当前位置:
X-MOL 学术
›
Mater. Lett.
›
论文详情
Our official English website, www.x-mol.net, welcomes your
feedback! (Note: you will need to create a separate account there.)
Evolution of microstructures and divorced eutectic TiC formed during solidification of the wear-resistant steel
Materials Letters ( IF 2.7 ) Pub Date : 2020-04-01 , DOI: 10.1016/j.matlet.2020.127406 Gang Du , Feng Liu , Jian-bing Li
Materials Letters ( IF 2.7 ) Pub Date : 2020-04-01 , DOI: 10.1016/j.matlet.2020.127406 Gang Du , Feng Liu , Jian-bing Li
Abstract The effect of cooling rate on the microstructure and TiC precipitation of TiC-reinforced wear-resistant steel was investigated by different casting techniques. Thermodynamic and solute segregation modeling was performed to determine the evolution of TiC fraction in wear-resistant steel after rapid solidification. The evolution of TiC fraction due to solute segregation within the framework of Clyne–Kurz (C-K) model was examined. The model prediction is consistent with the experimental results.
中文翻译:
耐磨钢凝固过程中显微组织的演变和离异共晶TiC的形成
摘要 通过不同的铸造工艺研究了冷却速度对TiC增强耐磨钢组织和TiC析出的影响。进行热力学和溶质偏析建模以确定快速凝固后耐磨钢中 TiC 分数的演变。在 Clyne-Kurz (CK) 模型的框架内检查了由于溶质偏析引起的 TiC 分数的演变。模型预测与实验结果一致。
更新日期:2020-04-01
中文翻译:
耐磨钢凝固过程中显微组织的演变和离异共晶TiC的形成
摘要 通过不同的铸造工艺研究了冷却速度对TiC增强耐磨钢组织和TiC析出的影响。进行热力学和溶质偏析建模以确定快速凝固后耐磨钢中 TiC 分数的演变。在 Clyne-Kurz (CK) 模型的框架内检查了由于溶质偏析引起的 TiC 分数的演变。模型预测与实验结果一致。