当前位置: X-MOL 学术Ferroelectrics › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
The effect of piezoceramic volume fraction on properties of three-phase piezocomposites
Ferroelectrics ( IF 0.6 ) Pub Date : 2020-01-25 , DOI: 10.1080/00150193.2019.1691391
Junan Xu 1 , Likun Wang 1, 2 , Chao Zhong 1, 2
Affiliation  

Abstract In this study, three-phase piezocomposites are fabricated on the basis of the 1–3 composite structure and the cutting–filling method. The 1–3 piezocomposites are used with PZT-5A as the piezoelectrics and epoxy/silicone rubber as the matrix. The relationships between the performance parameters of the 1–3 composites and different ceramic volume fractions are analyzed via finite element simulation and experimental measurement. Composite samples with volume fraction of 0.20.8 are prepared through an experiment and tested using an impedance analyzer and a piezoelectric constant tester. Simulation results agree well with experiment results, thereby indicating that the composites have a high electromechanical coupling coefficient.

中文翻译:

压电陶瓷体积分数对三相压电复合材料性能的影响

摘要 本研究在1-3复合结构的基础上,采用切填法制备了三相压电复合材料。1-3 压电复合材料与 PZT-5A 作为压电体和环氧树脂/硅橡胶作为基体一起使用。通过有限元模拟和实验测量分析了 1-3 复合材料的性能参数与不同陶瓷体积分数之间的关系。通过实验制备体积分数为0.20.8的复合样品,并使用阻抗分析仪和压电常数测试仪进行测试。仿真结果与实验结果吻合较好,表明复合材料具有较高的机电耦合系数。
更新日期:2020-01-25
down
wechat
bug