当前位置: X-MOL 学术Fibers Polym. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
The Moisture Management and Drying Properties of Weft Knitted Plating Fabrics
Fibers and Polymers ( IF 2.2 ) Pub Date : 2020-06-23 , DOI: 10.1007/s12221-020-1117-9
Qing Chen , Dahua Shou , Rong Zheng , Jintu Fan , Xianfu Wan , Bailu Fu , Pibo Ma

The six types of weft knitted fabric in plating structure were made by cotton, polypropylene and polyester with different number of filaments. The fabrics were tested by moisture management tester, vertical wicking and drying test. It was found that the large water absorption difference and the large filament density difference between the inner and outer side of fabric could result in the better water absorption and drying ability. The fabric with polypropylene yarn (75D/48f) at inner side and cotton yarn (40 Ne) at outer side had best moisture management property evaluated by MMT. While the fabric with polypropylene yarn (75D/48f) at the inner side and polyester yarn (75D/144f) at the outer side had highest vertical wicking and drying rate.



中文翻译:

纬编电镀织物的水分管理和干燥性能

镀层结构的六种纬编针织物是由棉,聚丙烯和涤纶制成的,具有不同的长丝数。织物通过湿度管理测试仪,垂直芯吸和干燥测试进行测试。结果发现,织物内,外层之间较大的吸水率差和较大的长丝密度差可导致较好的吸水率和干燥能力。内侧为聚丙烯纱线(75D / 48f),外侧为棉纱(40 Ne)的织物具有最佳的水分管理性能(通过MMT评估)。内侧为聚丙烯纱线(75D / 48f),外侧为聚酯纱线(75D / 144f)的织物的垂直芯吸和干燥速度最高。

更新日期:2020-06-23
down
wechat
bug