当前位置: X-MOL 学术Int. J. Concr. Struct. Mater. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Strength Calculation of Short Concrete-filled Steel Tube Columns
International Journal of Concrete Structures and Materials ( IF 3.6 ) Pub Date : 2018-12-01 , DOI: 10.1186/s40069-018-0322-z
Anatoly Leonidovich Krishan , Mariia Anatolyevna Astafeva , Elvira Petrovna Chernyshova

The aim of this work is to propose a technique to calculate the strength of short concrete-filled steel tube columns under the short-term action of a compressive load, based on the phenomenological approach and the theoretical positions of reinforced concrete mechanics. The main dependencies that allow the realization of the deformation calculation model in practice are considered. A distinctive feature of the proposed approach is the method of the multipoint construction of deformation diagrams for a concrete core and steel shell. In this case, two main factors are taken into account. First, the steel shell and the concrete core work under conditions of a complex stress state. Since the proposed dependencies to determine the strength and the ultimate relative strain of volumetrically compressed concrete are obtained phenomenologically, they are more versatile than the commonly used empirical formulas. In particular, they can be used for self-stressing, fine-grained and other types of concrete. Second, with a step-by-step increase in the relative deformation, the lateral pressure on a concrete core and a steel shell constantly change. Thus, the parametric points of the concrete and steel deformation diagrams also change at each step. This circumstance was not taken into account in earlier calculations. A comparison of the theoretical and experimental results indicates that the practical application of the developed calculation procedure gives a reliable and fairly stable estimate of the stress–strain state and the strength of concrete-filled steel tube columns.

中文翻译:

钢管混凝土短柱强度计算

这项工作的目的是基于现象学方法和钢筋混凝土力学的理论立场,提出一种计算短期压缩荷载作用下钢管混凝土短柱强度的技术。考虑了允许在实践中实现变形计算模型的主要依赖项。所提出的方法的一个显着特点是多点构造混凝土芯和钢壳变形图的方法。在这种情况下,需要考虑两个主要因素。首先,钢壳和混凝土芯在复杂的应力状态下工作。由于确定体积压缩混凝土的强度和极限相对应变的建议依赖性是从现象学上获得的,它们比常用的经验公式更通用。特别是,它们可用于自应力、细粒和其他类型的混凝土。其次,随着相对变形的逐步增加,混凝土芯和钢壳上的侧压力不断变化。因此,混凝土和钢筋变形图的参数点也在每一步发生变化。在早期的计算中没有考虑这种情况。理论和实验结果的比较表明,所开发的计算程序的实际应用提供了对应力应变状态和钢管混凝土柱强度的可靠且相当稳定的估计。细粒混凝土和其他类型的混凝土。其次,随着相对变形的逐步增加,混凝土芯和钢壳上的侧压力不断变化。因此,混凝土和钢筋变形图的参数点也在每一步发生变化。在早期的计算中没有考虑这种情况。理论和实验结果的比较表明,所开发的计算程序的实际应用提供了对应力应变状态和钢管混凝土柱强度的可靠且相当稳定的估计。细粒混凝土和其他类型的混凝土。其次,随着相对变形的逐步增加,混凝土芯和钢壳上的侧压力不断变化。因此,混凝土和钢筋变形图的参数点也在每一步发生变化。在早期的计算中没有考虑这种情况。理论和实验结果的比较表明,所开发的计算程序的实际应用提供了对应力应变状态和钢管混凝土柱强度的可靠且相当稳定的估计。混凝土和钢筋变形图的参数点也在每一步发生变化。在早期的计算中没有考虑这种情况。理论和实验结果的比较表明,所开发的计算程序的实际应用提供了对应力应变状态和钢管混凝土柱强度的可靠且相当稳定的估计。混凝土和钢材变形图的参数点也在每一步发生变化。在早期的计算中没有考虑这种情况。理论和实验结果的比较表明,所开发的计算程序的实际应用提供了对应力应变状态和钢管混凝土柱强度的可靠且相当稳定的估计。
更新日期:2018-12-01
down
wechat
bug