近期论文
查看导师最新文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
Laishan Yang, Jing Yang, Fang Han, Zhihang Zhang, Qinghua Li, Zhibo Dong*, Lei Wang, Nana Ofori-Opoku, Nikolas Provatas*. Hot cracking susceptibility prediction from quantitative multi-phase field simulations with grain boundary effects. Acta Materialia,2023, 250:118821, https://doi.org /10.1016/j.actamat.2023.118821.
Qinghua Li, Chengcheng Wang, （Bo Liu）, （Laishan Yang）, （Rui Ma）, Fang Han ,Zhihang Zhang, Chengkun Li, Han Wang, Zhibo Dong*.The effect of nanopores on the mechanism of martensitic transformation in pure iron during the heating-cooling cycle: A molecular dynamics study. Materials Today Communications,2023，37： 107481
Laishan Yang, Zhibo Dong*, Lei Wang, Nikolas Provatas*. Improved multi-order parameter and multi-component model of polycrystalline solidification. Journal of Materials Science & Technology，2022，(101):217-225.
Qinghua Li, Zhibo Dong*, Shouzhen Zhou, Fang Han, Chengkun Li, Hao Chang,and Zhipeng Zhang.Investigation of Grain Boundary Content on Crack Propagation Behavior of Nanocrystalline Al by Molecular Dynamics Simulation . Phys. Status Solidi B, 2022 ,259(1): 2100570.
Zhibo Dong*, Ziao Zhang, Wei Hu*, Peng Gong, Zan Lv. Microstructure and mechanical properties of friction stir lap welded dissimilar Al/Ti alloys by ultrasonic assistance. Arch. Metall. Mater.2022, 67(1): 91-96.
Fangfang Liu, Shouzhen Zhou, Zhibo Dong*, Fang Han.The Prediction of Ferrite Ratio in HAZ of EH36 Steel Electro-gas Welding Joints Based on Leblond Equation. Steel research International, 2022,DOI: 10.1002/srin.202200258.
李承昆,董志波,王瀚,韩放,滕俊飞,吕彦龙. 密排阵列孔柱层板冷却结构服役寿命预测分析. 焊接学报, 2022, 43(11):101-106.
Fangfang Liu，Congcong Tao，Zhibo Dong*，Shouzhen Zhou.Prediction of welding residual stress and deformation in Electro-gas welding using artificial neural network.Materials Today Communications. 2021,29:102786
Junli Guo, Zhibo Dong*, Hongyuan Fang. Strength Calculation and Equal Load-Carrying-Capacity Design of an Undermatched HSLA Lap Joint under Out-of-Plane Bending. Metals,2021, 11(1):1-15
Qinghua Li, Zhibo Dong*,Shude Ji, Laishan Yang. Effects of Welding Parameter on Atom-Scale Interfacial Diffusion Behavior of Al/Cu Dissimilar Friction Stir Welding. Phys. Status Solidi B, 2021, 2100123
董志波*,卢伟泽,相靓宇,方洪渊. 低匹配对接接头的抗冲击等承载设计方法. 中国机械工程, 2021, 32(6):729-733
许谦,胡广旭,董志波*,任新星,方洪渊.基于相变与收缩耦合的1Cr12 焊缝冷却动态力学行为研究. 中国机械工程,2021,32(3):341-347
刘安, 胡广旭, 董志波. 铝合金搅拌摩擦焊热源模型建模专家系统. 电焊机, 2021,51(02): 10-16
Junli Guo, Zhibo Dong* and Hongyuan Fang. Equal Load Carrying Capacity Design of Butt Joints Based on Plastic Limit Loads,2020,doi:10.1088/1757-899X/774/1/012008
董志波*, 周守振, 武继胜, 方洪渊. 基于轮廓法与固有应变理论焊接纵向残余应力的三维重构. 中国科学: 技术科学, 2020,50(7):957-963
许谦, 胡广旭,董志波*,许红祥,方洪渊. QTT 天线轨道重力弯矩下多层多道焊角变形预测.焊接学报, 2020, 41(8): 10-13
Qi Wen,Ruixiu Guo,Qi Song,Zhibo Dong*.Active-passive filling friction stir repairing of casting defects in ZL210 aluminum alloys.The International Journal of Advanced Manufacturing Technology, 2020, 106:5307–5315
Qi Wen, Dengchang Li, Shude Ji,Zhibo Don*g.Improving Interfacial Microstructures and Tensile Properties of Active–Passive Filling Friction Stir Repaired ZL210 Aluminum Alloys by Optimizing Shoulder Morphologies.Trans Indian Inst Met,2020, 73(9):2181– 2190
Zan Lv, Song Han, Wei Hu, Zhibo Dong*.Solid-State Repair of Casting Defects in ZL210 Aluminum Alloy. JMEPEG, 2020, 29:5886–5893
Mengjia Xu, Bosheng Liu, Zhibo Dong* and Zhenmin Wang. Influence of Microstructure Evolution on Reheat Cracking Behavior of T23 Steel Weld Joint. ISIJ International, 2020, 60(6):1291–1300
Chen GQ , Liu JP,Dong ZB*. Underlying reasons of poor mechanical performance of thick plate aluminum-copper alloy vacuum electron beam welded joints.VACUUM, 2020,182,DOI:10.1016/j.vacuum. 2020:100667
宋奎晶,董志波,李洋,等. 铝合金搅拌摩擦焊液冷流道承压力学模型. 电子机械工程, 2020, 36(2): 30-33
宋奎晶,董志波,李洋,等. 铝合金搅拌摩擦焊液冷流道承压力学模型. 电子机械工程, 2020, 36(21): 46-50
董曼淑,刘龙,董志波. 重型复杂结构件过渡槽焊接变形工艺研究. 机械制造文摘—焊接分册, 2020, 34-39
Mengjia Xu, Bosheng Liu, Yunqiang Zhao, Zhenmin Wang & Zhibo Dong. Direct joining of thermoplastic ABS to aluminium alloy 6061-T6 using friction lap welding. Science and Technology of Welding and Joining, 2020, 25(5):391–397
Chun Li, Xiaoqing Si, Shiwei Bian, Zhibo Dong, Yongxian Huang, Junlei Q , Jicai Feng, Jian Cao.Diffusion bonding of Ti and Zr at ultra-low temperature via surface nano-crystallization treatment. Materials Science & Engineering A, 2020, 785:139413
Yuming Xie, Yongxian Huang, Feifan Wang, Xiangchen Meng, Junchen Li, Zhibo Dong, Jian Cao. Deformation-driven metallurgy of SiC nanoparticle reinforced aluminum matrix nanocomposites. Journal of Alloys and Compounds, 2020, 823:153741
Yuming Xie, Yongxian Huang, Xiangchen Meng, Feifan Wang, Long Wan, Zhibo Dong, Jian Cao. Friction rivet joining towards high-performance wood-metal hybrid structures.Composite Structures, 2020, 247:112472
Zhibo Dong*, Qi Song, Xinxin Ai, Zan Lv.Effect of joining time on intermetallic compound thickness and mechanical properties of refill friction stir spot welded dissimilar Al/Mg alloys.Journal of Manufacturing Processes,2019,42:106-112
Zhibo Dong*,Kang Yang, Rong Ren, Guoqiang Wang, Lei Wang, Zan Lv. Friction Stir Lap Welding 0.8-mm-Thick 2024 Aluminum Alloy with the Assistance of Stationary Shoulder.Journal of Materials Engineering and Performance,2019,28(11):6704–6713
Zhibo Dong*,Wei Hu,Xinxin Ai, Zan Lv.Effect of Rotation Speed on Intermetallic Compounds and Failure Load of RFSSW-ed Dissimilar Al/Mg.Trans Indian Inst Met, 2019,72(9):2249-2256
郭军礼, 董志波*, 刘雪松,王 苹, 方洪渊. 基于等承载思想的低匹配T 型接头设计.机械工程学报,2019,55(06):1-10
Xue Wen, Ping Wang,Zhibo Dong, Hongyuan Fang.A Novel Method for Assessing Material Heterogeneity-Induced Interfacial Stress Singularities of Dissimilar Joints Under Normal Loading. JOM,2019, 71(12): 4891-4898
Xue Wen, Ping Wang,Zhibo Dong, Hongyuan Fang.A Fracture Mechanics-Based Optimal Fatigue Design Method of Under-Matched HSLA Steel Butt-Welded Joints with Imperfections. Applied Sciences,2019, 9(17): 3609
Xiangchen Meng, Yongxian Huang, Yuming Xie, Junchen Li, Meng Guan, Long Wan,Zhibo Dong, Jian Cao. Friction self-riveting welding between polymer matrix composites and metals. Composites Part A: Applied Science and Manufacturing, 2019, 127(12):105624
Chun Li, Xiaoqing Si, Jian Cao, Junlei Qi, Zhibo Dong. Jicai Feng. Residual stress distribution as a function of depth in graphite/copper brazing joints via X-ray diffraction. Journal of Materials Science & Technology, 2019, (35):11:2470-2476
Chun Li, Xiaoqing Si, Lei Chen, Junlei Qi, Zhanguo Liu, Yongxian Huang, Zhibo Dong, Jicai Feng, Jian Cao. Non-destructive measurement of residual stress distribution as a function of depth in sapphire/Ti6Al4V brazing joint via Raman spectra. Ceramics International, 2019, 45(3): 3284-3289
Qiang Wang, Zhongjie Yan, Xuesong Liu, Zhibo Dong, Hongyuan Fang.Understanding of fatigue crack growth behavior in welded joint of a new generation Ni-Cr-Mo-V high strength steel. Engineering Fracture Mechanics 2018, 194(1): 224-239
Wen, X, Wang, P, Dong, Z, Liu, Y, Fang, H. Nominal Stress-Based Equal-Fatigue-Bearing-Capacity Design of under-matched HSLA Steel Butt-welded Joints .Metals, 2018, 8:880
Wen, X., Wang, P., Dong, Z., Fang, H. Dong.Nominal stress based equal fatigue bearing capacity design of HSLA steel V-shaped butt-welded joints. In MATEC Web of Conferences. 2018, 221:01009(EDP Sciences)
董志波*, 郭军礼, 杨来山.焊接过程宏微观数值模拟与仿真的研究现状.精密成形工程, 2018, 10(1):40-51
付吉远, 董志波. LD10管管对接摩擦焊的工艺设计.吉林建筑大学学报, 2018,35(5):31-35
杨建国, 董志波, 郑文健, 贺艳明. 对线性不稳定动力学的影响焊接熔池凝固过程联生结晶晶体学取向. 机械工程学报,2018,54(2):62-69
Qiang Wang, Xuesong Liu, Zhongjie Yan, Zhibo Dong.On the mechanism of residual stresses relaxation in welded joints under cyclic loading. International Journal of Fatigue, 2017, 105: 43-59
Qiang Wang, Xuesong Liu, Zhongjie Yan, Zhibo Dong. Non-saturated cyclic softening and uniaxial ratcheting of a high-strength steel: Experiments and viscoplastic constitutive modeling.Mechanics of Materials, 2017, 113: 112-125
Qiang Wang, Xuesong Liu, Zhongjie Yan, Zhibo Dong. Mixed mode fatigue crack growth behavior of Ni-Cr-Mo-V high strength steel weldments. International Journal of Fatigue, 2017, 102: 79-9
Wang Q,Liu X S,Wang P, Dong ZB FangH Y. Numerical simulation of residual stress in 10Ni5CrMoV steelweldments. Journal of Materials Processing Technology，2017, 240: 77-86
Wang Q, Liu X S, Wang P, Dong ZB, Fang H Y. A combined computational and experimental study on vibration stress relief for large welded DH36 steel tube. Journal of Vibroengineering，2016，18(3):1486-1496
王佳杰, 方洪渊, 张敬强, 董志波, 刘雪松. 弹性状态低匹配焊接接头弯曲等承载设计准则与设计方法. 焊接学报，2016,37(7):53-56
K.J. Song, Y.H. Wei, Z.B. Dong.Constitutive model coupled with mechanical effect of volume change and transformation induced plasticity during solid phase transformation for TA15 alloy welding. Applied Mathematical Modelling, 2015, 39(7): 2064-2080
K.J. Song, Y.H. Wei, Z.B. Dong. Cellular Automaton Modeling of Diffusion, Mixed and Interface Controlled Phase Transformation.Journal of Phase Equilibria and Diffusion, 2015, 36(2):136-148
K.J. Song, Y.H. Wei, K. Fang Z.B. Dong.Cellular automaton-based study of factors that affect dynamic solid phase transformation kinetics. Applied Mathematical Modelling, 2015, 39(17):5058-5072
董志波, 刘雪松, 马瑞, 刘建光, 王苹. 《MSC.Marc 工程实例详解》. 人民邮电出版社, 2014
Zhibo Dong*, Wenjian Zheng. Dynamic evolution of initial instability during non-steady-state growth. Physical Review E, 2014, 89(6):062403
W.J. Zheng, Z.B. Dong*, Y.H. Wei. Phase field investigation of dendrite growth in the welding pool of aluminum alloy 2A14 under transient conditions. Computational Materials Science, 2014, (82):525–530
W.J. Zheng, Z.B. Dong*, Y.H. Wei.Onset of the initial instability during the solidification of welding pool of aluminum alloy under transient conditions. Journal of Crystal Growth, 2014, 402: 203-209
W.J. Zheng, Z.B. Dong*, Y.H. Wei. Phase field investigation on sidebranching dynamics in transient growth. Crystal Research and Technology,2014, 49 (10):777-784
K.J. Song, Z.B. Dong*, Y.H. Wei. Cellular automaton modelling of dynamic recrystallisation microstructure evolution during friction stir welding of titanium alloy. Materials Science and Technology,2014, 30(6):700-711
K.J. Song, Y.H. Wei, Z.B. Dong.Virtual front tracking cellular automaton modeling of isothermal β to α phase transformation with crystallography preferred orientation of TA15 alloy. Modelling and Simulation in Materials Science and Engineering,2014, 22(1): 015006
K.J. Song, Y.H. Wei, Z.B. Dong. Visco-Elastic-Plastic Constitutive Model for A7N01-T6 Alloy Welding and Analytical Solutions with Finite Element Codes. Applied Mechanics and Materials,2014, 446-447:284-287
宋奎晶, 魏艳红, 董志波, 马瑞. 焊接热循环和变形历史相关的A7N01-T6本构关系. 焊接学报, 2014, 35(4):87-94
宋奎晶, 魏艳红, 马瑞, 董志波.TA15钛合金焊接热影响区组织演变的数值模拟.焊接学报, 2014, 35(2):28-32
王佳杰, 董志波*, 方洪渊. 低匹配对接接头形状参数对三点弯曲应力集中系数的影响. 焊接学报, 2013, 34(1):73-76
K.J. Song, Y.H. Wei, Z.B. Dong. Numerical simulation of b to a phase transformation in heat affected zone during welding of TA15 alloy. Computational Materials Science, 2013, (72):93-100
占小红, 陈洁, 董志波. 铝合金T 型接头双激光束双侧同步焊接温度场模拟. 沈阳工业大学学报, 2013,35(3):279-284
杨建国, 王佳杰, 董志波. 随焊冲击碾压整形对低匹配等承载接头硬度与残余应力的影响. 焊接学报, 2013, 34(3):37-40
Dong Zhibo*, Wei Yanhong. Welding sequence optimization of TA15 airplane wall panels. Materials Science Forum, 2012, 704-705(11):1045-1450
Jiajie Wang, Z.B. Dong, Hongyuan Fang. Cold bending properties of Under-Matched butt joints for high strength steel. Advanced Materials Research, 2012, 557:1308- 1312
王佳杰, 董志波, 方洪渊. 弹性阶段低匹配对接接头三点弯曲余高形状设计.焊接学报, 2012, 33(8):37-40
Wei Yanhong, Hu Guangxu, Dong Zhibo. A customized system for simulation of welding thermal process.China Welding, 2012, 21(3):61-66
魏艳红, 胡广旭, 董志波. 曲线路径动态焊接热源建模. 沈阳工业大学学报, 2012,34(4): 385-390
王佳杰, 杨建国, 张敬强, 董志波, 方洪渊. 随焊冲击碾压整形新方法及等承载接头拉伸与疲劳性能. 焊接学报, 2012, 33(11):35-38
Dong Zhibo*. Solute Redistribution with Shear Flow in Molten Pool of Ni-Cr Alloy. Journal of Materials Science & Technology, 2011, 27(23): 183-188
Y. H. Wei, Z. B. Dong*. Stress distributions of welding joints in titanium–steel composite pressure vessel under working conditions. Science and Technology of Welding and Joining, 2011, 16(8):709-716
Hu Guanxu, Dong zhibo, Wei Yanhong. Investigation on automated loading of dynamic 3D heat source during welding simulation. China Welding, 2011, 20(2):41-45
董志波*, 马瑞, 王勇, 魏艳红. 焊接凝固裂纹数值模拟与预测系统后处理设计. 焊接学报, 2011, 32(3):27-31
Wei Yan-Hong, Zhan Xiao-Hong, Dong Zhi-Bo. Development and application of software packages in welding engineering.Frontiers of Materials Science, 2011:1-8
魏艳红, 王勇, 董志波. 纯金属TIG焊熔池等轴晶生长的相场法模拟. 焊接学报, 2011, 32(3):1-4
Dong Zhibo*, Xu Yanli, Wei Yanhong, Ma Rui, Wang Shujuan and Zhai Guofu. Three-dimensional turbulent model of heat transfer and fluid flow in GTAW process. China Welding, 2010, 19(2): 23-27
董志波*, 马瑞, 王勇. 镍基合金焊接熔池凝固组织模拟. 焊接学报, 2010, 31(10):27-31
胡广旭, 董志波, 魏艳红.典型飞机构件焊接数值模拟系统研制. 焊接学报, 2010, 31(6):105-108
马瑞, 董志波, 魏艳红. 镍基合金焊缝凝固组织演变过程模拟和仿真. 焊接学报, 2010, 31(7):43- 46
闫久春, 王浪平, 方洪渊, 董志波. 加强工程实践能力的培养 推广“国际焊接工程师”培训教学的实践体会. 焊接, 2010, (1):8-10
Z.B.Dong* and Y.H.Wei. Expert system for evaluating the safety of pressure vessels. China Welding, 2009, 18(2): 21-24
董志波*, 占小红, 魏艳红. 焊接凝固裂纹三维数值模拟与预测系统的前处理设计. 焊接学报, 2009, 30(8):21-25
Zhan XH, Dong ZB, Wei YH. Simulation of grain morphologies and competitive growth in weld pool of Ni-Cr alloy. Journal of Crystal Growth, 2009, 311(23-24):4778- 4783
Ma R, Dong ZB*, Wei YH. Columnar grain growth pattern with fluid flowing in molten pool. Crystal Research and Technology, 2009, 44(11): 1197-1204
Xiaohong Zhan, Zhibo Dong and Yanhong Wei. Stochastic modeling of columnar dendritic grain growth in weld pool of Al-Cu alloy. Crystal Research and Technology, 2009, 44(4):414-420
占小红, 董志波, 魏艳红. Ni-Cr二元合金焊接熔池柱状枝晶生长模拟. 中国有色金属学报, 2009, 19(8):1431-1436
王敏, 董志波*, 魏艳红, 高巍. 基于人工神经网络的钛合金焊接接头机械性能预测. 航空制造技术, 2009, (16):79-82
董志波*, 马瑞, 魏艳红, 乔红来. 基于企业局域网络共享的焊接工艺设计专家系统. 焊接, 2009, s1: 146-148
魏艳红, 占小红, 董志波, 马瑞, 王勇. 基于CA模拟焊缝凝固过程枝晶生长的分析. 焊接学报, 2009, 30(3):13-16
Yanhong Wei, Yanli Xu, Zhibo Dong, Xiaohong Zhan. Three-dimensional Monte Carlo simulation of discontinuous grain growth in HAZ of stainless steel during GTAW process. Journal of Materials Processing Technology, 2009, 209(3):1466-1470
魏艳红, 徐艳利, 孙燕洁, 董志波. A-TIG焊接熔深增加机理. 焊接学报, 2009, 30(2):37-40
X.H. Zhan, Z.B. Dong, Y.H. Wei and Y.L. Xu. Dendritic Grain Growth Simulation in Weld Molten Pool Based on CA-FD Model. Cryst. Res. Technol.2008, 43(3): 253-259
Wang Min, Dong Zhibo*, Yu lan and Wei yanhong. Numerical simulation of temperature fields for T-joint during TIG welding of titanium alloy, China Welding, 2008, 17(3):6-9
Zhan XH, Wei YH, Dong ZB. Cellular automaton simulation of grain growth with different orientation angles during solidification process. Journal of Materials Processing Technology, 2008, 208(1-3):1-82
Xiaohong Zhan, Yanhong Wei, Zhibo Dong. Dendritic Grain Growth Simulation in Molten Pool of Nickel Base Alloy Weld. China Welding. 2008,17(1): 6-11.
占小红，魏艳红，马瑞，董志波. Al-Cu合金凝固枝晶生长的数值模拟. 中国有色金属学报, 2008,18(4):710-716
董志波*，魏艳红. 遗传算法与神经网络结合优化焊接接头力学性能预测模型. 焊接学报, 2007, 28(12):69-73
Yanli Xu, Zhibo Dong and Yanhong Wei. Marangoni convection and weld shape variation in A-TIG welding process. Theoretical and Applied Fracture Mechanics, 2007, 48(2):178-186
Y. H. Wei, X. H. Zhan, Z. B. Dong and L. Yu. Numerical simulation of columnar dendritic grain growth during weld solidification process. Science and Technology of Welding and Joining, 2007, 12(2): 138-146
Yanhong WEI, Yanli XU, Zhibo DONG and Jilin XIAO. Three Dimensional Monte Carlo Simulation of Grain Growth in HAZ of Stainless Steel SUS316. Key Engineering Materials, 2007, 353-358:1923-1926
Z.B.Dong* and Y.H.Wei. Three dimensional modeling welding solidification cracks in multipass welding. Theoretical and Applied Fracture Mechanics, 2006, 46:156-165
Z.B.Dong* and Y.H.Wei. Predicting weld solidification cracks in multipass welds of SUS310 stainless steel. Computational Materials Science, 2006, 38:459-466
Y.H.Wei and Z.B.Dong*. Modeling the Trans-Varestraint Test with Finite Element Method. Computational Materials Science, 2006,35:84-91
董志波*, 魏艳红.不锈钢焊接凝固裂纹的数值模拟. 材料科学与工艺, 2006, 14(4):353-357
徐艳利, 魏艳红, 董志波. 焊接接头组织模拟进展. 材料科学与工艺, 2006, 14(2):181-185
徐艳利, 魏艳红, 董志波. 不同软件模拟不锈钢GTAW温度场结果的比较. 焊接学报, 2006, 27(1):9-16
Z.B.Dong* and Y.H.Wei. Three Dimensional Numerical Simulation of the Driving Force to Solidification Cracking. Journal of Materials Science & Technology, 2005, 21(3):399- 402
Z.B.Dong* and Y.H.Wei. Simulating Weld Hot Crack of T-type Joints of Aluminum Plates with ANN. Transactions of Nonferrous Metals Society of China, 2005, 14(4): 25- 30
Y.H.Wei and Z.B.Dong*. Three Dimensional Numerical Simulation of Weld Solidification Cracking. Modeling and Simulation in Materials Science and Engineering, 2005, 13(3): 437-454
董志波*, 魏艳红. 厚板不锈钢焊接凝固裂纹驱动力的三维数值模拟. 金属学报, 2005, 41(2):214- 218
董志波*, 魏艳红. 有限元法修正可调拘束实验测量的焊接凝固裂纹阻力曲线. 金属学报, 2005, 41(7): 780-784
董志波*, 魏艳红. 焊接凝固裂纹数值模拟的研究及其进展. 焊接, 2005, (11):19-23
Z.B.Dong*,Y.H.Wei. Three Dimensional Numerical Simulation of Welding Temperature Fields in Stainless Steel. China Welding, 2004, 13(1): 11-16
董志波, 魏艳红. 不锈钢焊接温度场的三维数值模拟.焊接学报, 2004,25(2):93-98
魏艳红, 董志波. 焊接凝固裂纹的数值模拟与预测. 机械工程学报, 2004,40(7):93-98
方洪渊,董志波,徐文立. 随焊锤击防止薄板焊接热裂纹的工艺研究.焊接,2002, (3):17-20
会议论文
董志波, 郑文健, 魏艳红. 铝合金焊接熔池凝固组织演变过程的定量相场研究. 第十八次全国焊接学术会议, 2013年10月,江西南昌
Zhibo Dong, Zheng Wenjian and Yanhong. Phase Field Simulation of Solidification Microstructure Growth in Electron Beam welding pool. the 65th Annual Assembly & International Conference of the International Institute of Welding. Denver, Colorado, USA, July 7-15 2012
Zhibo Dong, Zheng Wenjian and Yanhong. Phase field simulation during directional solidification of welding pool in a binary alloy. 2nd International Symposium on Computer-Aided Welding Engineering, Jinan, China, 23-26 Aug, 2012
董志波, 马瑞, 魏艳红, 乔红来. 基于企业局域网络共享的焊接工艺设计专家系统. 第五届全国计算机在焊接中的应用学术与技术交流会. 2008年10月29日-11月3日. 广西南宁: 143-147
董志波, 王敏, 魏艳红. 钛合金飞机壁板不同焊接顺序条件下应力与变形的数值模拟. 第五届全国计算机在焊接中的应用学术与技术交流会. 2008 年10月29日-11月3日. 广西南宁: 295-298
董志波, 王敏, 魏艳红. TA15钛合金飞机壁板TIG焊接顺序优化的研究. 第十二届中国体视学与图像分析学术会议论文集, 2008
董志波, 王敏, 于澜. TA15钛合金飞机壁板TIG焊接残余应力和变形的数值模拟. 计算机与现代焊接技术交流会山东大学威海国际学术中心. 2007年8月24-26日
Zhibo Dong, Yanhong Wei and Yanli Xu. Software system for three-dimensional modeling of weld solidification cracks, Proceedings of international symposium on computer-aided welding engineering. October 19-22, 2006, Jinan, China, p330-335
京公网安备 11010802027423号