当前位置: X-MOL 学术Corros. Sci. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Fabrication of heterostructured β-Bi 2 O 3 -TiO 2 nanotube array composite film for photoelectrochemical cathodic protection applications
Corrosion Science ( IF 7.4 ) Pub Date : 2018-05-01 , DOI: 10.1016/j.corsci.2018.02.048
Zi-Chao Guan , Hai-Peng Wang , Xia Wang , Juan Hu , Rong-Gui Du

Abstract An ordered TiO2 nanotube array (NTA) film was first fabricated on a Ti substrate by anodization, β-Bi2O3 nanoparticles were then electrodeposited on the film for obtaining a heterostructured β-Bi2O3-TiO2 NTA composite film with enhanced photocathodic protection performances. Compared to the bare TiO2 NTA film, the composite film showed a wider light absorption region and higher charge carrier separation efficiency. Under white light illumination, the composite film as a photoanode made the potential of 403 stainless steel in a 0.5 M NaCl solution decrease by 450 mV relative to its corrosion potential, showing an effective photoelectrochemical cathodic protection effect.

中文翻译:

用于光电化学阴极保护应用的异质结构β-Bi 2 O 3 -TiO 2 纳米管阵列复合膜的制备

摘要 首先通过阳极氧化在 Ti 衬底上制备有序的 TiO2 纳米管阵列 (NTA) 薄膜,然后在薄膜上电沉积 β-Bi2O3 纳米颗粒,以获得具有增强光阴极保护性能的异质结构 β-Bi2O3-TiO2 NTA 复合薄膜。与裸 TiO2 NTA 薄膜相比,复合薄膜表现出更宽的光吸收区域和更高的电荷载流子分离效率。在白光照射下,复合膜作为光阳极使403不锈钢在0.5 M NaCl溶液中的电位相对于其腐蚀电位降低了450 mV,显示出有效的光电化学阴极保护作用。
更新日期:2018-05-01
down
wechat
bug