个人简介
工作经历
东南大学,材料科学与工程学院,南京,中国
● 2019.09 至今 教授,国家级青年人才,东南大学青年首席教授,江苏省“双创人才”
Monash 大学,材料科学与工程学院,墨尔本,澳大利亚
● 2015.02 至 2019.09 博士后
教育背景
Monash 大学,材料科学与工程学院,墨尔本,澳大利亚
● 博士 , 材料科学与工程 (2015)
Monash 大学,材料科学与工程学院,墨尔本,澳大利亚
● 本科 , 材料科学与工程 (1 st Class Honors) (2011)
中南大学,材料科学与工程学院,长沙
● 本科 , 材料科学与工程 (2011)
主持项目
● 南京市留学人员科技创新项目 2020-2021
● 江苏省自然科学基金(青年项目)2021-2023
● 国家自然科学基金(青年项目) 2021-2023
参与项目
● 2011-2015 开发超低碳低合金超高强度马 氏体钢 ( Arcelor-Mittal )
● 2015-2017 第三代中锰钢的退火渗碳体的研究 ( Arcelor-Mittal )
● 2018 硅基太阳能电池中无铅焊锡层在热疲劳后的失效分析
● 2018 澳洲国防舰艇船体失效分析及合金改进
研究领域
●中锰先进高强度钢的强韧化研究
●钢铁及高熵合金表面析出相研究
●高熵合金的合金设计、强韧化和耐磨研究
● 铝合金室温动态循环强化的研究
● 开发超低碳低合金超高强度马 氏体钢 ( Arcelor-Mittal )
● 利用“化学图案法”开发第三代中锰先进高强钢
● 铁金、铁钼、铁钨二元系合金的表面析出相研究
● 铝合金室温动态循环强化的研究
● 铝合金的表面析出相及其对腐蚀性能的影响
近期论文
查看导师新发文章
(温馨提示:请注意重名现象,建议点开原文通过作者单位确认)
1. X.L. An, Z.D. Liu, L.T. Zhang, Y. Zou, X.J. Xu, C.L. Chu, W. Wei, W.W. Sun* ,"A new strong pearlitic multi-principal element alloy to withstand wear at elevated temperatures." Acta Materialia, 227 (2022), 117700. ( 金属材料领域顶级期刊 Top1 )
2. X.L. An, R.M. Zhang, Y.X. Wu, Y. Zou, L.T. Zhang, K. Zhang, L.Y. Wang, Y.S. Li, C.R. Hutchinson, W.W. Sun* , "The role of retained austenite on the stress-strain behaviour of chemically patterned steels." Materials Science and Engineering A, 831 (2022) 142286.
3. W.W. Sun , Y.M. Zhu, R.K.W. Marceau, L.Y. Wang, Q. Zhang, X. Gao, C.R. Hutchinson*. " Precipitation strengthening of aluminum alloys by room-temperature cyclic plasticity ." Science, 363(2019): 972-975. (国际顶级综合期刊)
4. W.W. Sun , Y.X. Wu, S.C. Yang, C.R. Hutchinson*, "Advanced high strength steel (AHSS) development through chemical patterning of austenite." Scripta Materialia, 146 (2018), 60-63. (金属材料领域顶级期刊 Top2 )
5. W.W. Sun , H. Fang, N. H. van Dijk, S. van der Zwaag, and C. R. Hutchinson*. Linking Surface Precipitation in Fe-Au Alloys to Its Self-healing Potential During Creep Loading. Metallurgical and Materials Transactions A: 48.5 (2017): 2109-2114.
6. W.W. Sun , H.S. Zurob and C.R. Hutchinson*. "Coupled solute drag and transformation stasis during ferrite formation in Fe-C-Mn-Mo . ", Acta Materialia, 139 (2017): 62-74.
7. W.W. Sun , R.K.W. Marceau, M.J. Styles, D. Barbier, C.R. Hutchinson*. "G phase precipitation and strengthening in ultra-high strength ferritic steels: towards lean ‘maraging’ metallurgy." Acta Materialia, 130 (2017): 28-46.
8. L.Y. Wang, Y.X. Wu, W.W. Sun , Y. Bréchet, L. Brassart, A. Arlazarov, C.R. Hutchinson*, "Transitions in the strain hardening behaviour of tempered martensite." Acta Materialia 221 (2021) 117397.
9. L.Y. Wang, Y.X. Wu, W.W. Sun , Y. Bréchet, L. Brassart, A. Arlazarov, C.R. Hutchinson*, "Strain hardening behaviour of as-quenched and tempered martensite." Acta Materialia 199 (2020) 613–632.
10. Y.X. Wu, L.Y. Wang, W.W. Sun , M.J. Styles, A.J. Studer, Y. Bréchet, A. Arlazarov, C.R. Hutchinson*, "Austenite formation kinetics from multicomponent cementite-ferrite aggregates." Acta Materialia 196 (2020) 470–487.
11. L.Y. Wang, Y.X. Wu, W.W. Sun , Y. Bréchet, L. Brassart, A. Arlazarov, C.R. Hutchinson*, "Thermal and athermal contributions to the flow stress of martensite." Materialia. 11 (2020) 100719.
12. Y.X. Wu, W.W. Sun , X. Gao, M.J. Styles, A. Arlazarov, C.R. Hutchinson*, "The effect of alloying elements on cementite coarsening during martensite tempering." Acta Materialia, 183(2020): 418–437.
13. H. Zhang*, T. Hu, W.W. Sun , M.M. Hu, R.F. Cheng, X.H. Wang*. "Atomic Repartition in MXene by Electron Probe." Chemistry of Materials, 31 (2019): 4385-4391.
14. Y.X. Wu, W.W. Sun , M.J. Styles, A. Arlazarov, C.R. Hutchinson*, "Cementite coarsening during the tempering of Fe-C-Mn martensite." Acta Materialia, 159 (2018), 209-224.
15. Dinh. T. Vu, W.W. Sun , Y. Yue, Y. Wu, C.R. Hutchinson, S. Thomas*. "On the miniaturised sacrificial protection achieved by surface precipitation in aluminium alloys." Corrosion Science, 145 (2018): 67-79. (金属材料腐蚀顶级期刊)
16. M.J. Styles, W.W. Sun , D. R. East, J. A. Kimpton, M. A. Gibson, and C. R. Hutchinson*. On the competition in phase formation during the crystallisation of Al-Ni-Y metallic glasses. Acta Materialia 117 (2016): 170-187.