当前位置：
X-MOL 学术
›
BioMed. Eng. OnLine
›
论文详情
Our official English website, www.x-mol.net, welcomes your
feedback! (Note: you will need to create a separate account there.)
Electrochemical modeling and evaluation for textile electrodes to skin.
BioMedical Engineering OnLine ( IF 2.9 ) Pub Date : 2020-05-11 , DOI: 10.1186/s12938-020-00772-5 Jinzhong Song 1, 2 , Yu Zhang 2 , Yijing Yang 2 , Hao Liu 3 , Tianshu Zhou 1 , Kui Zhang 2 , Fan Li 2 , Zhi Xu 2 , Qingjun Liu 1 , Jingsong Li 1, 4
BioMedical Engineering OnLine ( IF 2.9 ) Pub Date : 2020-05-11 , DOI: 10.1186/s12938-020-00772-5 Jinzhong Song 1, 2 , Yu Zhang 2 , Yijing Yang 2 , Hao Liu 3 , Tianshu Zhou 1 , Kui Zhang 2 , Fan Li 2 , Zhi Xu 2 , Qingjun Liu 1 , Jingsong Li 1, 4
Affiliation
BACKGROUND
With the development of wearable health-monitoring technologies, a variety of textile electrodes have been produced and applied by researchers. However, there are no universal and effective methods even testing platforms for evaluating the skin-electrode electrochemical interface for textile electrodes because different human bodies have different skin characteristics.
METHODS
An electrochemical modeling and evaluation for textile electrodes to skin was proposed, and two electrochemical evaluation platforms (EEP) were set up based on two simulated skin models (SSM). First, skin-electrode electrochemical interface (SEEI) models for traditional wet electrodes and textile electrodes were analyzed. Based on the SEEI models and YY/T 0196-2005 (Chinese YY/T pharmaceutical industry standard for disposable ECG electrode), three skin-electrode electrochemical characteristics (SEEC), including skin-electrode static impedance (SESI), skin-electrode alternating current impedance (SEAI), and skin-electrode polarization voltage (SEPV), were proposed. Then, three electrochemical evaluation methods for textile electrodes to skin were proposed and analyzed, which were the correlation between SEEC and skin-electrode contact pressure (SECP), skin-electrode relative movement (SERM), and conduction loss of active signals (CLAS). Finally, an electrochemical evaluation platform was set up based on an active simulated skin model (ASSM) and passive simulated skin model (PSSM).
RESULTS
9 feature parameters based on the passive electrochemical evaluation platform (PEEP) and 11 feature parameters based on the active electrochemical evaluation platform (AEEP) were obtained for evaluating textile electrodes. And four kinds of textile electrode characteristics including SEEC, SECP, SERM, and CLAS were quantitatively measured based on the electrochemical evaluation platform, and the testing accuracy and range for these characteristics were measured separately. Finally, correlation between SEEC and SECP for 10 kinds of textile electrode samples was studied, and 14 electrochemical characteristics and four skin-electrode contact pressure characteristics were extracted. Experimental results showed that significant correlations were found between six SEEC characteristics and SECP characteristics, and the correlation coefficient between ACI_3 and USECP was the highest. And the polarization voltages of most dry electrode samples showed a downward trend with the increase of contact pressure.
CONCLUSIONS
The electrochemical evaluation platform yielded effective experimental data and could provide strong support for the evaluation and application of textile electrodes, which was also effective in evaluating other bioelectric electrodes such as 3M electrode, stainless steel electrode, dry electrode and microneedle electrode.
更新日期：2020-05-11
京公网安备 11010802027423号