近期论文
查看导师最新文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
Liu Z, Fan CL*, Yang C, et al. Investigation of the weldability of dissimilar joint between high nitrogen steel and low alloy steel by comparing filler metals. Material Today Communications. 2023, 35.
Chen Yi, Fan Chenglei, Lin Sanbao, et al. Effect of Tungsten Inert Gas Welding Parameters on Hot Crack Sensitivity of Cast Magnesiuym Alloy. Joural of Materials Engineering and Performance. 2023, 32:1382-1389.
Yimin Zhuo, Chunli Yang, Chenglei Fan*, Sanbao Lin. Effects of Trace Boron Addition and Different Arc Types on Microstructure and Mechanical Properties of TC11/TC17 Dual Alloy Fabricated by Wire Arc Additive Manufacturing. Advanced Engineering Materials. 2022, 5, 2200126. (IF=3.862).
Yimin Zhuo, Chunli Yang, Chenglei Fan*, Sanbao Lin. Effects of thermal undercooling and thermal cycles on the grain and microstructure evolution of TC17 titanium alloy repaired by wire arc additive manufacturing. The International Journal of Advanced Manufacturing Technology. 2022, 1. (IF=3.32).
Chen Y, Yang C, Fan C*, et al. Microstructure evolution and mechanical properties of a nickel-based superalloy repaired using wire and arc additive manufacturing[J]. Materials Characterization, 2022, 193: 112315.
Chen Y, Yang C, Fan C*, et al. The influence of solution temperature on microstructure evolution and mechanical properties of ATI 718Plus repaired by wire and arc additive manufacturing[J]. Materials Science and Engineering: A, 2022, 852: 143641.
Liu Z, Fan C*, Yang C, et al. Dissimilar welding of high nitrogen stainless steel and low alloy high strength steel under different shielding gas composition: Process, microstructure and mechanical properties[J]. Defence Technology, 2022.
Xie WF, Fan CL, Yang C, et al. Comparison of welding temperature fields, residual stress distributions and deformations of Gas Tungsten Arc (GTA) and ultrasonic-wave-assisted gas tungsten pulsed arc (U-GTPA) welded DP780 steel joints. International Journal of Thermal Sciences. 2022, 184.
Fan, Qingkai, Chao Chen, Chenglei Fan*, Zeng Liu, Xiaoyu Cai, Sanbao Lin, Chunli Yang. Ultrasonic Suppression of Element Segregation in Gas Tungsten Arc Cladding AlCoCuFeNi High-Entropy Alloy Coatings. Surface & Coatings Technology, 2021, 420: 127364. (IF=4.158).
Zhuo, Yimin, Chunli Yang, Chenglei Fan*, Sanbao Lin. Effects of Trace Sn and Cr Addition on Microstructure and Mechanical Properties of TC17 Titanium Alloy Repaired by Wire Arc Additive Manufacturing. Journal of Alloys and Compounds, 2021, 161473. (IF=5.316).
Fan, Qingkai, Chao Chen, Chenglei Fan*, Zeng Liu, Xiaoyu Cai, Sanbao Lin, Chunli Yang. Effect of High Fe Content on the Microstructure, Mechanical and Corrosion Properties of AlCoCrFeNi High-Entropy Alloy Coatings Prepared by Gas Tungsten Arc Cladding. Surface & Coatings Technology, 2021, 418: 127242. (IF=4.158).
Fan, Qingkai, Chao Chen, Chenglei Fan*, Zeng Liu, Xiaoyu Cai, Sanbao Lin, Chunli Yang. Ultrasonic Induces Grain Refinement in Gas Tungsten Arc Cladding AlCoCrFeNi High-Entropy Alloy Coatings. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2021, 821: 141607. (IF=5.234).
Liu, Zeng, Chenglei Fan*, Zhu Ming, Chao Chen, Ang Liu, Chun-li Yang, San-bao Lin, Lang-ping Wang. Gas Metal Arc Welding of High Nitrogen Stainless Steel with Ar–N2-O2 Ternary Shielding Gas. Defence Technology, 2021, 17 (3): 923–31. (IF=3.172).
Zhuo, Yimin, Chunli Yang, Chenglei Fan*, Sanbao Lin, Yuanhang Chen, Chao Chen, Xiaoyu Cai. Grain Refinement of Wire Arc Additive Manufactured Titanium Alloy by the Combined Method of Boron Addition and Low Frequency Pulse Arc. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2021, 805: 140557. (IF=5.234).
Liu, Zeng, Chenglei Fan*, Chao Chen, Zhu Ming, Chunli Yang, Sanbao Lin, Langping Wang. Design and Evaluation of Nitrogen-Rich Welding Wires for High Nitrogen Stainless Steel. Journal of Materials Processing Technology, 2021, 288: 116885. (IF=5.551).
Zhang, Huijing, Fan Qing-Kai, Chenglei Fan, Chen Chao*. Effect of Pulsed Powder Ultrasound on Plasma Morphology and Its Changing Mechanism. International Journal of Advanced Manufacturing Technology, 2021, 116 (3): 1–8. (IF=3.226).
Yimin Zhuo, Chunli Yang, Chenglei Fan？, Sanbao Lin. Grain morphology evolution mechanism of titanium alloy by the combination of pulsed arc and solution element during wire arc additive manufacturing. Journal of Alloys and Compounds. 2021, 888:161641. (IF=5.316).
Yimin Zhuo, Chunli Yang, Chenglei Fan？, Sanbao Lin. Effect of diameter and content of zirconium dioxide on the microstructure and mechanical properties of the TC17 titanium alloy repaired by wire arc additive manufacture. Journal of Alloys and Compounds. 2021, 893:162295. (IF=5.316).
Dong BL, Cai XY, Lin SB, Ni ZD, Fan CL. Numerical simulation on the nonaxisymmetry arc characteristics in narrow gap TIG welding: responses to welding parameters. International Journal of Advanced Manufacturing Technology. 2021,114(7-8):2229-2242. (IF=3.32).
Bolun Dong, Xiaoyu Cai, Xia YH, Sanbao Lin*, Xiaolong Li, Chenglei Fan, Chen FK. Effects of interlayer temperature on the microstructures of wire arc additive manufactured Al-Zn-Mg-Cu alloy: Insights into texture responses and dynamic precipitation behaviors. Additive Manufacturing，2021, 48: 102453. (IF=10.998).
Zeng Liu, Chenglei Fan*, Zhu Ming*, Chao Chen, Chunli Yang, Sanbao Lin, Langping Wang. Optimization of Shielding Gas Composition in High Nitrogen Stainless Steel Gas Metal Arc Welding. Journal of Manufacturing Processes, 2020, 58: 19–29. (IF=5.01)
Zeng Liu, Chenglei Fan*, Chao Chen, Zhu Ming, Ang Liu, Chunli Yang, Sanbao Lin, Langping Wang. Optimization of the Microstructure and Mechanical Properties of the High Nitrogen Stainless Steel Weld by Adding Nitrides to the Molten Pool. Journal of Manufacturing Processes, 2020, 49: 355–364. (IF=5.01)
Chao Chen, Chenglei Fan*, Zeng Liu, Xiaoyu Cai, Sanbao Lin, Chunli Yang. Microstructure Evolutions and Properties of Al-Cu Alloy Joint in the Pulsed Power Ultrasonic-Assisted GMAW. Acta Metallurgica SinicaI-English letters, 2020.(IF=2.755).
Chao Chen, Chenglei Fan*, Xiaoyu Cai, Zeng Liu, Sanbao Lin, Chunli Yang. Characteristics of Arc and Metal Transfer in Pulsed Ultrasonic-Assisted GMAW. Welding Journal, 2020, 99: 203s-208s.(IF=1.219)
Chenglei Fan*, Chao Chen, Sanbao Lin, Zeng Liu, Xiaoyu Cai, Chunli Yang.. Microstructure homogenization of 2A14 aluminum alloy weld seam by ultrasonic irradiation in metal inert gas welding[J]. International Journal of Advanced Manufacturing Technology, 2020, 108(3): 1085-1089. (IF=3.226)
Chao Chen, Chenglei Fan*, Xiaoyu Cai, Sanbao Lin, Chunli Yang, Yimin Zhuo. Microstructure and mechanical properties of Q235 steel welded joint in pulsed and un-pulsed ultrasonic assisted gas tungsten arc welding. Journal of Materials Processing Technology, 2020, 275: 116335. (IF=5.551)
Chen, Chao, Chenglei Fan*, Xiaoyu Cai, Sanbao Lin, Chunli Yang. Ultrasonic Irradiation Induced the Microstructure Refinement and Texture Evolution of Ti–6Al–4V TIG Weld Seam. Science and Technology of Welding and Joining, 2020, 25 (1): 20–27. (IF=4.564).
Yimin Zhuo, Chunli Yang , Chenglei Fan*, Sanbao Lin , Chao Chen , Xiaoyu Cai. Microstructure and mechanical properties of wire arc additive repairing Ti–6.5Al–2Sn–2Zr–4Mo–4Cr titanium alloy. Materials Science and Technology，2020, 36: 1712-1719. (IF=1.920)
Yuanhang Chen, Chunli Yang, Chenglei Fan*, Yimin Zhuo, SanbaoLin, ChaoChen. Grain refinement of additive manufactured Ti-6.5Al-3.5Mo-1.5Zr-0.3Si titanium alloy by the addition of La2O3. Materials Letters. Materials Letters, 2020, 275: 128170. (IF=3.423).
Bolun Dong, Xiaoyu Cai, Sanbao Lin*, Xiaolong Li, Chenglei Fan, Chunli Yang, Haoran Sun. Wire arc additive manufacturing of Al-Zn-Mg-Cu alloy: Microstructures and mechanical properties. Additive Manufacturing，2020, 36: 101447. (IF=10.998).
Xiaoyu Cai, Bolun Dong, Xianlai Yin, Sanbao Lin*, Chenglei Fan, Chunli Yang. Wire arc additive manufacturing of titanium aluminide alloys using two-wire TOP-TIG welding: Processing, microstructures, and mechanical properties. Additive Manufacturing, 2020，35:101344. (IF=10.998).
Xiaoyu Cai, Bolun Dong, Sanbao Lin*, Chenglei Fan, Chunli Yang. Numerical analysis of arc physical properties in narrow gap TIG welding. International Journal of Advanced Manufacturing Technology, 2020, 106(11-12): 5509-5517. (IF=2.633)
Xie, Weifeng*, Te Huang, Chunli Yang, Chenglei Fan, Sanbao Lin, Wanghui Xu. Comparison of Microstructure, Mechanical Properties, Corrosion Behavior of Gas Metal Arc (GMA) and Ultrasonic-Wave-Assisted GMA (U-GMA) Welded Joints of Al–Zn–Mg Alloy. Journal of Materials Processing Technology, 2020, 277: 116470. (IF=5.551)
Yuanhang Chen , Chunli Yang , Chenglei Fan *, Yimin Zhuo , Sanbao Lin , Chao Chen. Microstructure evolution mechanism and mechanical properties of TC11-TC17 dual alloy after annealing treatment. Journal of Alloys and Compounds. Journal of Alloys and Compounds. 2020, 842:155874. (IF=5.316)
Chao Chen, Chenglei Fan*, Xiaoyu Cai, Sanbao Lin, Zeng Liu, Qingkai Fan, Chunli Yang. Investigation of formation and microstructure of Ti-6Al-4V weld bead during pulse ultrasound assisted TIG welding. Journal of Manufacturing Processes, 2019, 46: 241-247. (IF=3.462)
Chao Chen, Chenglei Fan*, Zeng Liu, Xiaoyu Cai, Sanbao Lin, Chunli Yang. Arc characteristics and weld appearance in pulsed ultrasonic assisted GTAW process. Results in Physics, 2019, 15: 102692. (IF=3.042).
Chao Chen, Chenglei Fan*, Xiaoyu Cai, Sanbao Lin, Chunli Yang. Effects of ultrasonic energy on short-circuiting transfer process in PU-GMA welding. Materials and Manufacturing Processes, 2019: 1-7. (IF=3.45).
Chao Chen, Chenglei Fan*, Xiaoyu Cai, Sanbao Lin, Chunli Yang. Analysis of droplet transfer, weld formation and microstructure in Al-Cu alloy bead welding joint with pulsed ultrasonic-GMAW method. Journal of Materials Processing Technology, 2019, 271, 144-151. (IF=4.178).
Chao Chen, Chenglei Fan*, Xiaoyu Cai, Sanbao Lin, Chunli Yang, Lei Zhou. Influence of pulsed ultrasound on short transfer behaviors in gas metal arc welding. Journal of Materials Processing Technology, 2019, 267, 376-383. (IF=4.178).
Dong BL, Cai XY, Lin SB, Ni ZD, Fan CL, Yang CL. Numerical simulation of arc characteristics in narrow gap TIG welding. International Journal of Mechanical Sciences. 2019, 161:105031. (IF=5.329).
Chao Chen, Chenglei Fan*, Sanbao Lin, Xiaoyu Cai, Lei Zhou, Sanfeng Ye, Chunli Yang. Effect of ultrasonic pattern on weld appearance and droplet transfer in ultrasonic assisted MIG welding process. Journal of Manufacturing Processes, 2018, 35: 368-372. (IF=3.462).
Chao Chen, Chenglei Fan*, Sanbao Lin, Lei Zhou, Chunli Yang. A new discovery of arc shape in pulsed ultrasonic wave assisted TIG welding. Physics of Plasmas. 2018, 080703, 25. (IF=1.913).
Kang Peng, Chunli Yang, Chenglei Fan* and Sanbao Lin. Thermal processes, microstructure, and mechanical properties near weld toe in double-sided double gas tungsten arc backing welding joint of 10CrNi3MoV steel. The International Journal of Advanced Manufacturing Technology, 2018, 96(1-4): 677-684. (IF=2.496).
Chao Chen, Sanbao Lin, Chenglei Fan*, Chunli Yang, Lei Zhou. Feasibility analysis of pulsed ultrasonic for controlling the GMAW process and weld appearance. The International Journal of Advanced Manufacturing Technology, 2018 (1):1-6. (IF=2.496).
Kang Peng, Chunli Yang, Chenglei Fan* and Sanbao Lin. In situ observation and electron backscattered diffraction analysis of granular bainite in simulated heat-affected zone of high-strength low alloy steel. Science and Technology of Welding and Joining, 2018, 23(2): 158-163. (IF=2.358).
Chenglei Fan*, Lei Zhou, Zeng Liu, Chunli Yang, Sanbao Lin, Weifeng Xie, He Tong. Arc character and droplet transfer of pulsed ultrasonic wave-assisted GMAW. The International Journal of Advanced Manufacturing Technology. 2018, 95(5-8): 2219-2226. (IF=2.496).
Weifeng X, Chenglei Fan, Chunli Y, Sanbao Lin. Experimental Investigation on Acoustic Control Droplet Transfer in Ultrasonic-Wave-Assisted Gas Metal Arc Welding. Metallurgical and Materials Transactions B, 2018, 49(1): 274-281. (IF=1.952).
Xiaoyu Cai, Chenglei Fan, Sanbao Lin, Chunli Yang. Optimization of shielding gas composition in narrow gap GMA welding based on response surface methodology. The International Journal of Advanced Manufacturing Technology, 2018, 95(5-8): 2405-2412. (IF=2.496).
Kang Peng, Chunli Yang, Chenglei Fan*, Sanbao Lin. Microstructure and mechanical properties of simulated unaltered coarse grained heat affected zones of 10CrNi3MoV steel by double-sided double arc welding. Journal of Materials Processing Technology. 2018, 251:225-231 (IF=4.178).
Chenglei Fan*, Weifeng Xie, Chunli Yang, Sanbao Lin, Yangyang Fan. Process Stability of Ultrasonic-Wave-Assisted GasMetal Arc Welding. Metallurgical and Materials Transactions A. 2017, 48 (10):4615-4621. (IF=1.985).
Xiaoyu Cai, Chenglei Fan, Sanbao Lin*, Chunli Yang, Li Hu, Xiangru Ji. Effects of shielding gas composition on arc behaviors and weld formation in narrow gap tandem GMAW. International Journal of Advanced Manufacturing Technology. 2017, 91 (9-12):3449-3456. (IF=2.462).
Xiaoyu Cai, Chenglei Fan, Sanbao Lin*, Xiangru Ji, Chunli Yang, Wenxuan Guo. Effects of shielding gas composition on arc properties and wire melting characteristics in narrow gap MAG welding. Journal of Materials Processing Technology, 2017, 244: 225-230. (IF: 4.178).
J.Y Bai, C. L. Fan, S.B Lin*, C.L Yang, B. L Dong. Mechanical properties and fracture behaviors of GTA-additive manufactured 2219-Al after an especial heat treatment. Journal of Materials Engineering and Performance. 2017, 26: 1808–1816. (IF=1.476 ).
Xie W F, Fan C L*, Yang C L, Lin S B. Pulsed ultrasonic wave assisted MIG welding of 7A52 aluminum alloy. Welding Journal. 2016, 95(7): p239s-247s.（IF=1.34）.
Xie W F, Fan C L, Yang C L*, Lin S B. Effect of acoustic field parameters on arc acoustic binding during ultrasonic wave-assisted arc welding. Ultrasonics Sonochemistry. 2016, 29:476-484. (IF=7.279)
J.Y Bai, C. L. Fan, S.B Lin*, C.L Yang, B. L Dong. Effects of thermal cycles on microstructure evolution of 2219-Al during GTA-additive manufacturing [J]. Internal Journal of Advanced Manufacturing Technology. (2016) 87:2615–2623（IF=2.462）
Xiaoyu Cai, Chenglei Fan, Sanbao Lin*, Chunli Yang, J Y Bai. Molten pool behaviors and weld forming characteristics of all-position tandem narrow gap GMA. International Journal of Advanced Manufacturing Technology. 2016, 87:2437-2444.（IF=2.462）
Xiaoyu Cai, Chenglei Fan, Sanbao Lin*, Chunli Yang, Xiangru Ji, Li Hu. Effects of shielding gas composition on arc characteristics and droplet transfer in tandem narrow gap GMA welding. Science and Technology of Welding and Joining. 2016, 22 (5):446-453. (IF=2.358).
X Y Cai, S B Lin, C L Fan, C L Yang, W Zhang, Y W Wang. Molten pool behaviour and weld forming mechanism of tandem narrow gap vertical GMAW. Science and Technology of Welding and Joing. 2016, 21(2): 124-130. （IF=1.659）
Qihao Chen, Sanbao Lin, Chunli Yang*, Chenglei Fan. Effect of Ultrasonic Impact on the Microstructure of Welded Joint of 2195Al-Li alloy. Acta Metall. Sin. (Engl. Lett.). 2016, 22(3):18-20.（IF=1.828）
J Y Bai, C L Yang, S B Lin*, B L Dong, C. L Fan. Mechanical properties of 2219-Al components produced by additive manufacturing with TIG. Internal Journal of Advanced Manufacturing Technology. 2016, 33(2):27-29.(IF= 2.462)
谢伟峰, 范成磊*, 杨春利, 林三宝, 张玉岐. 超声复合电弧声调控特性研究. 物理学报. 2015, 64(9): 421-429.（IF=0.644）
Xu W. H, Lin S B*, Fan C L, Yang C L. Prediction and optimization of weld bead geometry in oscillating arc narrow gap all-position GMA welding. International Journal of Advanced Manufacturing Technology. 2015, 79(1-4): 183-196.（IF=2.462）
Zhang Q L, Yang C L, Lin S B*, Fan C L. Soft variable polarity plasma arc horizontal welding technology and weld asymmetry. Science and Technology of Welding and Joining.2015, 20(4): 297-306. (IF=2.358).
Q L Zhang, C L Fan, S B Lin*, C L Yang. Novel soft variable polarity plasma arc and its influence on keyhole in horizontal welding of aluminium alloys. Science and Technology of Welding and Joining. 2014, 19(6):493-499. （IF=2.358）
Q L Zhang, C L Fan, C L Yang*, S B Lin. Horizontal welding of aluminium alloys by soft plasma arc. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 2014, 228(11): 1481-1490. (IF=1.752)
Xu W. H, Lin S B*, Fan C L, Yang C L. Evaluation on microstructure and mechanical properties of high-strength low-alloy steel joints with oscillating arc narrow gap GMA wel-ding. International Journal of Advanced Manufacturing Technology. 2014, 75(9-12):1439-1446. （IF=2.462）
Xu W. H, Lin S B*, Fan C L, Zhuo X Q, Yang C L. Statistical modelling of weld bead geometry in oscillating arc narrow gap all-position GMA welding. International Journal of Advanced Manufacturing Technology.2014, 72(9-12):1705-1716. （IF=2.462）
He Huan, Yang Chunli, Chen Zhe, *Lin Sanbao, Fan Chenglei. Strength Prediction of Aluminum-Stainless Steel-Pulsed TIG Welding-Brazing Joints with RSM and ANN. Acta Metallurgica Sinica (English Letters). 2014, 27(6): 1012-1017. (IF=1.828)
Fan Chenglei*, Yang Chunli, Lin Sanbao, Fan Yangyang, Xie Weifeng. Arc characteristics of ultrasonic wave-assisted GMAW. Welding Journal. 2013, 92(12):375s-380s. （IF=1.34）
Huang, J., Fan, C L., Song, G., Li, Y., He, X., Zhang, X., Zhao, Y. (2013). Enhanced infrared emissivity of CeO2 coatings by La doping. Applied Surface Science, 280, 605-609. （IF=5.155）
Zhang Xinjiang, He Xiaodong, Fan Chenglei, Li Yibin*, Song Guangping, Sun Yue, Huang Jianping. Microstructural and mechanical characterization of multiphase Nb-based composites from Nb-Ti-C-B system. International Journal of Refractory Metals and Hard Materials. 2013, 41(11): 185-190. （IF=2.794）
He Huan, Lin Sanbao, Yang Chunli*, Fan Chenglei, Chen Zhe. Combination Effects of Nocolok Flux with Ni Powder on Properties and Microstructures of Aluminum-Stainless Steel TIG Welding-Brazing Joint. Journal of Materials Engineering and Performance. 2013, 22(11): 3315-3323. （IF=1.476）
Fan Y Y, Fan C L, Yang C L*, Liu W G, Lin S B. Research on short circuiting transfer mode of ultrasonic assisted GMAW method. Science and Technology of Welding and Joining. 2012, 17(3):186-190. （IF=1.34）
Fan Y Y*, Yang C L, Fan C L, Lin S B, Liu W G. Ultrasonic Wave Assisted GMAW. Welding Journal. 2012, 91(3): 91S-99S. （IF=1.34）
Huang Jianping, Li Yibin*, He Xiaodong, Song Guangping, Fan Chenglei, Sun Yue, Fei Weidong, Du Shanyi. Enhanced spectral emissivity of CeO2 coating with cauliflower-like microstructure. APPLIED SURFACE SCIENCE. 2012, 259(10): 301-305. （IF=5.155）
Guo Qiwen*, Fan Chenglei, Liu Hongjun, Cai Yanli. Nylon 66 Toughening Nylon 11 by in situ Polymerization. POLYMERS & POLYMER COMPOSITES. 2011, 19(2-3): 69-74.（IF=0.683）
京公网安备 11010802027423号