当前位置: X-MOL 学术Synth. Met. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Polydibenzothiophene: Effect of molecular weight on photoelectric performance
Synthetic Metals ( IF 4.0 ) Pub Date : 2020-03-01 , DOI: 10.1016/j.synthmet.2020.116319
Kaiwen Lin , Shouli Ming , Shuai Chen , Xiaobin Zhang , Ke Wang , Yuehui Wang , Jingkun Xu

Abstract Polydibenzothiophene (PDBT) was synthesized via palladium-catalyzed Suzuki coupling reaction from 2,8-dibromodibenzothiophene and 2,8-bis(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)-dibenzothiophene. Since molecular weight is an important factor determining the organic photoelectric performance, PDBT was prepared with molecular weight (Mn) varying from 6 kDa (extracted by dichloromethane, PDBT-D) to 12 kDa (extracted by chloroform, PDBT-C). Amorphous PDBT-D and PDBT-C both emitted blue photoluminescence with close PLQYs of 3.6 and 2.8 % in CHCl3, showed similar electrochemical band gap of 2.26 and 2.18 eV, presented no significant thermal transitions, and exhibited uniform homogeneous morphology. The photoelectric performance exhibited the obvious different compared with monomer DBT, observing obvious Tm and Tc as well as compact coralline surface morphology. To better understand the influence of Mn for the above organic photoelectric performance, DFT calculations were performed. We have calculated different repetitive unit of DBT, signed as (DBT)n, n means the number of repetitive unit. In this theoretical calculation, when the repetitive unit of DBT increase to 9 and 12, namely (DBT)9 and (DBT)12, the LUMO/HOMO levels and even dipole moment were not changed. Videlicet, in our model system, Mn of PDBT surpass about 1.6 kDa, its organic photoelectric properties would perform no significant change. The study provide guidance for effect research of molecular weight on photoelectric performance.

中文翻译:

聚二苯并噻吩:分子量对光电性能的影响

摘要 聚二苯并噻吩 (PDBT) 通过钯催化的 Suzuki 偶联反应由 2,8-二溴二苯并噻吩和 2,8-双(4,4,5,5-四甲基-1,3,2-二氧杂硼烷-2-基)-合成。二苯并噻吩。由于分子量是决定有机光电性能的重要因素,因此制备了分子量 (Mn) 从 6 kDa(二氯甲烷提取,PDBT-D)到 12 kDa(氯仿提取,PDBT-C)的 PDBT。无定形 PDBT-D 和 PDBT-C 在 CHCl3 中均发出蓝色光致发光,PLQY 接近 3.6% 和 2.8%,显示出相似的电化学带隙 2.26 和 2.18 eV,没有显着的热转变,并表现出均匀的均匀形态。光电性能与单体DBT相比表现出明显差异,观察到明显的 Tm 和 Tc 以及致密的珊瑚表面形态。为了更好地理解Mn对上述有机光电性能的影响,进行了DFT计算。我们计算了不同的DBT重复单元,记为(DBT)n,n表示重复单元的个数。在这个理论计算中,当 DBT 的重复单位增加到 9 和 12,即 (DBT)9 和 (DBT)12 时,LUMO/HOMO 能级甚至偶极矩都没有改变。Videlicet,在我们的模型系统中,PDBT 的 Mn 超过约 1.6 kDa,其有机光电性能不会发生显着变化。该研究为分子量对光电性能的影响研究提供指导。进行了 DFT 计算。我们计算了不同的DBT重复单元,记为(DBT)n,n表示重复单元的个数。在这个理论计算中,当 DBT 的重复单位增加到 9 和 12,即 (DBT)9 和 (DBT)12 时,LUMO/HOMO 能级甚至偶极矩都没有改变。Videlicet,在我们的模型系统中,PDBT 的 Mn 超过约 1.6 kDa,其有机光电性能不会发生显着变化。该研究为分子量对光电性能的影响研究提供指导。进行了 DFT 计算。我们计算了不同的DBT重复单元,记为(DBT)n,n表示重复单元的个数。在这个理论计算中,当 DBT 的重复单位增加到 9 和 12,即 (DBT)9 和 (DBT)12 时,LUMO/HOMO 能级甚至偶极矩都没有改变。Videlicet,在我们的模型系统中,PDBT 的 Mn 超过约 1.6 kDa,其有机光电性能不会发生显着变化。该研究为分子量对光电性能的影响研究提供指导。在我们的模型系统中,PDBT 的 Mn 超过约 1.6 kDa,其有机光电性能不会发生显着变化。该研究为分子量对光电性能的影响研究提供指导。在我们的模型系统中,PDBT 的 Mn 超过约 1.6 kDa,其有机光电性能不会发生显着变化。该研究为分子量对光电性能的影响研究提供指导。
更新日期:2020-03-01
down
wechat
bug