当前位置: X-MOL 学术J. Alloys Compd. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Low temperature sintered magneto-dielectric ferrite ceramics with near net-shape derived from high-energy milled powders
Journal of Alloys and Compounds ( IF 6.2 ) Pub Date : 2018-04-11
Zhuohao Xiao, Xinyuan Sun, Hongfang Zhang, Chuanhu Wang, Lie Liu, Zhihong Yang, Tianshu Zhang, Ling Bing Kong

Nanosized Ni0.70Zn0.25Co0.05Fe1.90Mn0.02O4 ferrite ceramics were fabricated from high-energy ball milled powder mixtures with various ratios of Fe2O3/Fe as starting materials, in order to achieve magneto-dielectric materials with near net shape behavior for practical applications. The ferrite ceramics were obtained by sintering the milled powder compacts at 800 °C for 4 h, with a linear expansion of less than 4% as compared to the green pellets. The ceramics had an average grain size of less than 200 nm. The real part of relative permittivity decreases with increasing percentage of Fe2O3 used in the starting mixtures. The sample from the powder mixture with 50% Fe2O3 exhibits promising magneto-dielectric properties at frequencies of up to 90 MHz, which can be used for miniaturization of antennas at very high frequency (VHF) band.



中文翻译:

高能磨粉制得的近净形低温烧结磁电介质铁氧体陶瓷

以高能球磨的粉末混合物,以不同比例的Fe 2 O 3 / Fe为原料,制备了纳米尺寸的Ni 0.70 Zn 0.25 Co 0.05 Fe 1.90 Mn 0.02 O 4铁氧体陶瓷,以实现近净磁电介质。实际应用中的形状行为。铁氧体陶瓷是通过将研磨后的粉体在800°C下烧结4小时而获得的,与生料相比,其线性膨胀小于4%。陶瓷的平均粒径小于200nm。相对介电常数的实部随着Fe 2 O 3百分比的增加而降低用于起始混合物中。来自含50%Fe 2 O 3的粉末混合物的样品在高达90 MHz的频率下显示出有希望的磁介电性能,可用于超高频(VHF)频段的天线小型化。

更新日期:2018-04-11
down
wechat
bug