当前位置: X-MOL 学术Adv. Eng. Mater. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Fabrication of Complex 3D Fluidic Networks via Modularized Stereolithography
Advanced Engineering Materials ( IF 3.4 ) Pub Date : 2020-03-19 , DOI: 10.1002/adem.202070012
Terry Ching 1, 2, 3 , Yi-Chin Toh 3, 4, 5, 6 , Michinao Hashimoto 1, 2
Affiliation  

Stereolithography (SL) 3D printer has been used to fabricate microfluidic channels albeit with limitations in the attainable channel geometries. In the article, number 1901109 by Michinao Hashimoto and co‐workers, the fabrication of complex networks of microchannels is enabled by the modularization of fluidic networks into printable elements. 2D and 3D networks of microchannels with high complexity (i.e., multiple branching networks) and small cross‐sectional dimensions (w = 75 μm and h = 100 μm) are readily achieved.
image


中文翻译:

通过模块化立体光刻技术制作复杂的3D流体网络

立体光刻(SL)3D打印机已用于制造微流体通道,尽管在可达到的通道几何形状方面存在限制。在Michinao Hashimoto及其同事的编号为1901109的文章中,通过将流体网络模块化为可打印元素,可以制造复杂的微通道网络。容易实现具有高复杂度的微通道的2D和3D网络(即,多个分支网络)和较小的横截面尺寸(w = 75μm,h = 100μm)。
图片
更新日期:2020-03-19
down
wechat
bug