近期论文
查看导师最新文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
L.J. Huang, Q. An, L. Geng, S. Wang, S. Jiang, X.P. Cui, R. Zhang, F.B. Sun, Y. Jiao, X. Chen, C.Y. Wang, Multi-scale architecture and superior high-temperature performances of discontinuously reinforced titanium matrix composites. Advanced Materials 33 (2021) 2000688.
Q. An, L. Huang, Q. Qian, Y. Jiang, S. Wang, R. Zhang, L. Geng, L, Wang, Insights into in-situ TiB/dual-phase Ti alloy interface and its high load-bearing capacity, Journal of Materials Science & Technology 119 (2022) 156-166.
Q. An, S. Wang, L.J. Huang, C.Y. Wang, Q. Qian, Y. Jiang, L.Q. Wang, L. Geng, Experimental and first-principles study on TiB/TiC interface in hybrid (TiB+TiC)/Ti6Al4V composite, Ceramics International 48 (2022) 22595-22600.
Q. An, L. Huang, S. Jiang, S. Wang, R. Zhang, F. Sun, A. Moridi, L. Geng, Wear rate of titanium matrix composite coating at high temperature further increased by non-stoichiometric TixC oxidation. Ceramics International 46 (2020) 8068-8074.
Q. An, A. Elshafiey, L.J. Huang, D.A. Hammer, M. Hassani, Plasma and X-ray radiation-induced damage mechanisms in a tungsten heavy alloy. Journal of Nuclear Materials, 539 (2020) 152325.
Q. An, L. Huang, S. Wei, R. Zhang, X. Rong, Y. Wang, L. Geng, Enhanced interfacial bonding and superior oxidation resistance of CoCrAlY-TiB2 composite coating fabricated by air plasma spraying, Corrosion Science 158 (2019) 108102.
Q. An, L.J. Huang, Y. Jiao, Y. Bao, B. Zhong, L. Geng, Intergrowth microstructure and superior wear resistance of (TiB+TiC)/Ti64 hybrid coatings by gas tungsten arc cladding. Materials & Design 162 (2019) 34-44.
Q. An, L.J. Huang, S. Jiang, Y. Bao, M. Ji, R. Zhang, L. Geng, Two-scale TiB/Ti64 composite coating fabricated by two-step process. Journal of Alloys and Compounds 755 (2018) 29-40.
Q. An, L.J. Huang, Y. Bao, R. Zhang, S. Jiang, L. Geng, M.M. Xiao, Dry sliding wear characteristics of in-situ TiBw/Ti6Al4V composites with different network parameters. Tribology International 121 (2018) 252-259.
Q. An, L.J. Huang, S. Jiang, X.T. Li, Y.N. Gao, Y. Liu, L. Geng, Microstructure evolution and mechanical properties of TIG cladded TiB reinforced composite coating on Ti-6Al-4V alloy. Vacuum 145 (2017) 312-319.
安琦, 袁新建, 张文龙, 臧若锦, 喷丸预处理对铝合金与钢TIG熔-钎焊的影响, 材料科学与工艺 23(6) (2015) 77-81.
X.T. Li1, Q. An1,*, L.J. Huang, R. Zhang, X. Chen, R. Chen, F.B. Sun, L. Geng, The hot corrosion behaviors and mechanisms of hot-dipped Ti-Al-Si coatings on TiBw/Ti6Al4V composite against NaCl and Na2SO4, Journal of Alloys and Compounds, 921 (2022) 166151. （共同一作、通讯）
W. Lu, Q. An*, C. Wang, S. Wang, L. Huang, F. Sun, R. Chen, L. Geng, Sub-micron grains and excellent mechanical properties of low-density Ti40Nb30Mo30-C refractory complex concentrated alloy reinforced with in-situ (Ti, Nb)C, Materials Science and Engineering A, 860 (2022) 144335. （通讯）
R. Chen, Q. An*, S. Wang, L. Huang*, R. Zhang, C. Wang, S. Zhou, L. Geng, Overcoming the strength-ductility trade-off dilemma in TiBw/TC18 composites via network architecture with trace reinforcement, Materials Science and Engineering A, 842 (2022) 143092. （通讯）
S. Wang, Q. An*, R. Zhang, S. Jiang, L. Huang*, R. Chen, B. Liu, Y. Jiao, L. Geng, Microstructure characteristics and enhanced properties of network-structured TiB/(TA15-Si) composites via rolling deformation at different temperatures, Materials Science and Engineering A, 829 (2022) 142176. （通讯）
C. Wang, Q. An*, L. Huang*, R. Zhang, X. Chen, R. Chen, L. Geng, H.X. Peng, Achieving superior strength-ductility synergy by constructing network microstructure in Ti-based high-entropy alloy matrix composites, Composites Communications, 36 (2022) 101357. （通讯）
Z. Ren, W. Liu, Q. An*, X. Chen, G. Wei, R. Chen, R. Zhang, L. Huang*, L. Geng, Microstructures and tensile properties of low-cost TiBw/Ti-6Al-4V composites by vacuum reactive hot pressing, Vacuum, 211 (2023) 111921. （通讯）
S. Wang, L. Huang*, R. Zhang, Q. An*, F. Sun, F. Meng, L. Geng, Effects of rolling deformation on microstructure orientations and tensile properties of TiB/(TA15-Si) composites, Materials Characterization, 194 (2022) 112425. （通讯）
J. Song, L. Huang*, G. Yang, G. Cong, X. Zhang, Z. Liu, Q. An*, L. Geng, Solid-state approach for synthesizing single crystal LiNi0.8Co0.1Mn0.1O2 cathode of lithium-ion batteries, Journal of Alloys and Compounds, 946 (2023) 169358. （通讯）
陈润, 安琦*, 张芮, 刘悦, 王帅, 黄陆军, 耿林, 热轧制对网状(TiBw+(TiZr)5Si3)/TA15复合材料组织及性能的影响, 精密成形工程 13(3) (2021) 1-8.（通讯）
S. Wang, Q. An, W. Liu, R. Zhang, Z. Ma, L. Huang, L. Geng, Towards strength-ductility enhancement of titanium matrix composites through heterogeneous grain structured Ti matrix design, Journal of Alloys and Compounds, 927 (2022) 167022.
X. Chen, Q. An, S. Jiang, Y. Jiao, L. Huang, L. Geng, Revealing anti-oxidation mechanisms of titanium composite materials by detailed characterization of scale phase constitutions, Corrosion Science 192 (2021) 109845.
S. Jiang, Q. An, X. Cui, X. Xiang, L. Huang, R. Zhang, Y. Sun, L. Geng, Fabrication and mechanical properties of the titanium matrix composites based on Ti6Al4V-ZrB2-(Si) system, Materials Science and Engineering A 819 (2021) 141488.
S. Wang, Q. An, R. Zhang, X. Cui, L. Huang, L. Geng, Strain rate sensitivity of titanium matrix composites: In the presence of laminated structure, Composites Communications 26 (2021) 100787.
S. Wang, L. Huang, Q. An, Z. Ma, R. Zhang, H.-X. Peng, L. Geng, Strength-ductility synergy of in-situ TiB/Ti6Al4V composites with tailored hierarchical TiB distributions, Ceramics International 48 (2022) 35069–35075.
陈润, 王帅, 安琦, 张芮, 刘文齐, 黄陆军, 耿林, 热挤压与热处理对网状TiBw/TC18复合材料组织及性能的影响, 金属学报, 58 (2022) 1478-1488.
M. Ji, L. Huang, Q. An, Y. Bao, X. Cui, Y. Jiao, L. Geng, Microstructure refinement and strengthening mechanisms of network structured TiBw/Ti6Al4V composites by TIG remelting, Materials Science and Engineering A 804 (2021) 140755.
Y. Bao, L. Huang, Q. An, S. Jiang, R. Zhang, L. Geng, X. Ma, Insights into arc-assisted self-propagating high temperature synthesis of TiB2-TiC ceramic coating via wire-arc deposition, Journal of the European Ceramic Society 40(13) (2020) 4381-4395.
黄陆军, 孙枫泊, 安琦, 韩亚坤, 刘悦, 崔喜平, 耿林, (TiBw+(TiZr)5Si3)/TA15钛基复合材料粉末冶金制备与热处理改性, 中国科学: 技术科学, 50(7) (2020) 935-946.
R. Zhang, L. Huang, Q. An, L. Geng, B. Wang, Y. Jiao, The hyperbolic constitutive equations and modified dynamic material model of TiBw/Ti-6.5Al-2.5Zr-1Mo-1V-0.5Si composites, Materials Science and Engineering A 766 (2019) 138329.
Y. Bao, L. Huang, Q. An, S. Jiang, R. Zhang, L. Geng, X. Ma, Metal transfer and microstructure evolution during wire-feed deposition of TiB/Ti composite coating, Journal Materials Processing Technology 274 (2019) 116298.
S. Wang, L. Huang, Q. An, S. Jiang, R. Zhang, L. Geng, S. Qu, H. Peng, Regulating crack propagation in laminated metal matrix composites through architectural control, Composites Part B 178 (2019) 107503.
R. Zhang, L. Huang, Q. An, L. Geng, B. Wang, Y. Jiao, The hyperbolic constitutive equations and modified dynamic material model of TiBw/Ti-6.5Al-2.5Zr-1Mo-1V-0.5Si composites, Materials Science and Engineering A 766 (2019) 138329.
S. Wang, L.J. Huang, Q. An, L. Geng, B.X. Liu, Dramatically enhanced impact toughness of two-scale laminate-network structured composites. Materials & Design 140 (2018) 163-171.
L.J. Huang, T.B. Duan, Q. An, Y.Y. Chen, J.Y. Bai, L. Geng, S.B. Lin, Gas Tungsten Arc Welding of Network Structured Titanium Matrix Composite. Science and Technology of Welding and Joining 23(5) (2018) 357-364.
Y. Bao, L. Huang, Q. An, S. Jiang, L. Geng, X. Ma, Wire-feed deposition TiB reinforced Ti composite coating: Formation mechanism and tribological properties, Materials Letters 229 (2018) 221-224.
Y. Jiao, L.J. Huang, Q. An, S. Jiang, Y.N. Gao, X.P. Cui, L. Geng, Effects of Ti5Si3 characteristics adjustment on microstructure and tensile properties of in-situ (Ti5Si3+TiBw)/Ti6Al4V composites with two-scale network architecture. Materials Science and Engineering A 673 (2016) 595-605.
S. Jiang, L.J. Huang, Q. An, L. Geng, X.J. Wang, S. Wang, Study on titanium-magnesium composites with bicontinuous structure fabricated by powder metallurgy and ultrasonic infiltration. Journal of the Mechanical Behavior of Biomedical Materials 81 (2018) 10-15.
Y.N. Gao, L.J. Huang, Q. An, Y. Bao, X.T. Li, J. Zhang, L. Geng, Microstructure evolution and mechanical properties of titanium matrix composites and Ni-based superalloy joints with Cu interlayer. Journal of Alloys and Compounds 764 (2018) 665-673.
京公网安备 11010802027423号