当前位置: X-MOL 学术J. Electron. Mater. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Effects of Calcination Temperature on Magnetic and Microwave Absorption Properties of SrFe 12 O 19 /Ni 0.6 Zn 0.4 Fe 2 O 4 Composites
Journal of Electronic Materials ( IF 2.2 ) Pub Date : 2020-01-17 , DOI: 10.1007/s11664-020-07943-z
S. R. Saeedi Afshar , S. M. Masoudpanah , M. Hasheminiasari

SrFe12O19/Ni0.6Zn0.4Fe2O4 powders were prepared by the one-pot solution combustion method. The effect of calcination temperatures (700°C and 800°C) on phase, structure, microstructure and magnetic properties of SrFe12O19-x Ni0.6Zn0.4Fe2O4 (x = 0 wt.%, 10 wt.%, 20 wt.% and 30 wt.%) composites were investigated by x-ray diffractometry, scanning electron microscopy and vibrating sample magnetometry techniques. Strontium hexaferrite and spinel ferrite phases were formed through calcination at 800°C together with some α-Fe2O3 phase, while spinel ferrite was mainly crystallized at 700°C. The saturation magnetization slightly increased from 38 emu/g to 42 emu/g with the addition of 10 wt.% of Ni0.6Zn0.4Fe2O4 and then decreased to 36 emu/g at a calcination temperature of 800°C. The microwave absorption measurements in X-band (8–12 GHz) showed a minimum reflection loss of − 14.5 dB at 9.5 GHz for SrFe12O19-10 wt.% Ni0.6Zn0.4Fe2O4 composite synthesized at 800°C.



中文翻译:

煅烧温度对SrFe 12 O 19 / Ni 0.6 Zn 0.4 Fe 2 O 4复合材料的电磁吸收性能的影响

采用一锅法固溶燃烧法制备了SrFe 12 O 19 / Ni 0.6 Zn 0.4 Fe 2 O 4粉末。煅烧温度(700°C和800°C)对SrFe 12 O 19 - x Ni 0.6 Zn 0.4 Fe 2 O 4x的相,结构,显微组织和磁性能的影响 通过X射线衍射法,扫描电子显微镜和振动样品磁法技术研究了= 0重量%,10重量%,20重量%和30重量%的复合材料。锶六方晶系铁氧体和尖晶石铁氧体相通过煅烧在800℃下与一些的α-Fe形成在一起2 ö 3相,而尖晶石铁素体主要结晶在700℃下。通过添加10重量%的Ni 0.6 Zn 0.4 Fe 2 O 4,饱和磁化强度从38emu / g稍微增加到42emu / g ,然后在800℃的煅烧温度下降低到36emu / g。X波段(8–12 GHz)的微波吸收测量结果显示,对于9.5 GHz,SrFe 12的最小反射损耗为− 14.5 dB在800℃下合成的O 19 -10重量%Ni 0.6 Zn 0.4 Fe 2 O 4复合材料。

更新日期:2020-01-17
down
wechat
bug