当前位置: X-MOL 学术Appl. Catal. A Gen. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Highly selective production of olefins from syngas with modified ASF distribution model
Applied Catalysis A: General ( IF 5.5 ) Pub Date : 2018-07-04 , DOI: 10.1016/j.apcata.2018.07.006
Fei Yu , Tiejun Lin , Xinxing Wang , Shenggang Li , Yongwu Lu , Hui Wang , Liangshu Zhong , Yuhan Sun

The Fischer-Tropsch to olefins (FTO) process is a promising alternative non-petroleum route to produce value-added olefins. In this study, Co2C nanoprisms formed via the CoMn spinel structure were used as the active phase for the FTO reaction and the product distribution was thoroughly investigated. A break from the traditional ASF model was found with much lower methane selectivity than that predicted by the ideal ASF law. In addition, the as-obtained hydrocarbons were mainly concentrated in the range of C2 to C12 with the C2-12 selectivity as high as 91% while the C13+ selectivity as low as 5%, indicating a much narrower distribution, which was rarely observed in the FT reaction. Moreover, ∼86% of the hydrocarbon products were olefins with very high olefin to paraffin ratios, suggesting a promising route for the selective production of olefins directly from syngas. A modified ASF distribution model was proposed with three different chain growth probabilities to rationalize the non-ASF phenomenon.



中文翻译:

使用改进的ASF分布模型从合成气中高度选择性地生产烯烃

费-托制烯烃(FTO)工艺是生产增值烯烃的有前途的非石油替代路线。在这项研究中,通过CoMn尖晶石结构形成的Co 2 C纳米棱镜被用作FTO反应的活性相,并对产物分布进行了彻底的研究。发现与传统ASF模型相比,甲烷的选择性比理想ASF法则所预测的低得多。另外,所得烃主要集中在C 2至C 12范围内,C 2-12选择性高达91%,而C 13+选择性低至5%,表明分布窄得多,这在FT反应中很少观察到。此外,约86%的烃产物是烯烃与链烷烃比率非常高的烯烃,这表明直接从合成气中选择性生产烯烃的途径很有希望。提出了一种改进的ASF分布模型,该模型具有三种不同的链增长概率,以合理化非ASF现象。

更新日期:2018-07-04
down
wechat
bug