当前位置: X-MOL 学术ChemCatChem › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Electroless Plating of Transition Metal Boride with High Boron Content as Superior HER Electrocatalyst
ChemCatChem ( IF 3.8 ) Pub Date : 2020-03-30 , DOI: 10.1002/cctc.202000315
Ruiqi Zhang 1 , Huixiang Liu 1 , Chenfeng Wang 2 , Lincai Wang 2 , Yanjing Yang 3 , Yanhui Guo 1
Affiliation  

Facile deposition of transition metal boride (TMB) with high‐boron content as highly efficient hydrogen evolution reaction (HER) electrocatalyst has been realized by a facile one‐step electroless‐plating (EP) method. Boron content of the TMB catalyst shows an appreciable impact on its intrinsic HER activity. NiB/NF electrode with thin amorphous nickel boride (NiB) deposition on nickel foam (NF) required overpotential of only 41.2 mV to deliver a current density of 10 mA cm−2 for HER in 1.0 M KOH alkaline electrolyte. Meanwhile, this kind of electrode also shows satisfied stability which can work at large current density of 1000 mA cm−2 for over 72 h without performance degradation. The advance on the TMB electrode may pave a way to the development of practical electrodes for water splitting.

中文翻译:

高硼含量过渡金属硼化物的化学镀作为高级HER电催化剂

通过简便的一步式化学镀(EP)方法已经实现了高硼含量过渡金属硼化物(TMB)的快速沉积,作为高效的析氢反应(HER)电催化剂。TMB催化剂的硼含量对其固有的HER活性显示出显着的影响。在1.0M KOH碱性电解液中,用于HER的电流密度仅为41.2 mV,以在HER中提供10 mA cm -2的电流密度,而在镍泡沫(NF)上沉积有薄的非晶态硼化镍(NiB)的NiB / NF电极。同时,这种电极还显示出令人满意的稳定性,可以在1000 mA cm -2的大电流密度下工作持续72小时以上,而性能不会下降。TMB电极的进步可能为开发用于水分解的实用电极铺平了道路。
更新日期:2020-03-30
down
wechat
bug