近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
1. Liu J, Katsuta S, Matsubara T, Wang P, Lin E, Hihara T, Kure-Chu SZ.
Al-Si-Cu-Ni-Mg鋳造合金上への自動車エンジン部品用自己潤滑性複合皮膜の作製及び熱処理因子の影響. 表面技術. 2024
Dec;75(12):1-7.
2. Xia H, Zhang W, Miao C, Chen H, Yi C, Shang Y, Shui T, Cao X, Liu J, Kure-Chu
SZ, Liang F, Moloto N, Xiong Y, Hihara T, Lu W, Sun Z. Ultra-thin amphiphilic
hydrogel electrolyte for flexible zinc-ion paper batteries. Energy Environ Sci.
2024 Sep;17(18):6507-6520.
3. Cao M, Pan L, Wang Y, Sui X, Liu XX, Feng S, Yuan P, Gao M, Liu J, Kure-Chu
SZ, Hihara T, Sun Z. Mechanical-durable and humidity-resistant dry-processed
halide solid-state electrolyte films for all-solid-state battery. Chin Chem
Lett. 2024 Aug.
4. Hirayama G, Fujimura M, Kamiya T, Liu J, Kure-Chu SZ.
電気接続部品用のAg-Graphene系複合めっきの形成及び諸特性に及ぼすAg+添加と銅基材の影響. 銅と銅合金. 2024 Aug;(1).
5. Li X, Lin E, Wang K, Ke R, Kure-Chu SZ, Xiao X. Fabrication and
Characterization of Hydroxyapatite Coatings on Anodized Magnesium Alloys by
Electrochemical and Chemical Methods Intended for Biodegradable Implants. Ceram
Int. 2024 Jul.
6. Liu J, Kure-Chu SZ, Katsuta S, Zhang M, Fang S, Matsubara T, Sakurai Y,
Hihara T, Baughman RH, Yashiro H, Pan L, Zhang W, Sun Z. Tenfold Enhancement of
Wear Resistance by Electrosynthesis of a Nanostructured Self-Lubricating
Al2O3/Sn(S)─MoS2 Composite Film on Al─Si─Cu Casting Alloys. Small Struct. 2024
Jul;240172.
7. Wang Y, Yuan P, Liu XX, Feng S, Cao M, Ding J, Liu J, Kure-Chu SZ, Hihara T,
Pan L, Sun Z. Sacrificial NH4HCO3 inhibits fluoropolymer/garnet interfacial
reactions towards 1mS cm−1 and 5V-level composite solid electrolyte. Adv Funct
Mater. 2024 Jun;2405060.
8. Chen X, Kure-Chu SZ, Liu J, Matsubara T, Sakurai Y, Hihara T, Lee SH, Osada
M, Okido M. Tuning the structures and conductivity of nanoporous TiO2–TiO films
through anodizing electrolytes as LIB anodes with ultra-high capacity and
excellent cycling performance. J Energy Storage. 2023 Oct;73:109231.
9. Liu J, Kure-Chu SZ, Sakurai Y, Chen X, Osada M. Understanding the fast
formation mechanism of hard nanoporous alumina films on aluminum in acidic
solutions containing nitric acid. Mater Chem Phys. 2023 Aug;128271.
10. Wu SZ, Takei Y, Hirayama G, Liu J, Tominaga S, Asai M.
電気接続部品向け高導電性Ag–Graphene複合めっきの実用技術および特性評価. 銅と銅合金. 2023 Aug;(1).
11. Kamiya T, Takei Y, Liu J, Kure-Chu SZ.
車載端子用の銅合金上への高導電性Sn–Graphene（Ag）複合めっきの創製と特性評価. 銅と銅合金. 2023 Aug;(1).
12. Lin E, Li X, Kure-Chu SZ, Li X, Xiao X. Effect of Electrical Parameters on
the Microstructure and Corrosion Resistance of Anodized Film of Mg-1Zn-1Gd Alloy
Based on Orthogonal Experiment Method. J Mater Eng Perform. 2023 Apr.
13. Chen X, Qin S, Denisov N, Kure-Chu SZ, Schmuki P. Pt-single atom decorated
TiO2: Tuning anodic TiO2 nanotube structure and geometry toward a
high-performance photocatalytic H2 production. Electrochim Acta. 2023
Feb;466:142081.
14. Wang S, Li X, Kure-Chu SZ, Deng B, Li X, Xiao X. Enhanced rollability of Mg
alloys by directly activated {1012} twinning during asymmetric rolling:
Experiments and finite element analysis. Mater Charact. 2022 Dec.
15. Sato H, Takei Y, Kamiya T, Kure-Chu SZ.
次世代車載端子向けの銅合金上への高導電性Sn-Graphene複合めっき膜の創製及び電気接触抵抗安定性. 銅と銅合金. 2022 Aug;(1).
16. Takei Y, Hirayama G, Sato H, Kure-Chu SZ.
次世代自動車端子向けの高導電性・耐摩耗性Ag-Graphene複合めっき膜の創製. 銅と銅合金. 2022 Aug;(1).
17. Chen X, Kure-Chu SZ, Matsubara T, Hihara T, Yashiro H, Okido M. Fabrication
and Electrochemical Performance of TiO2–TiN/Sn–SnO2 Composite Films on Ti for
LIB Anodes with High Capacity and Excellent Conductivity. Adv Mater Interfaces.
2022 Jul;9(19):2200956.
18. Kure-Chu SZ, Chen X, Kaai H, Ye Y, Matsubara T, Moriguchi Y, Hihara T,
Yashiro H. Direct fabrication of SnO2- and MoO3-modified nanoporous TiO2–TiO–TiN
composite films by hybrid anodization for high-safety lithium-ion battery
anodes. Electrochim Acta. 2021 May;387:138549.
19. Geng Z, Li X, Zhang Y, Lin E, Kure-Chu S, Li X, Xiao X. Corrosion resistance
and degradation behavior of anodized Mg-Gd alloys: A comparative study. Surf
Coat Tech. 2021 Apr;412:127042.
20. Lee SH, Yashiro H, Kure-Chu S. Effect of Silane Coupling Treatment on the
Joining and Sealing Performance between Polymer and Anodized Aluminum Alloy.
Korean J Mater Res. 2021 Mar;31(3):122-131.
21. Lee SH, Yashiro H, Kure-Chu S. Improvement of joining strength between
aluminum alloy and polymer by two–step anodization. Korean J Mater Res. 2020
Aug;53(4):144-150.
22. Sakaida S, Kure-Chu S*, Sato N, Hihara T, Yashiro H.
自動車端子用の銅合金上へのAg@Nano-Cハイブリッドめっきの諸特性に及ぼす影響因子. 銅と銅合金. 2020 Aug;59(1):270-275.
23. Lee SH, Yashiro H, Aoki K, Nanao H, Kure-Chu S*. Physical Properties of
Oxide Films on Mg Alloy Formed by Plasma Anodization. Korean J Mater Res. 2019
Nov;29(11):657-663.
24. Ye Y, Kure-Chu S, Sun Z, Matsubara T, Li Q, Hihara T. Controlled Fabrication
of Nanoporous Anodic Titania Films on Ti-6Al-4V Alloy for Enhanced
Self-Lubricating Properties by Combining Spark Anodization and
Electropulse-Assisted Ultrasonic Rolling. J Mater Eng Perform. 2019
Aug;26(1):1-11.
25. Sakaida S, Kure-Chu S*, Ishihara H, Hihara T, Yashiro H.
自動車端子向けの銅合金へのAg@Nano-C複合めっきの創製および特性評価. 銅と銅合金. 2019 Aug;58(1):171-176.
26. Lee SH, Yashiro H, Kure-Chu S*. Electrolyte Temperature Dependence on the
Properties of Plasma Anodized Oxide Films Formed on AZ91D Magnesium Alloy.
Korean J Mater Res. 2019 May;29(5):288-296.
27. Lee SH, Yashiro H, Kure-Chu S*. Comparative Evaluation of Surface Treatment
Effect of AD91D Alloy Material. Int J Adv Sci Res Eng. 2019 May;5(5):1-7.
28. Li X, Li X, Ye Y, Zhang R, Kure-Chu S, Tang G. Deformation mechanisms and
recrystallization behavior of Mg-3Al-1Zn and Mg-1Gd alloys deformed by
electroplastic-asymmetric rolling. Mater Sci Eng A. 2019 Jan;742:722-733.
29. Lee SH, Yashiro H, Kure-Chu S. Effect of Power Mode of Plasma Anodization on
the Properties of formed Oxide Films on AZ91D Magnesium Alloy. Korean J Mater
Res. 2018 Oct;28(10):544-550.
30. Ye Y, Kure-Chu S*, Sun Z, Matsubara T, Tang G, Hihara T, Okido M, Yashiro H.
Self-lubricated nanoporous TiO2-TiN films fabricated on nanocrystalline layer of
titanium with enhanced tribological properties. Surf Coat Tech. 2018
Aug;351:162-170.
31. Kure-Chu S*, Kawakami N, Ye Y, Yashiro H, Furukawa K, Saito Y.
銅合金板上銀めっき膜の高荷重環境下での摩耗・摩擦挙動およびメカニズム解明. 銅と銅合金. 2018 Aug;57(1):334-339.
32. Li X, Kure-Chu S*, Ogasawara T, Yashiro H, Wang H, Xu Z, Li X, Song G, Tang
G. Fabrication of a Gradient Nano-/Micro-structured Surface Layer on an Al–Si
Casting Alloy by Means of Ultrasonic–Electropulsing Coupling Rolling Process.
Acta Metall Sin. 2018 Apr;31(12):1258-1264.
33. Ye Y, Kure-Chu S*, Sun Z, Li X, Wang H, Tang G. Nanocrystallization and
enhanced surface mechanical properties of commercial pure titanium by
electropulsing-assisted ultrasonic surface rolling. Mater Design. 2018
Apr;149:214-227.
34. Kure-Chu S*, Sakuyama H, Suzuki E, Yashiro H, Sasaki K, Segawa H, Hihara T.
Tailoring of Morphology and Crystalline Structure of Nanoporous TiO2–TiO–TiN
Composite Films for Enhanced Capacity as Anode Materials of Lithium-Ion
Batteries. J Electrochem Soc. 2018 Feb;165(3):A477-A486.
35. Kure-Chu S*, Kawakami N, Ye Y, Yashiro H, Furukawa K, Saito Y, Sakata T.
銅合金板上銀めっき膜の微摺動摩耗挙動に対する荷重の影響. IEICE Tech Rep. 2018 Feb;54:7-12.
36. Lee SH, Yashiro H, Kure-Chu S. Fabrication of Plasma Electrolytic Oxidation
Coatings. J Korean Inst Surf Eng. 2017 Dec;50(6):1-7.
37. Li X, Li X, Kure-Chu S, Tang G. A Comparative Study on the Static
Recrystallization Behavior of Cold-Rolled Mg-3Al-1Zn Alloy Stimulated by
Electropulse Treatment and Conventional Heat Treatment. Metall Mater Trans A.
2017 Dec;50(2):1-15.
38. Sawada S, Kure-Chu S, Nakagawa R, Ogasawara T, Yashiro H, Saitoh Y. Effect
of Hardness on Wear and Abrasion Resistance of Silver Plating on Copper Alloy.
IEICE T Electron. 2017 Sep;E100-V(9):695-701.
39. Kure-Chu S, Ogasawara T, Nakagawa R, Oda N, Yashiro H, Sawada S, Saitoh Y,
Furukawa K. 銅合金板上への銀めっき膜の耐摩耗性に及ぼす硬さの影響およびそのメカニズム解明. 銅と銅合金. 2017
Sep;56(1):247-252.
40. Sawada S, Kure-Chu S, Nakagawa R, Ogasawara T, Yashiro H, Saitoh Y.
銅合金上銀めっきの摩耗・摩擦に対する硬度の影響 (機構デバイス). IEICE Tech Rep. 2017 Feb;116(459):19-24.
41. Yousefi E, Dolati A, Imanieh I, Yashiro H, Kure-Chu SZ. Kinetic study and
growth behavior of template-based electrodeposited platinum nanotubes controlled
by overpotential. Mater Chem Phys. 2017 Feb;187:141-148.
42. Segawa H, Naka T, Wada K, Kure-Chu SZ. Synthesis of laminated composites of
alumina and nickel oxides by AC anodization and electrodeposition. Surf Coat
Tech. 2017 Jan;310:93-97.
43. Kure-Chu S*, Nakagawa R, Ogasawara T, Yashiro H, Sawada S, Saitoh Y. Effect
of Hardness on Wear and Abrasion Resistance of Silver Plating on Copper Alloy.
IEICE Tech Rep EMD2016-57. 2016 Nov:41-46.
44. Kure-Chu SZ, Nakagawa R, Ogasawara T, Yashiro H, Sawada S, Shimizu A, Saitoh
Y. Sliding Friction, Wear and Tribofilm Formation of Silver Films Electro-plated
on Copper Alloy Sheets. Proc 62nd IEEE Holm Conf Electr Contacts. 2016
Oct:135-140.
45. Kure-Chu SZ, Sakuyama H, Saito S, Miura S, Yashiro H, Hirahara H, Segawa H,
Wada K, Inoue S. Controllable Fabrication of Multi-tiered Nanoporous Anodic
TiO2-TiN Composite Films as High-Performance Anode Materials for Lithium-Ion
Batteries. Electrochim Acta. 2016 Sep;212:481-491.
46. Kure-Chu SZ, Ogasawara T, Ye R, Yashiro H, Sasaki K. Thermal Stability and
Sulfidizing Resistance of High Reflective Multilayered Sn/Ag3Sn and Sn/Ag Films
Electrodeposited on Cu Alloy Sheets. Electrochim Acta. 2016 Sep;212:380-389.
47. Kure-Chu S, Ogasawara T, Nakagawa R, Yashiro H.
Cu板上へのナノ積層型Sn/Ag₃Sn(/Ag)多層めっきの微細構造およびその特性評価. 銅と銅合金. 2016 Aug;55(1):69-73.
48. Kure-Chu S, Miura S, Yashiro H.
大容量Li二次電池負極に向けたCu板上への鱗片状Sn-SnO₂-TiO₂/Cu₆Sn₅ハイブリッドめっきの創製. 銅と銅合金. 2016
Aug;55(1):64-68.
49. Zhang B, Wang H, Zhang S, Song G, Kure-Chu SZ, Wang X, Kuang J, Tang G.
Effect of electropulsing-ultrasonic surface treatment on the surface properties
and the corrosion behavior of 45 steel. J Mater Res. 2016 Jul;31(14):2114-2124.
50. Ye Y, Kuang J, Kure-Chu SZ, Song G, Sun Z, Tang G. Improvement of
microstructure and surface behaviors of welded S50C steel components under
electropulsing assisted ultrasonic surface modification. J Mater Res. 2016
Jul;31(14):2125-2135.
51. Kure-Chu SZ, Osaka K, Yashiro H, Wada K, Segawa H, Inoue S. Facile
Fabrication of Ordered Multi-Tiered Hierarchical Porous Alumina Nanostructures
with Multiple and Fractional Ratios of Pore Interval toward Multifunctional
Nanomaterials. ECS J Solid State Sci Technol. 2016 May;5(5):P285-P292.
52. Kure-Chu SZ*, Satoh A, Miura S, Mizuhashi M, Yashiro H. Controllable
Fabrication of Nanostructured Sn-TiO2 Composite Films on Cu Sheets as Anode
Materials for Lithium-Ion Battery. ECS Trans. 2015 Sep;64(29):68-80.
53. Kure-Chu SZ*, Satoh A, Miura S, Mizuhashi M, Yashiro H. Nanoporous
Sn-SnO2-TiO2 Composite Films Electrodeposited on Cu Sheets as Anode Materials
for Lithium-Ion Batteries. J Electrochem Soc. 2015 Jul;162(7):D305-D311.
54. Kure-Chu SZ*, Osaka K, Yashiro H, Segawa H, Wada K, Inoue S. Controllable
Fabrication of Networked Three-Dimensional Nanoporous Anodic Alumina Films on
Low-Purity Al Materials. J Electrochem Soc. 2015 Jan;162(1):C24-C34.
55. Kure-Chu SZ, Ogasawara T, Yashiro H, Ye R, Hhosokai T, Uchidate M, Suziki E,
Naito T. Multilayered Sn/Ag3Sn Electroplating on Cu Alloys for High Reliable
Electronic/Electric Materials. 2014 Int Conf Electron Packag (ICEP). 2014
Dec:168-172.
56. Kure-Chu S, Satoh A, Yashiro H. 銅板上へのSn-TiO₂ハイブリッドめっきの作製およびその構造特性. 銅と銅合金.
2014 Aug;53(1):261-265.
57. Kure-Chu SZ*, Yashiro H. Corrosion Resistance of Multilayered Sn/Ag3Sn Films
Electroplated on Cu Alloys for Highly Reliable Automotive Connectors. J
Electrochem Soc. 2014 Jul;161(10):C441-C449.
58. Kure-Chu SZ. スマートアノード酸化とナノめっきによる多様な機能性ナノ構造体の創製. 軽金属. 2014 Jun;64(6):249-258.
59. Kure-Chu SZ, Ogasawara T, Yashiro H, Ye R, Hosokai T, Uchidate M, Suziki E,
Naito T. Multilayered Sn/Ag3Sn Electroplating on Cu Alloys for High Reliable
Electronic/Electric Materials. Proceedings of International Conference on
Electronics Packaging (ICEP-2014). 2014 Apr: 3-4.
60. Chu SZ, Osaka K, Yashiro H, Segawa H, Wada K, Inoue S. Three-Dimensional
Networked Nanoporous Anodic Alumina Films with Vertical and Transverse Pores
Fabricated on Al with Different Purity. CORROSION POSTERS (GENERAL) - 224TH ECS
MEETING. 2014 Jan; 58(38): 61-70.
61. Chu-Kure SZ, Yashiro H. Evaluation of Corrosion Resistance of Multilayered
Sn/Ag3Sn Electroplating on Cu Alloys. ECS Transactions. 2013 Mar; 58(41):
103-113.
62. Yashiro H, Yokozawa Y, Kure-Chu SZ, Kumagai M, Myung S, Katada Y.
硝酸塩溶液中でカソード処理されたステンレス鋼の表面特性とPEFCセパレータへの適用 (Surface Characteristics of Stainless
Steel Cathodically Treated in Nitrate Solution and Its Application to PEFC
Separators). Zairyo-to-Kankyo. 2013; 62(11): 439-442.
63. Segawa H, Kure-Chu SZ, Inoue S. 陽極酸化法によるナノ構造の制御と機能化 (Control and
Functionalization of Nanostructures by Anodic Oxidation). マテリアルインテグレーション. 2012
Oct; 25(10): 32-37.
64. Chu SZ, Kumagai J, Tamagawa T, Aida M, Okita T. Cu合金へのSn/Ag多層めっきとAgめっきの耐熱性
(Heat Resistance of Sn/Ag Multilayered Plating and Ag Plating on Cu Alloys).
銅と銅合金. 2012 Sep; 51(1): 201-206.
65. Inoue S, Chu SZ, Wada K. An Approach to Nanoglasses through Anodic Oxidation
of Sputtered Aluminum on Glass Surface. MRS Online Proceeding Library. 2011 Dec;
749: 749-757.
66. Chu SZ, Kumagai J, Okita T, Tamagawa T, Okada K, Nakaya K, Kato N.
銅合金へのSn/Ag多層めっきによる高温時接触抵抗安定化およびそのメカニズム (Stabilization of Contact Resistance at
High Temperatures by Sn/Ag Multilayered Plating on Cu Alloys and Its Mechanism).
表面技術. 2011 Sep; 62(11): 27-35.
67. Chu SZ, Wada K, Inoue S, Segawa H. Direct Growth of Highly Ordered
Crystalline Zirconia Nanowire Arrays with High Aspect Ratios on Glass by a
Tailored Anodization. Journal of The Electrochemical Society. 2011; 158(5):
C148-C157.
68. Chu SZ, Okita T, Sakurai K, Kumagai J. Sn/Ag多層めっきの耐微摺動摩耗性及びそのメカニズムについて
(Micro-Oscillating Wear Resistance of Sn/Ag Multilayered Plating and Its
Mechanism). 銅と銅合金. 2009 Aug; 48(1): 219-224.
69. Chu SZ, Kumagai J. 電気部品用Sn/Ag多層めっきの諸特性 (Properties of Sn/Ag Multilayered
Plating for Electronic Components). 銅と銅合金. 2008 Aug; 47(1): 112-116.
70. Chu SZ, Kawamura H, Mori M. Ordered Integrated Arrays of Pd and Pt
nanotubules on Al with Controllable Dimensions and Tailored Morphologies.
Journal of The Electrochemical Society. 2008; 155(5): D414-D418.
71. Chu SZ, Kawamura H, Mori M. Fabrication and Characteristics of Pd
Nanoparticles/Nanofilms on Ceramics toward Catalytic Electrodes. Electrochimica
Acta. 2007 Nov; 53(1): 92-99.
72. Chu SZ, Wada K, Inoue S, Isogai M, Katsuta Y, Yasumori A. Large-Scale
Fabrication of Ordered Nanoporous Alumina Films with Arbitrary Pore Intervals by
Critical-Potential Anodization. Journal of The Electrochemical Society. 2006
Sep; 153(9): B384-B391.
73. Kawamura H, Chu SZ, Mori M, Hashimoto S, Uotani M. Electrochemical Study of
Pd-coated Perovskite Anodes in Sulfur-based Hybrid Cycle. Proceedings of The
16th World Hydrogen Energy Conference 2006 (WHEC 2006). 2006 Sep: 2354-2361.
74. Inoue S, Todoroki S, Suehara S, Konishi T, Chu SZ, Wada K, Kikkojin T,
Isogai M, Katsuta Y, Sakamoto T, Yasumori A. Advanced Approaches to Functional
Glasses. Journal of Non-Crystalline Solids. 2006 Aug; 352(6-7): 632-645.
75. Kawamura H, Mori M, Chu SZ, Uotani M. Electrical Conductive Perovskite
Anodes in Sulfur-based Hybrid Cycle. Proceedings of The 3rd Information Exchange
Meeting on the Nuclear Production of Hydrogen (3rd HTTR Workshop). 2006 Aug:
365-397.
76. Chu SZ, Inoue S, Wada K, Hishita S. Fabrication of Self-Organized Titania
Nanostructures on Glass by Combinational Anodizing Technology. ECS Transactions.
2006 Mar; 1: 79-90.
77. Chu SZ, Wada K, Inoue S, Isogai M, Yasumori A. Fabrication of Ideally
Ordered Alumina Nanoporous Films and Integrated Alumina Nanotubule Arrays by
High-Field Anodization. Advanced Materials. 2005 Sep; 17(17): 2115-2119.
78. Chu SZ, Wada K, Inoue S, Suzuki J. Fabrication and Photocatalytic
Characteristics of Ordered Nanoporous X-doped (X = N, C, S, Ru, Te, Si)
TiO2/Al2O3 Films on ITO/Glass. Langmuir. 2005 Sep; 21(17): 8035-8041.
79. Chu SZ, Inoue S, Wada K, Hishida S, Kurashima K. Self-Organized Nanoporous
Anodic Titania Films and Ordered Quantum Titania Nanodots/Nanorods on Glass.
Advanced Functional Materials. 2005 Aug; 15(8): 1343-1349.
80. Chu SZ, Inoue S, Wada K, Kurashima K. Fabrication of Integrated Arrays of
Ultrahigh Density Magnetic Nanowires (Fe-Pt, Co-Pt, Ni-Pt alloys) on Glass by
Anodization and Electrodeposition. Electrochimica Acta. 2005 May; 51(5):
820-826.
81. Chu SZ, Inoue S, Wada K, Hishida S, Kurashima K. A New Electrochemical
Lithography- Fabrication of Versatile Self-Organized Titania Nanostructures on
Glass by Combinatorial Anodization. Journal of The Electrochemical Society. 2005
Mar; 152(3): B116-B124.
82. Chu SZ, Inoue S, Wada K, Kanke Y, Kurashima K. Fabrication and
Characterizations of Integrated Ultrahigh Density Fe-Pt Alloy Nanowire Arrays on
Glass. Journal of The Electrochemical Society. 2005 Jan; 152(1): C42-C47.
83. Chu SZ, Inoue S, Wada K, Kurashima K. Fabrication and Structural
Characteristics of Nano-crystalline Fe-Pt Thin Films and Fe-Pt Nanowire Arrays
Embedded in Alumina Films on ITO/Glass. Journal of Physical Chemistry B. 2004
Sep; 108(18): 5582-5587.
84. Chu SZ, Inoue S, Wada K, Hishida S. Fabrication of TiO2-Ru(O2)/Al2O3
Composite Nanostructures on Glass by Al Anodization and Electrodeposition.
Journal of The Electrochemical Society. 2004 Jan; 151(1): C38-C44.
85. Inoue S, Chu SZ, Wada K. An Approach to Nanoglasses through Anodic Oxidation
of Sputtered Aluminum on Glass Surface. MRS Symposium-Proceedings. 2003 Dec:
397-403.
86. Inoue S, Chu SZ, Wada K, Kanke Y. Preparation of Fe-Pt Nanowires through
Anodic Oxidation of Sputtered Aluminum on Glass Surface. Materials Research
Society Symposium- Proceedings. 2003 Dec: 147-151.
87. Sakairi M, Kato Z, Chu SZ, Takahashi H, Abe Y, Katayama N. Local Removal of
Thick Anodic Oxide Film on Aluminum with a Photon Rupture Technique and Local
Metal Deposition. Electrochemistry. 2003 Nov; 71(11): 920-926.
88. Chu SZ, Wada K, Inoue S, Todoroki S. Fabrication and Characteristics of
Nanostructures on Glass by Al Anodization and Electrodeposition. Electrochimica
Acta. 2003 Oct; 48(20-22): 3147-3153.
89. Chu SZ, Wada K, Inoue S, Hishita S, Kurashima K. Fabrication and Structural
Characteristics of Ordered TiO2-Ru(-RuO2) Nanorods in Porous Anodic Alumina
Films on ITO/Glass Substrate. Journal of Physical Chemistry B. 2003 Aug;
107(37): 10180-10184.
90. Chu SZ, Wada K, Inoue S, Todoroki S. Fabrication of oxide nanostructures on
glass by aluminum anodization and sol–gel process. Surface & Coatings
Technology. 2003 Aug; 169-170: 190-194.
91. Inoue S, Chu SZ, Wada K, Li D, Haneda H. New roots to formation of
nanostructures on glass surface through anodic oxidation of sputtered aluminum.
Science and Technology of Advanced Materials. 2003 Jul; 4(4): 269-276.
92. Chu SZ, Inoue S, Wada K, Li D, Haneda H. Highly Porous
(TiO2–SiO2–TeO2)/Al2O3/TiO2 Composite Nanostructures on Glass with Enhanced
Photocatalysis Fabricated by Anodization and Sol-Gel Process. Journal of
Physical Chemistry B. 2003 Jun; 107(27): 6586-6589.
93. Chu SZ, Inoue S, Wada K, Li D, Haneda H. Highly Porous TiO2/Al2O3 Composite
Nanostructures on Glass by Anodization and Sol-Gel Process: Fabrication and
Photocatalytic Characteristics. Journal of Materials Chemistry. 2003 Apr; 13(4):
866-870.
94. Chu SZ, Inoue S, Wada K. An Integrated Array of TiO2-SiO2-TeO2 Nanotubules
on Glass: Fabrication and Structural Characteristics. Advanced Materials. 2002
Nov; 14(23): 1752-1756.
95. Chu SZ, Inoue KS, Wada K, Todoroki S, Takahashi YK, Hono K. Fabrication and
Characteristics of Ordered Ni Nanostructures on Glass by Anodization and Direct
Current Electrodeposition. Chemistry of Materials. 2002 Nov; 14(11): 4595-4602.
96. Chu SZ, Wada K, Inoue S, Todoroki S. Formation and Microstructures of Anodic
Alumina Films from Aluminum Sputtered on Glass Substrate. Journal of The
Electrochemical Society. 2002 Jul; 149(7): B321-B327.
97. Chu SZ, Wada K, Inoue S, Todoroki S. Synthesis and Characterization of
Titania Nanostructures on Glass by Al Anodization and Sol-gel Process. Chemistry
of Materials. 2002 Jan; 14(1): 266-272.
98. Kikuchi T, Chu SZ, Jonishi S, Sakairi M, Takahashi H. Local Surface
Modification of Aluminum by Laser Irradiation. Electrochimica Acta. 2001 Mar;
47(1-2): 225-232.
99. Takahashi H, Sakairi M, Kure-Chu SZ, Watanabe K, Kikuchi T, Miwa K, Kato Y,
Uenishi S. アノード酸化を基礎とする新規なアルミニウム表面改質・加工技術 -機能性表面の創成を目指して- (Novel Surface
Modification and Processing Technologies for Aluminum Based on Anodizing
-Towards the Creation of Functional Surfaces-). Keikinzoku (Journal of Japan
Institute of Light Metals). 2000 Nov; 50(11): 544-551.
100. Sun SP, Li J, Yin Y, Chu SZ, Qiu ZX. The Investigation of Al-Mn Coatings
Electrodeposited from Molten Salt on Steel. Corrosion Science and Protection
Technology (CHN). 2000 Aug; 12(5): 287-294.
101. Chu SZ, Sakairi M, Takahashi H, Simamura K, Abe Y. Laser-assisted
Electroless Ni-P Deposition at Selected Areas on Al (-Mg, Si, Cu) Alloys.
Journal of The Electrochemical Society. 2000 Jun; 147(6): 2181-2189.
102. Chu SZ, Sakairi M, Takahashi H, Shimamura K, Abe Y. Local Metal Deposition
on Aluminum with Laser Irradiation and Electroless-plating. Proceedings of
Surface Finishing of Aluminum. 2000 May: 21-25.
103. Chu SZ, Sakairi M, Takahashi H. Electroless Copper Deposition at Selected
Area on Aluminum with Pulsed YAG Laser. Journal of The Electrochemical Society.
2000 Apr; 147(4): 1423-1431.
104. Chu SZ. Local Deposition of Ni-P and Copper on Aluminum by Anodizing, Laser
Irradiation and Electroless-Plating [Thesis]. 2000 Mar: 1-180.
105. Chu SZ, Sakairi M, Takahashi H, Qiu ZX. Nucleation of Metals on Aluminum
by Laser Irradiation and the Effect on Ni-P Electroless Deposition. Journal of
The Electrochemical Society. 1999 Aug; 146(8): 2996-3005.
106. Sun SP, Li J, Yin YB, Wang Y, Chu SZ, Yang ZH, Qiu ZX. Effects of Ce and Ti
on Al-Mn Alloy Electrodeposition Coating on Steel. J. Northeastern University
(Natural Science) (CHN). 1999 Aug; 20(4): 395-397.
107. Chu SZ, Sakairi M, Takahashi H, Qiu ZX. Local Deposition of Ni-P Alloy on
Aluminum by Laser Irradiation and Electroless-Plating. Journal of The
Electrochemical Society. 1999 Feb; 146(2): 537-546.
108. Chu SZ, Nukui K, Wakabayashi J, Kato Z, Kikuchi T, Sakairi M, Takahashi H.
Fabrication of Self-Organized Titania Nanostructures on Glass by Combinational
Anodizing Technology. Proceedings of International Symposium of
Environmental-Conscious Innovative Materials Processing with advanced Energy
Sources (Ecomap-98). 1998 Jul: 224-231.
109. Chu SZ, Qiu ZX, Yang ZH, He MH, Li QF. Structure and properties of Al-Mn
Alloys Coatings electroplated from Molten Salts. The Chinese Journal of
Non-ferrous Metals. 1998 Mar; 8(8): 95-100.
110. Chu SZ, Qiu ZX, Wang BG, Zhang Z. Investigation on Al-Mn Alloy
Electroplating technology in Molten Salts. Non-Ferrous Metals (CHN). 1997 May;
49(2): 57-63.
111. Chu SZ. Al-Mn-(Ti) Alloy Elelctrodeposition with High Corrosion Resistance
on Carbon Steelby from Molten Salts. 1997.
112. Si XL, Chu SZ, Wu F. Effects of Stirring of Compress Air on the Bright
Nickel Electroplating. J. Shenyang Polytechnic Univ.(CHN). 1996 Dec; 18(4):
54-57.
113. Chu SZ, Qiu ZX. Investigation on Al-Mn-Ti Alloy Electrodeposition from
Molten Salts on Carbon Steel. Proceedings of International Symposium on
Non-Ferrous Metallurgy and its Alloy Materials. 1996 Sep: 54-60.
114. Chu SZ, Qiu ZX. Survey and Prospects of Al-Mn Alloy Electroplating
Technology from Molten Salts. Light Metals (CHN). 1996 Aug; 49(2): 30-34.
115. Si XL, Chu SZ, Zhou HQ, Wu F. The Investigation of the Resolutive
Properties of Zn-Ni Alloy Electroplating. J. Shenyang Polytechnic Univ.(CHN).
1996 Jun; 18(2): 64-69.
116. Si XL, Wu F, Chu SZ. Investigation of Process and Performance of
Electroless Ni-Sn-P Deposition. Functional Materials (CHN). 1995 Aug; 26(2):
189-195.
117. Wu F, Chu SZ. Process and Corrosion Resistance of Ni-Cu-P Electroless
Deposition. Plating and Finishing (CHN). 1994 Sep; 16(5): 36-41.
118. Wu F, Chu SZ, Zhou HQ. The Investigation of the Effects of Construction of
Zn-Ni Alloy Coating and Its Properties. J. Shenyang Polytechnic Univ.(CHN). 1994
Apr; 16(4): 40-46.
119. Wu F, Chu SZ. The Study of the Ni-B-Al2O3 Combined Electroless Plating.
Surface Technology (CHN). 1994 Apr; 23(4): 154-158.
120. Chu SZ, Wu F. Study on Composite Ni-P-SiC Electroless-plating. J. Shenyang
Polytechnic Univ.(CHN). 1993 Mar; 15(1): 87-91.
121. Wu F, Chu SZ. An investigation of an electroplating technology of
anti-corrosion and decorative Zn-Ni alloy coating. J. Shenyang Polytechnic
Univ.(CHN). 1991 Jun; 13(2): 113-117.
122. Chu SZ. Zn-Ni Alloy Elelctrodeposition with High Corrosion Resistance and
High Decorition on Carbon Steelby Using Zn-Ni Alloy Anodes. 1988 Jan.
123. Chu SZ. Process Design of Glass Bottles Production Lines. 1982 Jul.
京公网安备 11010802027423号