当前位置:
X-MOL 学术
›
Can. J. Chem. Eng.
›
论文详情
Our official English website, www.x-mol.net, welcomes your
feedback! (Note: you will need to create a separate account there.)
Deposition from “Waxy” Mixtures in a Flow‐Loop Apparatus under Turbulent Conditions: Investigating the Effect of Suspended Wax Crystals under Cold Flow Conditions
The Canadian Journal of Chemical Engineering ( IF 1.6 ) Pub Date : 2020-06-10 , DOI: 10.1002/cjce.23786
中文翻译:
在湍流条件下从循环装置中的“蜡质”混合物中沉积:研究在冷流条件下悬浮蜡晶体的影响
更新日期:2020-06-10
The Canadian Journal of Chemical Engineering ( IF 1.6 ) Pub Date : 2020-06-10 , DOI: 10.1002/cjce.23786
In Ehsani et al,[1], an error has been published in Equation (7) and should be corrected as:
(7)
where xi, (TL)i, (Tm)i, and (ΔHm)i are the mole fraction, the predicted liquidus temperature, the melting point temperature, and the enthalpy of melting (or fusion) of component i, respectively. And, a sentence following Equation (7) should have read:
The predicted values of TL for the 0.06 and 0.10 g/g prepared mixtures are 310.4 K (or 37.2°C) and 314.2 K (or 41.1°C), respectively.
We apologize for this error.
中文翻译:
在湍流条件下从循环装置中的“蜡质”混合物中沉积:研究在冷流条件下悬浮蜡晶体的影响
在Ehsani等人[ 1 ]中,一个错误已在等式(7)中发布,应纠正为:
(7)
其中X我,(Ť大号)我,(Ť米)我,和(ΔH米)我是摩尔分数,预测液相线温度,熔点温度,和组分i的熔化(或融合)的焓,分别。并且,在等式(7)之后的句子应为:
0.06和0.10 g / g制备的混合物的T L的预测值分别为310.4 K(或37.2°C)和314.2 K(或41.1°C)。
对于此错误,我们深表歉意。