The combination of textiles and three-dimensional printing offers a wide range of research and application areas, but only publications in combination with fused deposition modeling processes can be found so far. In this article the possibility of printing resin directly on textiles in the stereolithography process is presented. A broad spectrum of textiles and surfaces is examined to clearly present the feasibility. It was found that printing directly on most textiles can be performed without major difficulties, while problems were only observed on smooth surfaces and coatings on textiles.

中文翻译：

---

使用立体光刻技术在不同纺织品基材上的三维印刷树脂：概念验证

纺织品和 3D 打印的结合提供了广泛的研究和应用领域，但目前只能找到结合熔融沉积建模工艺的出版物。本文介绍了在立体光刻工艺中直接在纺织品上印刷树脂的可能性。检查了广泛的纺织品和表面，以清楚地展示可行性。结果表明，直接在大多数纺织品上进行印花可以没有大的困难，而仅在纺织品的光滑表面和涂层上观察到问题。