当前位置: X-MOL 学术J. Atmos. Sol. Terr. Phys. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
On the necessity of using foμEs instead of foEs in estimating the intensity and variability of sporadic E layers
Journal of Atmospheric and Solar-Terrestrial Physics ( IF 1.8 ) Pub Date : 2020-09-01 , DOI: 10.1016/j.jastp.2020.105327
Christos Haldoupis , Haris Haralambous , Chris Meek

Abstract The ordinary wave critical frequency foEs is measured routinely by ionosondes and used widely in estimating the intensity and occurrence of sporadic E (Es) metal ion layers. Recently, however, it was realized that foEs overestimates Es intensities because it corresponds to the sum of both the layer metal ion plasma and the regular E region plasma densities. To account for this, a new parameter, foμEs, was introduced that corresponds to the Es layer metal plasma density only, and a method was proposed for its calculation. In the present work, an ionosonde data set is analyzed to assess the importance of replacing foEs by foμEs in Es studies. To this objective, the diurnal and seasonal variability of sporadic E is re-examined. It turns out that the Es mean diurnal and seasonal variations estimated by means of using foμEs, differ substantially from those based on foEs, implying that the use of foEs leads to biased results and wrong physical inferences. It is therefore urged that foμEs is adopted and used instead of foEs, in future ionosonde sporadic E studies. The same applies for the case of satellite radio occultation (RO) sporadic E investigations as well, where foμEs should be used, instead of foEs, for calibration and validation purposes. All this is equally valid in the case of the blanketing sporadic E frequency fbEs and the corresponding new parameter fbμEs that needs also to be adopted and used.

中文翻译:

使用foμEs代替foEs来估计零星E层的强度和变异性的必要性

摘要 普通波临界频率foEs 是电离探空仪的常规测量方法,广泛用于估计零星E (Es) 金属离子层的强度和发生率。然而,最近人们意识到 foEs 高估了 Es 强度,因为它对应于层金属离子等离子体和规则 E 区等离子体密度的总和。为了解决这个问题,引入了一个新参数 foμEs,该参数仅对应于 Es 层金属等离子体密度,并提出了一种计算方法。在目前的工作中,分析了一个离子探空仪数据集,以评估在 Es 研究中用 foμEs 替换 foEs 的重要性。为此,重新检查了散发 E 的日变化和季节变化。事实证明,Es 表示通过使用 foμEs 估计的日变化和季节变化,与基于 foE 的那些大不相同,这意味着使用 foE 会导致有偏见的结果和错误的物理推断。因此,敦促在未来的离子探空仪零星 E 研究中采用和使用 foμEs 代替 foEs。这同样适用于卫星无线电掩星 (RO) 零星 E 调查的情况,其中应使用 foμEs 而不是 foEs,用于校准和验证目的。所有这些在覆盖零星 E 频率 fbEs 和相应的新参数 fbμEs 的情况下同样有效,也需要采用和使用。这同样适用于卫星无线电掩星 (RO) 零星 E 调查的情况,其中应使用 foμEs 而不是 foEs,用于校准和验证目的。所有这些在覆盖零星 E 频率 fbEs 和相应的新参数 fbμEs 的情况下同样有效,也需要采用和使用。这同样适用于卫星无线电掩星 (RO) 零星 E 调查的情况,其中应使用 foμEs 而不是 foEs,用于校准和验证目的。所有这些在覆盖零星 E 频率 fbEs 和相应的新参数 fbμEs 的情况下同样有效,也需要采用和使用。
更新日期:2020-09-01
down
wechat
bug