The dendrite morphologies of the cast nickel-based superalloy CMSX-4® (CMSX-4® is registered trademarks of the Cannon-Muskegon Corporation) and the austenitic stainless steel HP microalloy have been obtained via an automated serial-sectioning process which allows three-dimensional (3D) microstructural characterization. The dendrite arm spacing, volume fraction of segregation, and fraction of porosity have been determined. This technique not only increases the depth, scope, and level of detailed microstructural characterization but also delivers microstructural data for modeling and simulation.

中文翻译：

---

使用Robo-Met.3D通过自动连续切片对树突进行三维分析

铸造镍基高温合金CMSX- 4®（CMSX- 4®是Cannon-Muskegon Corporation的注册商标）和奥氏体不锈钢HP微合金的枝晶形态是通过自动连续切片工艺获得的，该工艺允许三级（3D）微观结构表征。确定了枝晶臂间距，偏析的体积分数和孔隙率的分数。该技术不仅增加了详细的微结构表征的深度，范围和水平，而且还提供了用于建模和仿真的微结构数据。