个人简介

教育背景 2000-2004 清华大学 工程力学学士 2004-2009 清华大学 工程力学博士 工作履历 2009-2012 美国西北大学机械工程系 博士后 2012-2018 清华大学工程力学系 副教授 2018-2021 清华大学工程力学系 长聘副教授 2022-至今 清华大学工程力学系 长聘教授 奖励与荣誉 2009 清华大学优秀博士论文 2011 全国优秀博士学位论文奖 2015 中国力学青年科技奖 2017 国家自然科学基金委优秀青年基金 2019 中国力学学会全国徐芝纶力学优秀教师奖 2020 清华大学第九届青年教师教学大赛一等奖 2020 钱令希计算力学青年奖

研究领域

围绕固体强度与断裂的理论、计算和工程应用开展研究，主要包括： 强冲击载荷下材料及结构的动态响应及失效 轻质多功能防护结构设计 生物组织损伤及修复重建 基于机器学习和计算力学仿真的反向工程设计

主要研究领域为计算固体力学、断裂力学、冲击动力学

近期论文

查看导师最新文章 （温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

Chen H L, Wang K J, Du Z B, Liu W M, Liu Z L. Predicting the thermophysical properties of skin tumor based on the surface temperature and deep learning. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2021, 180: 121804. Wang Y G, Wang K J, Wang T, Chu D Y, Liu Z L. Study of the transition from strain localization to fracture of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si alloy by experiments and phase-field modeling. INTERNATIONAL JOURNAL OF FRACTURE, 2021, 231(1): 95-108. Lu L K, Liu Z L, Zhuang Z. A unified perspective of incremental J-integrals by the generalized Griffith framework. ENGINEERING FRACTURE MECHANICS, 2021, 254: 107907. Yang F Y, Li Z J, Liu Z L, Zhuang Z. Shock Loading Mitigation Performance and Mechanism of the PE/Wood/PU/Foam Structures. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2021, 155: 103904. Yao K L, Chu D Y, Li T, Liu Z L, Guo B H, Xu J, Zhuang, Z. Atomic-scale simulation of hugoniot relations and energy dissipation of polyurea under high-speed shock. ENGINEERING COMPUTATIONS, 2021, 38(3): 1209-1225. Ning S W, Chu D Y, Jiang H, Yang F Y, Liu Z L, Zhuang Z. The role of material and geometric nonlinearities and damping effects in designing mechanically tunable acoustic metamaterials. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2021, 197: 106299. Ning S W, Chu D Y, Yang F Y, Jiang H, Liu Z L, Zhuang Z. Characteristics of Band Gap and Low-Frequency Wave Propagation of Mechanically Tunable Phononic Crystals With Scatterers in Periodic Porous Elastomeric Matrices. JOURNAL OF APPLIED MECHANICS, 2021, 88(5): 051001. Ning S W, Yan Z M, Chu D Y, Jiang H, Liu Z L, Zhuang Z. Ultralow-frequency tunable acoustic metamaterials through tuning gauge pressure and gas temperature. EXTREME MECHANICS LETTERS, 2021, 44: 101218. Lu L K, Liu Z L, Cui Y N, Zhuang Z. Driving force on line fracture process zone and fracture parameters suitable for elastic-plastic materials. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2021, 217: 15-26. Luo C C, Ning S W, Liu Z L, Li X, Zhuang Z. Computational design of resonant phononic crystal for aperiodic stress wave attenuation. ENGINEERING COMPUTATIONS, 2021, 38(2):895-912. Chen H L, Du Z B, Li X, Zhou H L, Liu Z L. Identification of pipe inner surface in heat conduction problems by deep learning and effective thermal conductivity transform. ENGINEERING COMPUTATIONS, 2020, 37(9): 3505-3523. Ning S W, Luo C C, Yang F Y, Liu Z L, Zhuang Z. Mechanically Tunable Solid/Solid Phononic Crystals Through the Rearrangement of Hard Scatterers Controlled by the Deformation of Periodic Elastomeric Matrixes. JOURNAL OF APPLIED MECHANICS, 2020, 87(10): 101002. Yao K L, Liu Z L, Li T, Guo B H, Zhuang Z. Mesoscale structure-based investigation of polyurea dynamic modulus and shock-wave dissipation. POLYMER, 2020, 202: 122741. Lu L K, Liu Z L, Wang T, Zhuang Z. An analytical model of fracture process zone to explain why crack-tip opening angle works. ENGINEERING FRACTURE MECHANICS, 2020, 233: 107054. Wang T, Liu Z L, Cui Y N, Ye X, Liu X M, Tian R, Zhuang Z. A thermo-elastic-plastic phase-field model for simulating the evolution and transition of adiabatic shear band. Part I. Theory and model calibration. ENGINEERING FRACTURE MECHANICS, 2020, 232: 107028. Wang T, Liu Z L, Cui Y N, Ye X, Liu X M, Tian R, Zhuang Z. A thermo-elastic-plastic phase-field model for simulating the evolution and transition of adiabatic shear band. Part II. Dynamic collapse of thick-walled cylinder. ENGINEERING FRACTURE MECHANICS, 2020, 231: 107027. Wang T, Ye X, Liu Z L, Liu X M, Chu D Y, Zhuang Z. A phase-field model of thermo-elastic coupled brittle fracture with explicit time integration. COMPUTATIONAL MECHANICS, 2020, 65(5): 1305-1321. Luo C C, Ning S W, Liu Z L, Zhuang Z. Interactive inverse design of layered phononic crystals based on reinforcement learning. EXTREME MECHANICS LETTERS, 2020, 36: 100651. Li X, Ning S W, Liu Z L, Yan Z M, Luo C C, Zhuang Z. Designing phononic crystal with anticipated band gap through a deep learning based data-driven method. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, 2020, 361, 112737. Ning S W, Yang F Y, Luo C C, Liu Z L, Zhuang Z. Low-frequency tunable locally resonant band gaps in acoustic metamaterials through large deformation. EXTREME MECHANICS LETTERS, 2020, 35: 100623. Cheng J, Liu Z L, Luo C C, Li T, Li Z J, Kang Y, Zhuang Z. Revealing the high-frequency attenuation mechanism of polyurea-matrix composites. ACTA MECHANICA SINICA, 2020, 36(1): 130-142. Wang P, Xiang Y H, Wang X G, Liu Z L, Qu S X, Zhuang Z. New insight for mechanical properties of metals processed by severe plastic deformation. INTERNATIONAL JOURNAL OF PLASTICITY, 2019, 123: 22-37. Wang T, Ye X, Liu Z L, Chu D Y, Zhuang Z. Modeling the dynamic and quasi-static compression-shear failure of brittle materials by explicit phase field method. COMPUTATIONAL MECHANICS, 2019, 64(6): 1537-1556. Wang T, Ye X, Liu Z L, Gao Y, Zhuang Z. An optimized perforation clusters spacing model based on the frictional shale layer's debonding. SCIENCE CHINA-PHYSICS MECHANICS & ASTRONOMY, 2019, 62(11): 114621. Wang T, Liu Z L, Gao Y, Ye X, Zhuang Z. Theoretical and numerical models for the influence of debonding on the interaction between hydraulic fracture and natural fracture. ENGINEERING COMPUTATIONS, 2019, 36(8): 2673-2693. Zeng Q L, Liu Z L, Wang T, Gao Y, Zhuang Z. Numerical modeling of the simultaneous propagation of multiple hydraulic fractures with fluid lags. ENGINEERING COMPUTATIONS, 2019, 36(8): 2694-2713. Li Z J, Du Z B, You X C, Liu Z L, Cheng J, Luo C C, Chu D Y, Ning S W, Kang Y, Yang C, Zhuang Z. Numerical study on dynamic mechanism of brain volume and shear deformation under blast loading. ACTA MECHANICA SINICA, 2019, 35(5): 1104-1119. Gao Y, Liu Z L, Wang T, Zeng Q L, Li X, Zhuang Z. XFEM modeling for curved fracture in the anisotropic fracture toughness medium. COMPUTATIONAL MECHANICS, 2019, 63(5): 869-883. Chu D Y, Li X, Liu Z L, Cheng J B, Wang T, Li Z J, Zhuang Z. A unified phase field damage model for modeling the brittle-ductile dynamic failure mode transition in metals. ENGINEERING FRACTURE MECHANICS, 2019, 212: 197-209. Li X, Liu Z L, Cui S Q, Luo C C, Li CF, Zhuang Z. Predicting the effective mechanical property of heterogeneous materials by image based modeling and deep learning. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, 2019, 347: 735-753. Lin P, Nie J F, Liu Z L, Zhuang Z. Study of two hardening mechanism caused by geometrically necessary dislocations in thin films with passivation layer. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2019, 160: 59-67. Hu J Q, Zhuang Z, Liu F X, Liu X M, Liu ZL. Investigation of grain boundary and orientation effects in polycrystalline metals by a dislocation-based crystal plasticity model. COMPUTATIONAL MATERIALS SCIENCE, 2019, 159: 86-94. Li X, Chu D Y, Gao Y, Liu Z L. Numerical study on crack propagation in linear elastic multiphase composite materials using phase field method. ENGINEERING COMPUTATIONS, 2019, 36(1): 307-333. Gao Y, Liu Z L, Zhuang Z, Hwang K C. On the material constants measurement method of a fluid-saturated transversely isotropic poroelastic medium. SCIENCE CHINA-PHYSICS MECHANICS & ASTRONOMY, 2019, 62(1): 14611. Wang P, Liu F X, Cui Y N, Liu Z L, Qu S X, Zhuang Z. Interpreting strain burst in micropillar compression through instability of loading system. INTERNATIONAL JOURNAL OF PLASTICITY, 2018, 107: 150-163. Gao Y, Liu Z L, Wang T, Zeng Q L, Li X, Zhuang Z. Crack forbidden area in the anisotropic fracture toughness medium. EXTREME MECHANICS LETTERS, 2018, 22: 172-175. Zeng Q L, Liu Z L, Wang T, Gao Y, Zhuang Z. Fully coupled simulation of multiple hydraulic fractures to propagate simultaneously from a perforated horizontal wellbore. COMPUTATIONAL MECHANICS, 2018, 61: 137-155. Zeng Q L, Liu Z L, Wang T, Gao Y, Zhuang Z. Stability analysis of the propagation of periodic parallel hydraulic fractures. INTERNATIONAL JOURNAL OF FRACTURE, 2017: 1-11. Wang T, Liu Z L, Zeng Q L, Gao Y, Zhuang Z. XFEM modeling of hydraulic fracture in porous rocks with natural fractures. SCIENCE CHINA PHYSICS, MECHANICS & ASTRONOMY, 2017, 60(8): 084612. Zeng Q L, Liu Z L, Wang T, Gao Y, Zhuang Z. Fully coupled simulation of multiple hydraulic fractures to propagate simultaneously from a perforated horizontal wellbore. COMPUTATIONAL MECHANICS, 2017: 1-19. Wang C Y, Liu Z L, Gao L J, Xu D D, Zhuang Z. Analytical and numerical modeling on resonant response of particles in polymer matrix under blast wave. COMPUTATIONAL MATERIALS SCIENCE, 2017, 140: 70-81. Liu F X, Liu Z L, Pei X Y, Hu J Q, Zhuang Z. Modeling high temperature anneal hardening in Au submicron pillar by developing coupled dislocation glide-climb model. INTERNATIONAL JOURNAL OF PLASTICITY, 2017, 99: 102-119. Liu F X, Liu Z L, Lin P, Zhuang Z. Numerical investigations of helical dislocations based on coupled glide-climb model. INTERNATIONAL JOURNAL OF PLASTICITY, 2017, 92: 2-18. Gao Y, Liu Z L, Zhuang Z, Gao D L, Hwang K C. Cylindrical borehole failure in a transversely isotropic poroelastic medium. JOURNAL OF APPLIED MECHANICS, 2017, 84(11): 111008. Gao Y, Liu Z L, Zeng Q L, Wang T, Hwang K C. Theoretical and numerical prediction of crack path in the material with anisotropic fracture toughness. ENGINEERING FRACTURE MECHANICS, 2017, 180: 330-347. Wang L Y, Liu Z L, Zhuang Z. Continuum modeling of surface roughening in heteroepitaxial structures based on phase field theory. COMPUTATIONAL MATERIALS SCIENCE, 2017, 136: 109-117. Hu J Q, Liu Z L, Cui Y N, Liu F X, Zhuang Z. A new view of incipient plastic instability during nanoindentation. CHINESE PHYSICS LETTERS, 2017, 34(4): 046101. Gao Y, Liu Z L, Zhuang Z, Hwang K C. A reexamination of the equations of anisotropic poroelasticity. JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME, 2017, 84(5): 051008. Hu J Q, Liu Z L, Chen K G, Zhuang Z. Investigations of shock-induced deformation and dislocation mechanism by a multiscale discrete dislocation plasticity model. COMPUTATIONAL MATERIALS SCIENCE, 2017, 131: 78-85. Xu D D, Liu Z L, Zhuang Z, Zeng Q L, Wang T. Study on interaction between induced and natural fractures by extended finite element method. SCIENCE CHINA-PHYSICS MECHANICS & ASTRONOMY, 2017, 60(2): 024611. Wang Y L, Liu Z L, Yang H L, Zhuang Z. Finite element analysis for wellbore stability of transversely isotropic rock with hydraulic-mechanical-damage coupling. SCIENCE CHINA-TECHNOLOGICAL SCIENCES, 2017, 60(1): 133-145. Wang T, Liu Z L, Gao Y, Zeng Q L, Zhuang Z. Theoretical and numerical models to predict fracking debonding zone and optimize perforation cluster spacing in layered shale. JOURNAL OF APPLIED MECHANICS, 2017, 85(1): 011001. Chu D Y, Li X, Liu Z L. Study the dynamic crack path in brittle material under thermal shock loading by phase field modeling. INTERNATIONAL JOURNAL OF FRACTURE, 2017, 330: 1-16. Gao L J, Wang C Y, Liu Z L, Zhuang Z. Theoretical aspects of selecting repeated unit cell model in micromechanical analysis using displacement-based finite element method. CHINESE JOURNAL OF AERONAUTICS, 2017, 30(4): 1417-1426. Zeng Q L, Wang T, Liu Z L, Zhuang Z. Simulation-based unitary fracking condition and multiscale self-consistent fracture network formation in shale. JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME, 2017, 84(5): 051004. Wang Y L, Zhuang Z, Liu Z L, Yang H L, Li C F. Finite element analysis for inclined wellbore stability of transversely iso-tropic rock with HMCD coupling based on weak plane strength criterion. SCIENCE CHINA-TECHNOLOGICAL SCIENCES, 2017, 60(4): 624-637.