当前位置：
X-MOL 学术
›
Mater. Des.
›
论文详情
Our official English website, www.x-mol.net, welcomes your
feedback! (Note: you will need to create a separate account there.)
Effect of initial powder particle size on the hot workability of powder metallurgy Ni-based superalloys
Materials & Design ( IF 7.6 ) Pub Date : 2020-09-01 , DOI: 10.1016/j.matdes.2020.108926 Masaya Higashi , Naoya Kanno
Materials & Design ( IF 7.6 ) Pub Date : 2020-09-01 , DOI: 10.1016/j.matdes.2020.108926 Masaya Higashi , Naoya Kanno
|
Abstract The effect of the initial powder particle size on the hot workability of Ni-based superalloys was investigated. Herein, four powders with different particle size ranges ( 106 μm) exhibited superior hot workability than that of the sample fabricated using the powder with finer particles (
中文翻译：
初始粉末粒径对粉末冶金镍基高温合金热加工性的影响
摘要 研究了初始粉末粒径对镍基高温合金热加工性的影响。在此，具有不同粒径范围（106 μm）的四种粉末比使用具有更细颗粒的粉末制造的样品表现出优异的热加工性（
更新日期：2020-09-01
中文翻译：
初始粉末粒径对粉末冶金镍基高温合金热加工性的影响
摘要 研究了初始粉末粒径对镍基高温合金热加工性的影响。在此，具有不同粒径范围（106 μm）的四种粉末比使用具有更细颗粒的粉末制造的样品表现出优异的热加工性（
京公网安备 11010802027423号