Abstract

Industrial-scale experiments were conducted to study the effects of tertiary air declination angle (TDA) on the coal combustion and steam temperature characteristics in the first 350-MW supercritical down-fired boiler in China with the multiple-injection and multiple-staging combustion (MIMSC) technology at medium and high loads. The experimental results indicated that as the TDA increased from 0° to 15°, the overall gas temperature in the lower furnace rose and the symmetry of temperature field was enhanced. The ignition distance of the fuel-rich coal/air flow decreased. In near-burner region, the concentration of O₂ decreased while the concentrations of CO and NO increased. The concentration of NO decreased in near-tertiary-air region. The carbon in fly ash decreased significantly from 8.40% to 6.45% at a load of 260 MW. At a TDA of 15°, the ignition distances were the shortest (2.07 m and 1.73 m) at a load of 210 MW and 260 MW, respectively. The main and reheat steam temperatures were the highest (557.2°C and 559.4°C at a load of 210 MW, 558.4°C and 560.3°C at a load of 260 MW). The carbon in fly ash was the lowest (4.83%) at a load of 210 MW. On changing the TDA from 15° to 25°, the flame kernel was found to move downward and the main and reheat steam temperatures dropped obviously. The change of TDA has little effect on NO_x emissions(660–681 mg/m³ at 6% O₂). In comprehensive consideration of the pulverized coal combustion characteristics and the unit economic performance, an optimal TDA of 15° is recommended.