陈兴品 - 重庆大学 - 材料科学与工程学院

个人简介

学习工作经历 2011.09--至今重庆大学材料学院教授（破格），博士生导师 2007.09--2011.08 重庆大学材料学院副教授 2008.11--2008.12 法国Ecole de Mines, Saint Etienne, Visiting Scientist. 2003.04--2003.11 丹麦Risø National Laboratory，Guest Scientist. 2003.08--2003.09 德国同步辐射中心(DESY BW5), Guest Scientist. 2000.03--2004.07 清华大学材料系博士 1995.09--1998.07 福州大学材料学院硕士社会兼职国家科学技术奖评审组专家、教育部科学技术奖评审专家、中国材料研究学会会员、中国体视学学会会员、重庆大学-挪威科技大学联合研究中心成员。担任多家国际期刊审稿人。主讲课程本科生课程: 《材料科学基础》、《工程材料》、《创新能力培养》、《新生研讨课》研究生课程：《材料科学理论》、《汽车材料科学与工程基础》

研究领域

主要研究方向金属材料塑性变形、回复再结晶及织构控制；新型高性能钢铁材料；铝合金新材料与新工艺；高温超导材料；

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

论文及专著 [1] P. Ren; X.P. Chen*; C.Y. Wang; Y.X. Zhou; W.Q. Cao; Q. Liu; Evolution of microstructure, texture and mechanical properties of Fe–30Mn–11Al–1.2C low-density steel during cold rolling，Mater. Charact. 2021, 174: 111013 [2] J. Xie, X.P. Chen*, L. Mei, G.J. Huang, Q. Liu, Investigation of the hardening behavior during recrystallization，J. Alloys Comp. 2021, 859: 157807 [3] L.X. Wang, X.P. Chen*, T.H. Luo, H.T. Ni, L. Mei, P. Ren, Q. Liu, Y.F. Ding, L.J. Zhao, Rev. Adv. Mater. Sci. 2020, 59: 252-263 [4] X.P. Chen*, D. Chen, H.F. Sun, L.X. Wang, D. Shang. Rare Met. 2020, 39(8): 928-935 [5] F. Yu, X.P. Chen, H.F. Xu, H. Dong, Y.Q. Weng, W.Q. Cao, Current Status of Metallurgical Quality and Fatigue Performance of Rolling Bearing Steel and Development Direction of High-End Bearing Steel, Acta Metallurgica Sinica, 2020, 56(4): 513-522 [6] J. Xie, X.P. Chen*, L. Mei, P. Ren, G.J. Huang, Q. Liu, Multifractal analyses of serrated flow in friction stir processed Al–Mg-Sc alloy, Mater. Sci. Eng. A, 2020, 786: 139436 [7] P. Ren; X.P. Chen*; Z.X. Cao; L. Mei; W.J. Li; W.Q. Cao*; Q. Liu; Intragranular brittle precipitates improve strain hardening capability of Fe-30Mn-11Al-1.2C low-density steel，Mater. Sci. Eng. A, 2020, 775: 138984. [8] L. Mei, X.P. Chen*, P. Ren, Y.Y. Nie, G.J. Huang, Q. Liu, Effect of warm deformation on precipitation and mechanical properties of a cryorolled Al-Zn-Mg-Cu sheet, Mater. Sci. Eng. A, 2020, 771: 138608 [9] L.X. Wang; X.P. Chen*, W. Xie, P. Ren, L. Mei, Effect of Strain Path Change on Microstructure and Texture in Nickel During Cold Rolling and Annealing, Rare Metal Materials and Engineering, 2019, 48(9): 3022-3028 [10] X.P. Chen*, W.J. Li, P. Ren, W.Q. Cao, Q. Liu, Effects of C Content on Microstructure and Properties of Fe-Mn-Al-C Low-Density Steels, Acta Metallurgica Sinica, 2019, 55(8): 951-957 [11] P. Ren, X.P. Chen*, Z.X. Cao, L. Mei, W.J. Li, W.Q. Cao, Q. Liu, Mater. Sci. Eng. A, 2019, 752: 160-166 [12] L. Mei, X.P. Chen*, G.J. Huang, Q. Liu, Improvement of mechanical properties of a cryorolled Al-Mg-Si alloy through warm rolling and aging, J. Alloys Comp. 2019, 777: 259-2630 [13] X. P. Chen*, D. Chen, H.F. Sun, L.X. Wang, Effects of cold rolling reduction and annealing temperature on microstructure and texture evolution of Cu-44%Ni alloy, Rare Metal Materials and Engineering, 2018, 47(7): 1958-1964 [14] X.P. Chen*, S. Li, L. Mei, P. Ren, Q. Liu, Excellent combination of strength and ductility of Al-1.2Mn alloy with multi-scale lamellar structure, Mater. Sci. Eng. A, 2018, 729: 458-465 [15] X.P. Chen*, L. Mei, S. Li, L.M. Shang,Mater. Sci. Tech.2018, 34(4): 493-501 [16] X.P. Chen*, Y.P. Xu, P. Ren, W.J. Li, W.Q. Cao, Q. Liu, Aging hardening response and β-Mn transformation behavior of high carbon high manganese austenitic low-density Fe-30Mn-10Al-2C steel, Mater. Sci. Eng. A, 2017, 703: 167-172 [17] X.P. Chen*, H.F. Sun, D. Chen, L.X. Wang, Q. Liu, On recrystallization texture and magnetic property of Cu-Ni alloys， 2016, 121: 149-156 [18] L.X. Wang, X.P. Chen*, D. Chen, H.F. Sun, P. Ren, Q. Liu, Effect of preferential orientation on the annealing twins during the low temperature treatment in nickel, Mater. Sci. Eng. A, 2016, 676: 48-55 [19] X.P. Chen*, X.G Li, S. Li, Q. Liu, Continuous recrystallization of commercial Al-1.2 wt.%Mn alloy produced by thermomechanical processing，Mater. Lett, 2016, 180: 101-104 [20] X.P. Chen*, L. Mei, D. Chen, Z.L. Bao, Q. Liu, The effect of initial aging treatment on the microstructure and mechanical properties of cryorolled 6016 Al alloy, Mater. Sci. Eng. A, 2016, 667: 311-316 [21] X.P. Chen*, X.G. Li, M. Liu, B. Wang, Q. Liu, Bi-2223 grain growth in Ag/Ni composite-sheathed tapes sintered at different oxygen partial pressures, Phys. Status Solidi A 2015, 212(8): 1830-1835 [22] X.P. Chen*, L.F. Li, H.F. Sun, L.X. Wang, Q. Liu, Studies on the evolution of annealing twins during recrystallization and grain growth in highly rolled pure nickel, Mater. Sci. Eng. A, 2015, 622: 108-113 [23] X.P. Chen*, M. Liu, L. Mei, Q. Liu, Study of inhomogeneous distribution of Bi-2223 phase in Ag/Ni composite-sheathed tapes, Ceram. Int. 2014, 40(7): 9835-9839 [24] X.P. Chen*, L.X. Wang, R. Xiao, X.Y. Zhong, G.J. Huang, Q. Liu, Comparison of annealing on microstructure and anisotropy of magnesium alloy AZ31 sheets processed by three different routes, J. alloys comp. 2014, 604: 112-116 [25] X.P. Chen*, M. Liu, L.M. Shang, L. Mei, Q. Liu, Effects of heating rate on the phase and microstructure evolution in Bi-2223/Ag/Ni superconducting tapes, Ceram. Int. 2014, 40(5): 7293-7296 [26] X.P. Chen*, X. Chen, J.P. Zhang, Q. Liu, Effect of initial cube texture on the recrystallization texture of cold rolled pure nickel, Mater. Sci. Eng. A, 2013, 585: 66-70 [27] X. P. Chen*, X.W. Yu, M.Y. Li, H.B. Sun, Q. Liu, Phase and Texture Evolution of Ag/Ni Composite-Sheathed Bi-2223 Tapes with Different Thickness, J Supercond Nov Magn, 2013, 26(2): 333-336 [28] X.P. Chen*, X.W. Yu, M. Liu, H.B. Sun, J. Zheng, Q. Liu,Rare Metal Materials and Engineering, 2013, 42(3): 607-610 [29] X. P. Chen*, X.W. Yu, M. Liu, M.Y. Li, H.B. Sun, Q. Liu, Effect of Strain Ways on the Micro-Crack Formation and Critical Current of Bi-2223/Ag Superconducting Tapes, Rare Metal Materials and Engineering, 2012, 41(7): 1206-1210 [30] X.P. Chen*, X.W. Yu, M. Liu, M.Y. Li, H.B. Sun, Q. Liu, Fabrication and Properties of Ag–Ni Bimetallic Sheathed (Bi,Pb)-2223 Tapes, J Supercond Nov Magn, 2012, 25(5): 1501-1507 [31] X.P. Chen*, D. Shang, X. Chen, Y. B. Ji, P. Ji, C.S. Li, Q. Liu, Effect of Annealing Ways on the Formation of Cube Texture in Ni-5at% W Substrates for YBCO Coated Conductors, Rare Metal Materials and Engineering, 2011, 40(3): 322-324 [32] X.P. Chen*, X.W. Yu, J.P. Zhang, M.Y. Li, H.B. Sun, Q. Liu, Growth kinetics study of the (Bi,Pb)2Sr2Ca2Cu3O10 grains in Ag/Ni composite-sheathed tapes, Solid State Sciences 2011, 13(12): 2165-2171 [33] X.P. Chen*, X. W. Yu, R. Xiao, M. Y. Li, Z. Han, Critical current enhancement in Bi-2223/Ag superconducting tapes by controlling its first sintering process, J. Alloys Comp. 2011, 509(3): 1090-1093 [34] X.P. Chen*, X. W. Yu, M. Y. Li, Q. Liu, Z. Han, Effects of the Cooling Rate on the Microstructure and Properties of (Bi,Pb)-2223/Ag Tapes Rare Metal Materials and Engineering, 2011, 40(4): 737-740 [35] X. P. Chen*, J.-C. Grivel，M.Y. Li, Q. Liu, Z. Han, N. H. Andersen and J. Homeyer, Influence of Pb-rich phases of precursor powder on microstructural evolution in the silver-sheathed (Bi,Pb)2Sr2Ca2Cu3Ox superconducting tapes Materials Chemistry and Physics 2010, 123: 747-751 [36] X.P. Chen*, D. Shang, R. Xiao, G. J. Huang, Q. Liu, Influence of rolling ways on the microstructure and anisotropy of AZ31 alloy sheet, Trans. Nonferrous Met. Soc. China, 2010, 20: 589-593

学术兼职

社会兼职国家科学技术奖评审组专家、教育部科学技术奖评审专家、中国材料研究学会会员、中国体视学学会会员、重庆大学-挪威科技大学联合研究中心成员。担任多家国际期刊审稿人。