Abstract High-pressure jet coolant assistance was used in the cutting process of Inconel 718. The effects of coolant pressure on cutting force and machined surface quality were researched. As well as the experimental design, Two-dimensional cutting models for Inconel 718 were established using AdvantEdge FEM software. Simulations and experiments were carried out based on the Taguchi method. The simulation predictions and experimental test results were compared. The influence of variables on cutting force and machined surface roughness was determined by variance analysis. The effect of cooling pressure on roughness of machined surfaces was studied by simulation and experiment tests.

中文翻译：

---

Inconel 718车削过程中高压冷却对切削力和加工表面质量影响的有限元模拟与实验

摘要 在Inconel 718切削过程中采用了高压射流辅助冷却液，研究了冷却液压力对切削力和加工表面质量的影响。除了实验设计外，还使用 ​​AdvantEdge FEM 软件建立了 Inconel 718 的二维切割模型。模拟和实验是基于田口方法进行的。比较了模拟预测和实验测试结果。通过方差分析确定变量对切削力和加工表面粗糙度的影响。通过模拟和实验测试研究了冷却压力对加工表面粗糙度的影响。