This paper presents a method to select a fit size from the data sizing system by using fuzzy technique. First, we coding size from data in the sizing system with the numerical order to use looking for sizes. Second, choosing primary dimensions from the sizing table which is coded. Then, the fuzzy technique is used to choose the fit size of human which is based on the real data in the table and any the body’s dimension in the edge conditions. And finally, the simulation results are introduced. The sizing system table in this research has 24 sizes and 3 kinds of different inseam length measurements for three human shapes have different height, such as regular, short and tall. The principal component analysis method and look at directly size sign in the table are used to have primary dimensions. There are variables to input the fuzzy logic model. We apply fuzzy logic for selection size of human by the Sugeno model and using the If–Then rule. The result of the research is the simulation program for selection of the size with the Matlab software. Selecting the fit size with the traditional method will be taken a lot of time and shows the result is not clearly. This study is tested by two ways from input any the body’s measurements and measurements from the sizing system into the simulation program. Extracting sizes are very useful in the manufacture of garments and business clothing by online, face to face. It will reduce the time to choose the size for fitting body measurements.

本文提出了一种利用模糊技术从数据大小调整系统中选择合适尺寸的方法。首先，我们使用大小顺序从大小调整系统中的数据编码大小以使用寻找大小。其次，从已编码的尺寸表中选择主要尺寸。然后，基于表中的真实数据以及边缘条件下人体的任意尺寸，使用模糊技术来选择人体的合适尺寸。最后介绍了仿真结果。本研究中的上浆系统表具有24种尺寸和3种不同的下se长测量值，用于三种具有不同身高（例如规则，短和高）的人体形状。主成分分析方法和直接查看表中的尺寸符号用于确定主要尺寸。有变量输入模糊逻辑模型。我们通过Sugeno模型并使用If–Then规则对人的选择大小应用模糊逻辑。研究的结果是使用Matlab软件选择尺寸的仿真程序。用传统方法选择合适的尺码会花费很多时间，并且显示的结果不清楚。这项研究通过两种方式进行测试，即将人体的任何测量结果和尺寸测量系统的测量结果输入模拟程序中。在网上和面对面生产服装和商务服装时，提取尺寸非常有用。它将减少选择适合人体测量的尺寸的时间。用传统方法选择合适的尺码会花费很多时间，并且显示的结果不清楚。这项研究通过两种方式进行测试，即将人体的任何测量结果和尺寸测量系统的测量结果输入模拟程序中。在网上和面对面生产服装和商务服装时，提取尺寸非常有用。它将减少选择适合人体测量的尺寸的时间。用传统方法选择合适的尺码会花费很多时间，并且显示的结果不清楚。这项研究通过两种方式进行测试，即将人体的任何测量结果和尺寸测量系统的测量结果输入模拟程序中。在网上和面对面生产服装和商务服装时，提取尺寸非常有用。它将减少选择适合人体测量的尺寸的时间。