Abstract TiNiCu0·05Sn was sintered using Spark Plasma Sintering (SPS) and a new derivative processing method, hybrid Flash-SPS (hFSPS). The high heating rate achieved (7700 °C/min) produced almost single-phase samples with high density. The sample sintered at 1040 °C showed a higher power factor and a lower thermal conductivity than the SPS sample, resulting in a higher ZT at 350 °C (0.44 vs 0.35).

中文翻译：

---

热导率降低的 TiNiCu0.05Sn 混合 Flash-SPS

摘要 TiNiCu0·05Sn 采用火花等离子烧结（SPS）和一种新的衍生加工方法——混合闪蒸-SPS（hFSPS）烧结而成。达到的高加热速率 (7700 °C/min) 产生了几乎单相的高密度样品。在 1040 °C 下烧结的样品显示出比 SPS 样品更高的功率因数和更低的热导率，从而导致在 350 °C 时具有更高的 ZT（0.44 对 0.35）。