当前位置:
X-MOL 学术
›
Surf. Eng.
›
论文详情
Our official English website, www.x-mol.net, welcomes your
feedback! (Note: you will need to create a separate account there.)
Characterization of boronized layers on Vanadis 6 tool steel
Surface Engineering ( IF 2.4 ) Pub Date : 2020-06-21 , DOI: 10.1080/02670844.2020.1781377 Mourad Keddam 1 , Mária Hudáková 2 , Jana Ptačinová 2 , Roman Moravčík 2 , Peter Gogola 2 , Zuzana Gabalcová 2 , Peter Jurči 2
Surface Engineering ( IF 2.4 ) Pub Date : 2020-06-21 , DOI: 10.1080/02670844.2020.1781377 Mourad Keddam 1 , Mária Hudáková 2 , Jana Ptačinová 2 , Roman Moravčík 2 , Peter Gogola 2 , Zuzana Gabalcová 2 , Peter Jurči 2
Affiliation
Vanadis 6 steel was boronized at temperatures from 950°C to 1050°C for durations from 0.75–10 h. The treatments produced layers with thickness from 4 to 133 μm, depending on the processing paramete...
中文翻译:
Vanadis 6 工具钢上硼化层的表征
Vanadis 6 钢在 950°C 至 1050°C 的温度下进行硼化处理,持续时间为 0.75-10 小时。处理产生的层厚度从 4 到 133 微米不等,具体取决于加工参数...
更新日期:2020-06-21
中文翻译:
Vanadis 6 工具钢上硼化层的表征
Vanadis 6 钢在 950°C 至 1050°C 的温度下进行硼化处理,持续时间为 0.75-10 小时。处理产生的层厚度从 4 到 133 微米不等,具体取决于加工参数...