近期论文
查看导师最新文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
1. Zhang QQ, Hao SJ, Zhang ZH, Ren LQ, et al. The microstructure of a selective laser melting (SLM)-fabricated NiTi shape memory alloy with superior tensile property and shape memory recoverability. Applied Materials Today. 2020, 19: 100547.
2. Shao YL, Zhao J, Fan Y, Zhang ZH, Ren LQ, et al. Shape memory superhydrophobic surface with switchable transition between "Lotus Effect" to "Rose Petal Effect" . Chemical Engineering Journal. 2020, 382: 122989
3. Wang HJ, Zhang ZH, Wang ZK, Ren LQ, et al. Multi stimuli-Responsive Microstructured Superamphiphobic Surfaces with Large-Range, Reversible Switchable Wettability for Oil. ACS Applied Materials & Interfaces. 2019, 11(31): 28478-28486.
4. Zhang PP, Li FH, Zhang XF, Ren LQ, et al. Thermal Shock Resistance of Thermal Barrier Coatings with Different Surface Shapes Modified by Laser Remelting. Journal of Thermal Spray Technology. 2019, 28(3): 417-432.
5. Zhang ZH, Wang X, Zhang QQ, Ren LQ, et al. Fabrication of Fe-based composite coatings reinforced by TiC particles and its microstructure and wear resistance of 40Cr gear steel by low energy pulsed laser cladding. Optics and Laser Technology. 2019, 119: 105622.
6. Zhang PP, Zhang XF, Li FH, Zhang ZH, Ren LQ, et al. Hot Corrosion Behavior of YSZ Thermal Barrier Coatings Modified by Laser Remelting and Al Deposition. Journal of Thermal Spray Technology. 2019, 28(6): 1225-1238.
7. Zhang ZH, Wang HJ, Liang YH, Ren LQ, et al. One-step fabrication of robust superhydrophobic and superoleophilic surfaces with self-cleaning and oil/water separation function. Scientific Reports. 2018, 8: 3869.
8. Su YC, Luo C, Zhang ZH*, et al. Bioinspired surface functionalization of metallic biomaterials. Journal of the Mechanical Behavior of Biomedical Materials. 2018, 77: 90-105.
9. Liu JJ, Zhang ZH*, Yu ZL, et al. Experimental study and numerical simulation on the structural and mechanical properties of Typha leaves through multimodal microscopy approaches. Micron. 2018, 104: 37-44.
10. Lin PY, Zhang ZH*, Kong SH, et al. Mechanical properties and wear resistance of ZrO2 particulate-reinforced composite layer on compacted graphite cast iron processed by selective laser alloying. Journal of Laser Applications. 2017, 29(3): 032003
11. Zhang ZH, Shao FX, Liang YH, et al. Wear Behavior of Medium Carbon Steel with Biomimetic Surface Under Starved Lubricated Conditions. Journal of Materials Engineering and Performance. 2017, 26 (7): 3420-3430.
12. Liu JJ, Zhang ZH*, Yu ZL, et al. The Structure and Flexural Properties of Typha Leaves. Applied Bionics and Biomechanics. 2017, 1249870
13. Lin Pengyu, Zhang zhihui*, Ren Luquan, et al. Mechanical Properties of Vermicular Graphite Cast Iron Processed by Selective Laser Surface Alloying with Ultra-fine ZrO2 Ceramic Particulates，ACTA METALLURGICA SINICA-ENGLISH LETTERS 2016, 29(11): 985-992.
14. Wang Zhaozhi, Gao Ke, Zhang Zhihui*, et al. Effects of Bionic Units in Different Scales on the Wear Behavior of Bionic Impregnated Diamond Bits. JOURNAL OF BIONIC ENGINEERING, 2016, 13 (4): 659-668.
15. Zhang Panpan, Zhang Zhihui*, Ren Luquan, et al. Dimension, hardness and prediction models of bionic coupling units processed by laser for gray cast iron. JOURNAL OF LASER APPLICATIONS . 2016, 28(2) : 022007.
16. Wang SP, Zhang ZH*, Ren LQ, Zhao HW, Liang YH, Zhu B, Design and driving characteristics of a novel ‘pusher’ type piezoelectric actuator. Smart Materials and Structures, 2016, 25: 015005.
17. Wang ZZ, Zhang ZH*, Sun YH, Gao K, Liang YH, Li XJ, Ren LQ. Wear behavior of bionic impregnated diamond bits. Tribology International, 2016, 94: 217-222.
18. Liang YH, Zhao Q, Han ZW, Zhang ZH*, Li XJ, Ren LQ. Reaction behavior of TiC/Cu composite via thermal explosion reaction (TE) under Ar and air atmosphere. Corrosion Science, 2015, 93: 283-292.
19. Yang X, Zhang ZH*, Wang JT, Ren LQ. Investigation of nanomechanical properties and thermal fatigue resistance of gray cast iron processed by laser alloying. Journal of Alloys and Compounds, 2015, 626: 260-263.
20. Zhang ZH, Lin PY, Kong SH, Li XJ, Ren LQ. Thermal fatigue behavior of Mg-9Al-Zn alloy with biomimetic strengthening units processed by laser surface remelting, Optics and Laser Technology, 2015, 70: 1-6.
21. Wang SP, Zhang ZH*, Ren LQ, Zhao HW, Liang, YH, Zhu B. Design and driving characteristic researches of a novel bionic stepping piezoelectric actuator with large load capacity based on clamping blocks. Micro system Technologies Micro-and Nano system Information Storage and Processing Systems, 2015, 21(8):1757-1765.
22. Liang YH, Zhao Q, Han ZW, Zhang ZH*, Li XJ ,Ren LQ. Microstructures and Wear Behavior of the TiC Ceramic Particulate Locally Reinforced Steel Matrix Composites from a Cu-Ti-C System. ISIJ International, 2015, 55: 319-325.
23. Zhang BY, Zhang ZH*, Liang YH, Yan QQ, Ren LQ. Effects of laser parameters on the geometrical characteristics of peg-shaped bionic coupling unit. Optics and Laser Technology, 2014, 64: 184-194.
24. Wang SP, Zhang ZH*, Ren LQ, Zhao HW, Liang YH, Zhu B. A novel in situ device based on a bionic piezoelectric actuator to study tensile and fatigue properties of bulk materials. Review of Scientific Instruments, 2014, 85(6).
25. Li XJ, Zhang ZH*, Liang YH, Ren LQ, Jie M, Yang ZG. Antifatigue properties of dragonfly Pantala flavescens wings. Microscopy Research and Technique, 2014, 77(5): 356-362.
26. Zhou H, Zhang P, Zhang ZH*, Qiu WJ, Liu Y, Ren LQ. Thermal Cycling Effect on the Wear Resistance of Bionic Laser Processed Gray Iron. Journal of Bionic Engineering, 2014, 11(2): 288-295.
27. Zhang ZH, Lin PY, Ren LQ. Wear resistance of AZ91D magnesium alloy processed by improved laser surface remelting. Optics and Lasers in engineering, 2014, 55: 237-242.
28. Zhang ZH, Lin PY, Cong DL, Kong SH, Zhou H, Ren LQ. The characteristics of treated zone processed by pulsed Nd-YAG laser surface remelting on hot work steel. Optics and Laser Technology, 2014, 64: 227-234.
29. Lin PY, Zhang ZH*, Ren LQ. The mechanical properties and microstructures of AZ91D magnesium alloy processed by selective laser cladding with Al powder. Optics and Laser Technology, 2014, 60: 61-68.
30. Tong X, Dai MJ, Zhang ZH*. Thermal fatigue resistance of H13 steel treated by selective laser surface melting and CrNi alloying. Applied Surface Science, 2013, 271: 373-380.
31. Lin PY, Zhang ZH*, Zhou H, Ren LQ. The mechanical properties of medium carbon steel processed by a biomimetic laser technique. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2013, 560: 627-632.
32. Zhang ZH, Lin PY, Zhou H, Ren LQ. Microstructure, hardness, and thermal fatigue behavior of H21 steel processed by laser surface remelting. Applied Surface Science, 2013, 276: 62-67.
京公网安备 11010802027423号