当前位置: X-MOL 学术Int. J. Commun. Syst. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
A compact four‐element MIMO antenna for WLAN/WiMAX/satellite applications
International Journal of Communication Systems ( IF 1.7 ) Pub Date : 2020-06-28 , DOI: 10.1002/dac.4506
A.W. Mohammad Saadh 1 , Shashank Khangarot 2 , B.V. Sravan 3 , Namratha Aluru 3 , Poonkuzhali Ramaswamy 1 , Tanweer Ali 4 , Manohara M.M. Pai 5
Affiliation  

This paper presents a four‐element wideband monopole MIMO antenna. Initially, a single‐element wideband CPW‐fed antenna is designed operating in the range of 4.30 to 6.45 GHz. Using this design, an approach towards MIMO structure is studied. A two‐element structure is designed keeping them adjacent to each other, and the isolation between the antennas is observed. After which, a four‐element structure is designed having the best orientation in order to achieve good isolation between the antenna elements. The proposed antenna configuration has four identical CPW‐fed elements. The proposed configuration has a fractional bandwidth of 40.27% and has a simulated peak gain of 5.5 dBi. This antenna is intended to be used for WLAN, WiMAX, and satellite bands of range corresponding to 4.70–6.19, 5.5–5.7, and 5–6 GHz. All the necessary antenna simulations are simulated using Ansys HFSS and verified on NI AWR Design Environment. The fabricated model of the proposed design is measured for its performance parameters and validated.

中文翻译:

紧凑的四元素MIMO天线,用于WLAN / WiMAX /卫星应用

本文提出了一种四元素宽带单极MIMO天线。最初,单元素宽带CPW馈电天线的设计工作频率为4.30至6.45 GHz。使用该设计,研究了一种针对MIMO结构的方法。设计了两个元素的结构,使它们彼此相邻,并且观察到天线之间的隔离。之后,设计具有最佳方向的四元件结构,以实现天线元件之间的良好隔离。建议的天线配置具有四个相同的CPW馈电元件。提出的配置具有40.27%的分数带宽,并且具有5.5 dBi的模拟峰值增益。该天线旨在用于WLAN,WiMAX和对应于4.70–6.19、5.5–5.7和5–6 GHz范围的卫星频带。所有必要的天线仿真均使用Ansys HFSS进行仿真,并在NI AWR设计环境中进行了验证。测量所提出设计的制造模型的性能参数并进行验证。
更新日期:2020-06-28
down
wechat
bug