当前位置: X-MOL 学术J. Eur. Ceram. Soc. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
A corrosion mechanism of titanium diboride in KF−AlF3−Al2O3 melt
Journal of the European Ceramic Society ( IF 5.8 ) Pub Date : 2017-11-13 , DOI: 10.1016/j.jeurceramsoc.2017.11.030
Martin Kontrík , František Šimko , Dagmar Galusková , Martin Nosko , Valéria Bizovská , Michal Hičák , Dušan Galusek , Aydar Rakhmatullin , Michal Korenko

TiB2 samples were exposed to molten KF−AlF3−Al2O3: 54.8-42.1-3.1 mol% salt, at 680 °C for 50, 100 and 200 h. The corroded samples of TiB2 were investigated by SEM-EDX, EBSD, XRD, FT-IR and MAS NMR analysis. Corrosion was noted to occur predominantly as pitting attacks on the surface of the investigated materials. An inter-crystal and trans-crystal corrosion were identified on the cross-sections of the samples. A perturbation of Tisingle bondB bonds was detected (SEM-EDX and NMR analysis), at which a formation of orthorhombic TiO2 was also identified (EBSD analysis). The subsequent NMR, XRD and FT-IR analysis of the behaviour of TiB2 powder in molten KF−AlF3−Al2O3 supports the statement about the formation of orthorhombic TiO2 and mullite type of aluminium borates.



中文翻译:

二硼化钛在KF-AlF 3 -Al 2 O 3熔体中的腐蚀机理

将TiB 2样品在680°C下暴露于熔融的KF-AlF 3 -Al 2 O 3:54.8-42.1-3.1 mol%的盐中50、100和200 h。通过SEM-EDX,EBSD,XRD,FT-IR和MAS NMR分析研究了TiB 2腐蚀的样品。注意到腐蚀主要发生在被调查材料表面的点蚀。在样品的横截面上鉴定出晶间和晶腐蚀。单键检测到Ti B键的扰动(SEM-EDX和NMR分析),在该处还确定了正交晶TiO 2的形成(EBSD分析)。随后的TiB 2行为的NMR,XRD和FT-IR分析熔融KF-AlF 3 -Al 2 O 3中的粉末支持有关正交晶TiO 2和莫来石型硼酸铝形成的陈述。

更新日期:2017-11-13
down
wechat
bug