当前位置: X-MOL 学术Water Res. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Improved methodology to determine the fate and transport of microplastics in a secondary wastewater treatment plant.
Water Research ( IF 11.4 ) Pub Date : 2020-01-29 , DOI: 10.1016/j.watres.2020.115549
Subash Raju 1 , Maddison Carbery 2 , Aswin Kuttykattil 2 , Kala Senthirajah 3 , Anna Lundmark 4 , Zoe Rogers 4 , Suresh Scb 2 , Geoffrey Evans 5 , Thava Palanisami 3
Affiliation  

Wastewater treatment plants are a significant pathway of microplastics (MPs) to aquatic environments. To develop suitable management options and reduce microplastic emissions in treated effluent and sludge, we must first develop a reliable method to understand their transport and fate throughout the treatment process. An improved methodology was applied to determine the size, shape, polymer type and partitioning behaviour of MPs using a combination of oxidation treatment, fluorescent staining and Attenuated Total Reflectance Fourier Transform Infrared Spectroscopy (ATR-FTIR) to detect small MPs ≤20 μm in wastewater. The mean number of MPs (<5 mm) detected using this methodology was 11.80 ± 1.10 MP/L in raw sewage, 5.23 ± 0.25 MP/L in degritted wastewater, 7.91 ± 0.44 MP/L in waste activated sludge and 2.76 ± 0.11 MP/L in the final treated effluent. An increase in MPs following primary screening suggests that WAS is a sink for several stealth microplastics, including glitter, which is returned to the effluent during the treatment process. The estimated MP removal efficiency for the studied WWTP is relatively poor compared with global data for secondary WWTPs, which is likely due to the release of partially treated effluent into the Pacific Ocean via a second discharge point. The information generated through this study can be useful to; firstly, inform on-site wastewater management practices, and secondly, reduce MP concentrations in final treated effluents discharged to the marine environment.

中文翻译:

确定次级污水处理厂中微塑料的命运和运输的改进方法。

废水处理厂是微塑料(MPs)进入水生环境的重要途径。为了制定适当的管理方案并减少处理后的废水和污泥中的微量塑料排放,我们必须首先开发一种可靠的方法来了解其在整个处理过程中的运输和命运。结合氧化处理,荧光染色和衰减全反射傅立叶变换红外光谱(ATR-FTIR)的组合,使用一种改进的方法来确定MP的大小,形状,聚合物类型和分配行为,以检测废水中≤20μm的小MP 。使用此方法检测到的MP的平均数(<5 mm)为原污水中的11.80±1.10 MP / L,脱灰废水中的5.23±0.25 MP / L,废活性污泥中的7.91±0.44 MP / L和2.76±0。最终处理后的废水为11 MP / L。初步筛选后MP的增加表明,WAS是几种隐形微塑料(包括亮粉)的汇,在处理过程中会返回废水中。与次要污水处理厂的全球数据相比,所研究污水处理厂的MP去除效率估计相对较差,这很可能是由于部分处理后的污水通过第二个排放点释放到太平洋中。通过这项研究生成的信息可能对以下人员有用:首先,告知现场废水管理实践,其次,降低排放到海洋环境中的最终处理废水中的MP浓度。在处理过程中返回到废水中。与次要污水处理厂的全球数据相比,所研究污水处理厂的MP去除效率估计相对较差,这很可能是由于部分处理后的污水通过第二个排放点释放到太平洋中。通过这项研究生成的信息可能对以下人员有用:首先,告知现场废水管理实践,其次,降低排放到海洋环境中的最终处理废水中的MP浓度。在处理过程中返回到废水中。与次要污水处理厂的全球数据相比,所研究污水处理厂的MP去除效率估计相对较差,这很可能是由于部分处理后的污水通过第二个排放点释放到太平洋中。通过这项研究生成的信息可能对以下人员有用:首先,告知现场废水管理实践,其次,降低排放到海洋环境中的最终处理废水中的MP浓度。通过这项研究生成的信息可能对以下人员有用:首先,告知现场废水管理实践,其次,降低排放到海洋环境中的最终处理废水中的MP浓度。通过这项研究生成的信息可能对以下人员有用:首先,告知现场废水管理实践,其次,降低排放到海洋环境中的最终处理废水中的MP浓度。
更新日期:2020-01-29
down
wechat
bug