李峰 - 哈尔滨理工大学 - 材料科学与工程学院

个人简介

学习经历 1994.09-1997.07 齐齐哈尔市实验中学高中生 1997.09-2001.07 哈尔滨理工大学金属材料专业工学学士 2001.09-2004.02 哈尔滨理工大学材料加工专业工学硕士 2004.03-2007.12 哈尔滨工业大学塑性加工专业工学博士 2008.06-2010.10 哈尔滨工程大学材料科学与工程专业博士后工作经历 2008.03-2009.07 哈尔滨理工大学材料成型系讲师 2009.08-2012.08 哈尔滨理工大学材料成型系副教授(破格) 2012.09-2018.09 哈尔滨理工大学材料成型系教授 2018.10-2021.06 哈尔滨理工大学材料成型系教授、博导 2021.07-至今哈尔滨理工大学材料成型系二级教授、博导人才奖励及称号 2022年黑龙江省杰出青年基金获得者 2018年黑龙江省级领军人才梯队后备带头人 2015年第十四届霍英东教育基金会高等院校青年教师奖 2013年黑龙江省普通高等学校新世纪优秀人才 2013年第十一届哈尔滨市青年科技奖 2018年“理工英才”计划杰出青年人才 2011年哈尔滨理工大学校青年拔尖创新人才(一/二/三遴选均入选) 2016年第二届校青年五四奖章 2020年校科技工作特别贡献奖科研奖励 2019年黑龙江省自然科学二等奖1项 (排名1) 2016年黑龙江省自然科学二等奖1项 (排名3) 2011年黑龙江省技术发明二等奖1项 (排名5) 2011年黑龙江省自然科学三等奖1项 (排名3) 2019年黑龙江省高校科学技术二等奖1项 (排名1) 2017年哈尔滨市科学技术二等奖1项 (排名1) 2013年黑龙江省自然科学技术学术成果一等奖1项 (排名1) 2012年黑龙江省高等教育学会优秀教育科研成果一等奖1项 (排名1)

研究领域

高性能轻合金挤压成形/成性一体化技术板材柔性智能介质阻尼成形技术与装备特种轧制复合板和组织梯度板材成形技术材料成型过程CAD/CAE/CAM集成技术

近期论文

查看导师最新文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

Ye Wang, Feng Li*, Nan Bian**, Xing Mao Xiao. Coordinated control of preferred orientation and uniformity of AZ31 in accumulative alternating back extrusion. Mat Sci Eng A, 2021, 818, 141366 (SCI) Zhen-yu Liu, Feng Li*, Xue-wen Li, Jie Xu**. Characteristic analysis and squeezing force mathematical model for magnetorheological fluid in squeeze mode. J Magn Magn Mater, 2021,167736(SCI) Yuan Yuan Mu, Feng Li*, Chao Li, Yun Qi Zang, Jie Xu**. Mechanism of pre-deformation effect on sheet deep drawing forming under magnetic field condition using a magnetorheological fluid (MRF) medium. Int J Adv Manuf Tech, 2021,116(3-4):863-875(SCI) Lei Gao, Feng Li*, Peng Da Huo, Chao Li, Jie Xu**. Accurate prediction of the extrusion forming bonding reliability for heterogeneous welded sheets based on GA-BP neural network. J Adv Manuf Tech, 2021,117(3-4):765-774(SCI) Xi Jie Zhang, Feng Li*, Ye Wang**, Chao Li, Xing Mao Xiao. Recrystallization Behavior and Texture Evolution of Magnesium Alloy Bending Products under Staggered Extrusion. J Mater Eng Perform, 2021, 30(11), 8108-8116(SCI) Nan Bian, Feng Li*,Ye Wang**, Chao Li. Strengthening Mechanism of Room Temperature Mechanical Properties for AZ31 Magnesium Alloy by Continuous Variable Cross section Direct Extrusion.J Mater Eng Perform,2021,30(12):9215-9226(SCI) Ye Wang, Feng Li*, Xue Wen Li, Wen Bin Fang. Unusual texture formation and mechanical property in AZ31 Magnesium Alloy sheets processed by CVCDE. J Mater Process Tech, 2020, 275(1): 116360(SCI, ESI高引论文) Yan Peng Wang, Feng Li*, Xue Wen Li.Effect of extrusion ratio(λ) on dynamic recrystallization of AZ31 magnesium alloy bending products prepared by staggered extrusion (SE). Int J Adv Manuf Tech, 2020,108(1-2):289-297 (SCI) Yu Wang, Feng Li*, Ye Wang, Lei Gao.Effect of dynamic recrystallization on grain refinement during interactive alternating forward extrusion of AZ31B magnesium alloy. J Mater Eng Perform, 2020,29(5):2748-2756(SCI) Ye Wang, Feng Li*, Xue Wen Li, Wen Bin Fang. Preparation Mechanism of Fine-Grained Magnesium Alloys by Accumulative Alternating Back Extrusion.JOM, 2020,72(7):2578-2585 (SCI) Yan Peng Wang, Feng Li*, Ye Wang, Xue Wen Li, Wen Bin Fang. Effect of Extrusion Ratio on the Microstructure and Texture Evolution of AZ31 Magnesium Alloy by the Staggered Extrusion (SE). J Magnes Alloys, 2020, 8(4):1304-1313 (SCI) Zhen Yu Liu, Feng Li*, Yuan Yuan Mu, Jie Xu. Comprehensive evaluation of process parameters optimization for sheet piercing assited by magnetic medium based on grey correlation analysis. Results Phys, 2020,19:103288 (SCI) Wen Kang, Feng Li*,Wen Yong Shi, Xue Wen Li. Effect of Different Microstructure on Corrosion Behavior of Magnesium Alloy Sheets. Int J Electrochem Sci, 2020,15(9):9796-9810(SCI) Ze Ping Bao, Feng Li*, Chao Li, Zhen Yu Liu. Enhancement on deformation uniformity of the target sheet by bulging process with magnetic medium and overlapping sheet.Appl Phys A-Mater, 2019, 125(2):116(SCI) Ye Wang, Feng Li*, Xue Wen Li, Wen Bin Fang. Process model and experimental analysis of circumferential extending extrusion forming for magnesium alloy sheet.Int J Adv Manuf Tech, 2019,102(5-8):1547-1556 (SCI) Yan Peng Wang, Feng Li*, Wen Yong Shi, Xue Wen Li, Wen Bin Fang. Dynamic Recrystallization and Metal Flow Behavior of AZ31 Magnesium Alloy Bending Products Processed by Staggered Extrusion. J Mater Eng Perform, 2019,28(6): 3551-3559(SCI) Yang Liu, Feng Li*, Chao Li, Jie Xu. Enhancing formability of spherical bottom cylindrical parts with magnetic medium on deep drawing process. Int J Adv Manuf Tech, 2019,103(5-8):1669-1679(SCI) Yang Liu, Feng Li*, Chao Li, Jie Xu. Effect of reverse pre-bulging on magnetic medium deep drawing formability of aluminum spherical bottom cylindrical parts. Int J Adv Manuf Tech, 2019, 103(9-12): 4649-4657(SCI) Yang Liu, Feng Li*, Wen-yong Shi, Xue-wen Li, Wen-bin Fang. Multi-objective optimization method for magnetic media pre-bulging process parameters of spherical bottom cylindrical parts based on response surface.Results Phys, 2019,14:102487(SCI) Yan Peng Wang, Feng Li*, Wen Yong Shi, Xue Wen Li, Wen Bin Fang. Microstructure, bending behavior and texture evolution of AZ31B magnesium alloy bending products processed by staggered extrusion (SE). Mater Charact, 2019,155(9):109842 (SCI)