当前位置: X-MOL 学术Microsyst. Technol. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Minimal microfabrication required digital microfluidic system toward point-of-care nucleic acid amplification test application for developing countries
Microsystem Technologies ( IF 1.6 ) Pub Date : 2020-01-13 , DOI: 10.1007/s00542-019-04733-4
Thien Hoang , Bao-Han Ly , Thanh-Xuan Le , Thanh-Thao Huynh , Hoang-Tuan Nguyen , Toi Van Vo , Thi Thu Hien Pham , Khon Huynh

Digital Microfluidics (DMF) has potentially been a favorable platform for point-of-care molecular diagnostics. However, its fabrication process normally relies heavily on expensive microfabrication facilities and equipment. In this work, we developed a portable, small footprint DMF device that requires minimal microfabrication work (only a small clean bench and a DIY spin coater were required) but is still capable of performing nucleic acid amplification tests. The DMF system implemented in this work could perform successfully the Loop-mediated isothermal Amplification (LAMP) reaction with samples containing extracted DNA of Plasmodium falciparum that causes Malaria in human. The LAMP reaction was conducted at the optimal temperature of 65 °C in 45 min with the total reaction volume of 1.5 µL. The results of LAMP were designed to be observable to naked eyes via the color change from pink to yellowish orange, which simplifies the readout step and eliminates the necessity for external and bulky result-reading equipment.

更新日期:2020-01-13
down
wechat
bug