interoperability for Microwave Access (WiMAX)/ultra‐wideband and some other applications.

中文翻译:

紧凑型头骨形缺陷地面超宽带微带单极天线,用于短距离无线通信

本文提出了一种人类头骨形的微型超宽带微带单极天线。通过结合不同尺寸的半圆形和矩形辐射元件以及微带馈线,优化和设计微带辐射器的形状。另一方面,将有缺陷的地面结构作为地面放置在散热器的相对侧,该散热器是在Rogers 5880基板上制造的。建议的天线在3 GHz时的电气长度为0.240×0.200×0.016λ。CST微波工作室用于有关天线原型设计和优化的所有必需模拟。完整的结果表明,所提出的小型化天线具有24.5 GHz(3至27.5 GHz)的带宽,其辐射方向图几乎是全向的。测得的天线分数带宽为160.66%,带宽尺寸比为3346.99,是文献综述中最高的。计算出的最大增益和效率分别为6.3 dBi和93%。对于时域分析,天线在系统组延迟和保真度方面表现出不错的性能。在整个研究过程中都对数值和实验数据进行了研究,这表明所建议的天线适用于短距离无线通信,例如无线局域网/ Wi-Fi /微波访问全球互通性(WiMAX)/超宽带等。应用程序。3 dBi和93%。对于时域分析,天线在系统组延迟和保真度方面表现出不错的性能。在整个研究过程中都对数值和实验数据进行了研究,这表明所建议的天线适用于短距离无线通信,例如无线局域网/ Wi-Fi /微波访问全球互通性(WiMAX)/超宽带等。应用程序。3 dBi和93%。对于时域分析,天线在系统组延迟和保真度方面表现出不错的性能。在整个研究过程中都对数值和实验数据进行了研究,这表明所建议的天线适用于短距离无线通信,例如无线局域网/ Wi-Fi /微波访问全球互通性(WiMAX)/超宽带等。应用程序。
更新日期:2020-07-02
down
wechat
bug